From: Avri Altman Date: Sun, 24 Jan 2016 20:16:08 +0000 (+0200) Subject: iwlwifi: mvm: Send power command on BSS_CHANGED_BEACON_INFO if needed X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=283115fb1dcf6b2162e988db98e156b998a5ebb3;p=linux-beck.git iwlwifi: mvm: Send power command on BSS_CHANGED_BEACON_INFO if needed Beacon abort (ba) is set while sending power command, but only after at least one beacon_filter command was successfully sent. If we heard a beacon before starting association, this order is maintained and ba is properly set. However, if the first beacon is received after association, we send the power command upon association, configure the beacon filtering when the first beacon arrives, and in that case, beacon abort is not set. So identify this, and send a power command post the beacon_filter command if needed. Signed-off-by: Avri Altman Signed-off-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 86b4b9d81435..927b0559d42d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -1955,7 +1955,12 @@ static void iwl_mvm_bss_info_changed_station(struct iwl_mvm *mvm, WARN_ON(iwl_mvm_enable_beacon_filter(mvm, vif, 0)); } - if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | BSS_CHANGED_QOS)) { + if (changes & (BSS_CHANGED_PS | BSS_CHANGED_P2P_PS | BSS_CHANGED_QOS | + /* + * Send power command on every beacon change, + * because we may have not enabled beacon abort yet. + */ + BSS_CHANGED_BEACON_INFO)) { ret = iwl_mvm_power_update_mac(mvm); if (ret) IWL_ERR(mvm, "failed to update power mode\n");