From: Jens Taprogge Date: Tue, 11 Sep 2012 11:34:54 +0000 (+0200) Subject: Staging: ipack/bridges/tpci200: Put the TPCI200 control registers into a struct. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=28086cbdadc6ef7fc3600b8478e5d5b9bfe483b8;p=linux-beck.git Staging: ipack/bridges/tpci200: Put the TPCI200 control registers into a struct. This saves us from a little pointer arithmetic and cleans up the code a bit. Signed-off-by: Jens Taprogge Signed-off-by: Samuel Iglesias Gonsálvez Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c index 302fc21670d7..c88166de872f 100644 --- a/drivers/staging/ipack/bridges/tpci200.c +++ b/drivers/staging/ipack/bridges/tpci200.c @@ -14,14 +14,6 @@ #include #include "tpci200.h" -/* TPCI200 controls registers */ -static const int control_reg[] = { - TPCI200_CONTROL_A_REG, - TPCI200_CONTROL_B_REG, - TPCI200_CONTROL_C_REG, - TPCI200_CONTROL_D_REG -}; - static int tpci200_slot_unregister(struct ipack_device *dev); static struct tpci200_board *check_slot(struct ipack_device *dev) @@ -85,8 +77,7 @@ static irqreturn_t tpci200_interrupt(int irq, void *dev_id) irqreturn_t ret = IRQ_NONE; /* Read status register */ - status_reg = readw(tpci200->info->interface_regs + - TPCI200_STATUS_REG); + status_reg = readw(&tpci200->info->interface_regs->status); if (status_reg & TPCI200_SLOT_INT_MASK) { unhandled_ints = status_reg & TPCI200_SLOT_INT_MASK; @@ -107,7 +98,7 @@ static irqreturn_t tpci200_interrupt(int irq, void *dev_id) } } } - /* Interrupt not handled are disabled */ + /* Interrupts not handled are disabled */ if (unhandled_ints) { for (i = 0; i < TPCI200_NB_SLOT; i++) { if (unhandled_ints & ((TPCI200_INT0_EN | TPCI200_INT1_EN) << (2*i))) { @@ -115,13 +106,11 @@ static irqreturn_t tpci200_interrupt(int irq, void *dev_id) "No registered ISR for slot [%d:%d]!. IRQ will be disabled.\n", tpci200->number, i); reg_value = readw( - tpci200->info->interface_regs + - control_reg[i]); + &tpci200->info->interface_regs->control[i]); reg_value &= ~(TPCI200_INT0_EN | TPCI200_INT1_EN); writew(reg_value, - (tpci200->info->interface_regs + - control_reg[i])); + &tpci200->info->interface_regs->control[i]); } } } @@ -219,8 +208,7 @@ static int tpci200_register(struct tpci200_board *tpci200) (void __iomem *)mem_base + TPCI200_MEM8_GAP*i; tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE; - writew(slot_ctrl, (tpci200->info->interface_regs + - control_reg[i])); + writew(slot_ctrl, &tpci200->info->interface_regs->control[i]); } res = request_irq(tpci200->info->pdev->irq, @@ -259,8 +247,7 @@ static int __tpci200_request_irq(struct tpci200_board *tpci200, * clock rate 8 MHz */ slot_ctrl = TPCI200_INT0_EN | TPCI200_INT1_EN; - writew(slot_ctrl, (tpci200->info->interface_regs + - control_reg[dev->slot])); + writew(slot_ctrl, &tpci200->info->interface_regs->control[dev->slot]); return 0; } @@ -279,8 +266,7 @@ static void __tpci200_free_irq(struct tpci200_board *tpci200, * clock rate 8 MHz */ slot_ctrl = 0; - writew(slot_ctrl, (tpci200->info->interface_regs + - control_reg[dev->slot])); + writew(slot_ctrl, &tpci200->info->interface_regs->control[dev->slot]); } static int tpci200_free_irq(struct ipack_device *dev) diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/staging/ipack/bridges/tpci200.h index 38acba193a04..867d6960948d 100644 --- a/drivers/staging/ipack/bridges/tpci200.h +++ b/drivers/staging/ipack/bridges/tpci200.h @@ -37,13 +37,15 @@ #define TPCI200_MEM16_SPACE_BAR 4 #define TPCI200_MEM8_SPACE_BAR 5 -#define TPCI200_REVISION_REG 0x00 -#define TPCI200_CONTROL_A_REG 0x02 -#define TPCI200_CONTROL_B_REG 0x04 -#define TPCI200_CONTROL_C_REG 0x06 -#define TPCI200_CONTROL_D_REG 0x08 -#define TPCI200_RESET_REG 0x0A -#define TPCI200_STATUS_REG 0x0C +struct tpci200_regs { + u16 revision; + /* writes to control should occur with the mutex held to protect + * read-modify-write operations */ + u16 control[4]; + u16 reset; + u16 status; + u8 reserved[242]; +} __packed; #define TPCI200_IFACE_SIZE 0x100 @@ -63,6 +65,7 @@ #define TPCI200_MEM16_GAP 0x00800000 #define TPCI200_MEM16_SIZE 0x00800000 +/* control field in tpci200_regs */ #define TPCI200_INT0_EN 0x0040 #define TPCI200_INT1_EN 0x0080 #define TPCI200_INT0_EDGE 0x0010 @@ -72,11 +75,13 @@ #define TPCI200_RECOVER_EN 0x0002 #define TPCI200_CLK32 0x0001 +/* reset field in tpci200_regs */ #define TPCI200_A_RESET 0x0001 #define TPCI200_B_RESET 0x0002 #define TPCI200_C_RESET 0x0004 #define TPCI200_D_RESET 0x0008 +/* status field in tpci200_regs */ #define TPCI200_A_TIMEOUT 0x1000 #define TPCI200_B_TIMEOUT 0x2000 #define TPCI200_C_TIMEOUT 0x4000 @@ -149,7 +154,7 @@ struct tpci200_slot { struct tpci200_infos { struct pci_dev *pdev; struct pci_device_id *id_table; - void __iomem *interface_regs; + struct tpci200_regs __iomem *interface_regs; void __iomem *ioidint_space; void __iomem *mem8_space; void __iomem *cfg_regs;