From: Boris Brezillon Date: Tue, 7 Oct 2014 13:38:15 +0000 (+0200) Subject: pwm: add DT bindings documentation for atmel-hlcdc-pwm driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2899e12fc9864db600b2fe9707ebb97203fe4c00;p=linux-beck.git pwm: add DT bindings documentation for atmel-hlcdc-pwm driver The HLCDC IP available in some Atmel SoCs (i.e. at91sam9x5, at91sam9n12 or sama5d3 families for instance) provides a PWM device. The DT bindings used for this PWM device is following the default 3 cells bindings described in Documentation/devicetree/bindings/pwm/pwm.txt. Signed-off-by: Boris Brezillon Acked-by: Thierry Reding Acked-by: Nicolas Ferre Signed-off-by: Thierry Reding --- diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt new file mode 100644 index 000000000000..cfda0d57d302 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver + +The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. +See ../mfd/atmel-hlcdc.txt for more details. + +Required properties: + - compatible: value should be one of the following: + "atmel,hlcdc-pwm" + - pinctr-names: the pin control state names. Should contain "default". + - pinctrl-0: should contain the pinctrl states described by pinctrl + default. + - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells + bindings defined in pwm.txt in this directory. + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + };