From: William Breathitt Gray Date: Wed, 28 Sep 2016 18:00:01 +0000 (-0400) Subject: iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 X-Git-Tag: v4.10-rc1~148^2~508^2~85 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=28e5d3bb0325e71ef9b53a9cb4242cdfb55fd8c5;p=karo-tx-linux.git iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 The ACCES 104-QUAD-8 is a general purpose quadrature encoder counter/interface board. The 104-QUAD-8 is capable of monitoring the outputs of eight encoders via four on-board LSI/CSI LS7266R1 24-bit dual-axis quadrature counter chips. Core functions handled by the LS7266R1, such as direction and total count, are available. Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and also clears the counter's respective error flag. Although the counters have a 25-bit range, only the lower 24 bits may be set, either directly or via a counter's preset attribute. Interrupts are not supported by this driver. This driver adds IIO support for the ACCES 104-QUAD-8 and ACCES 104-QUAD-4. The base port addresses for the devices may be configured via the base array module parameter. Signed-off-by: William Breathitt Gray Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 new file mode 100644 index 000000000000..ba676520b953 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 @@ -0,0 +1,125 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available +What: /sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available +What: /sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available +What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available +What: /sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available +What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Discrete set of available values for the respective counter + configuration are listed in this file. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Read-only attribute that indicates whether the counter for + channel Y is counting up or down. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Count mode for channel Y. Four count modes are available: + normal, range limit, non-recycle, and modulo-n. The preset value + for channel Y is used by the count mode where required. + + Normal: + Counting is continuous in either direction. + + Range Limit: + An upper or lower limit is set, mimicking limit switches + in the mechanical counterpart. The upper limit is set to + the preset value, while the lower limit is set to 0. The + counter freezes at count = preset when counting up, and + at count = 0 when counting down. At either of these + limits, the counting is resumed only when the count + direction is reversed. + + Non-recycle: + Counter is disabled whenever a 24-bit count overflow or + underflow takes place. The counter is re-enabled when a + new count value is loaded to the counter via a preset + operation or write to raw. + + Modulo-N: + A count boundary is set between 0 and the preset value. + The counter is reset to 0 at count = preset when + counting up, while the counter is set to the preset + value at count = 0 when counting down; the counter does + not freeze at the bundary points, but counts + continuously throughout. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Read-only attribute that indicates whether excessive noise is + present at the channel Y count inputs in quadrature clock mode; + irrelevant in non-quadrature clock mode. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + If the counter device supports preset registers, the preset + count for channel Y is provided by this attribute. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Configure channel Y counter for non-quadrature or quadrature + clock mode. Selecting non-quadrature clock mode will disable + synchronous load mode. In quadrature clock mode, the channel Y + scale attribute selects the encoder phase division (scale of 1 + selects full-cycle, scale of 0.5 selects half-cycle, scale of + 0.25 selects quarter-cycle) processed by the channel Y counter. + + Non-quadrature: + The filter and decoder circuit are bypassed. Encoder A + input serves as the count input and B as the UP/DOWN + direction control input, with B = 1 selecting UP Count + mode and B = 0 selecting Down Count mode. + + Quadrature: + Encoder A and B inputs are digitally filtered and + decoded for UP/DN clock. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Whether to set channel Y counter with channel Y preset value + when channel Y index input is active, or continuously count. + Valid attribute values are boolean. + +What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Active level of channel Y index input; irrelevant in + non-synchronous load mode. + +What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode +KernelVersion: 4.9 +Contact: linux-iio@vger.kernel.org +Description: + Configure channel Y counter for non-synchronous or synchronous + load mode. Synchronous load mode cannot be selected in + non-quadrature clock mode. + + Non-synchronous: + A logic low level is the active level at this index + input. The index function (as enabled via + set_to_preset_on_index) is performed directly on the + active level of the index input. + + Synchronous: + Intended for interfacing with encoder Index output in + quadrature clock mode. The active level is configured + via index_polarity. The index function (as enabled via + set_to_preset_on_index) is performed synchronously with + the quadrature clock on the active level of the index + input. diff --git a/MAINTAINERS b/MAINTAINERS index e013c2be6d23..982dff301045 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -255,6 +255,12 @@ L: linux-gpio@vger.kernel.org S: Maintained F: drivers/gpio/gpio-104-idio-16.c +ACCES 104-QUAD-8 IIO DRIVER +M: William Breathitt Gray +L: linux-iio@vger.kernel.org +S: Maintained +F: drivers/iio/counter/104-quad-8.c + ACENIC DRIVER M: Jes Sorensen L: linux-acenic@sunsite.dk diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index a31a8cf2c330..a918270d6f54 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -73,6 +73,7 @@ source "drivers/iio/adc/Kconfig" source "drivers/iio/amplifiers/Kconfig" source "drivers/iio/chemical/Kconfig" source "drivers/iio/common/Kconfig" +source "drivers/iio/counter/Kconfig" source "drivers/iio/dac/Kconfig" source "drivers/iio/dummy/Kconfig" source "drivers/iio/frequency/Kconfig" diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index 2b6e2762a886..33fa4026f92c 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -18,6 +18,7 @@ obj-y += amplifiers/ obj-y += buffer/ obj-y += chemical/ obj-y += common/ +obj-y += counter/ obj-y += dac/ obj-y += dummy/ obj-y += gyro/ diff --git a/drivers/iio/counter/104-quad-8.c b/drivers/iio/counter/104-quad-8.c new file mode 100644 index 000000000000..2d2ee353dde7 --- /dev/null +++ b/drivers/iio/counter/104-quad-8.c @@ -0,0 +1,593 @@ +/* + * IIO driver for the ACCES 104-QUAD-8 + * Copyright (C) 2016 William Breathitt Gray + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * This driver supports the ACCES 104-QUAD-8 and ACCES 104-QUAD-4. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define QUAD8_EXTENT 32 + +static unsigned int base[max_num_isa_dev(QUAD8_EXTENT)]; +static unsigned int num_quad8; +module_param_array(base, uint, &num_quad8, 0); +MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses"); + +#define QUAD8_NUM_COUNTERS 8 + +/** + * struct quad8_iio - IIO device private data structure + * @preset: array of preset values + * @count_mode: array of count mode configurations + * @quadrature_mode: array of quadrature mode configurations + * @quadrature_scale: array of quadrature mode scale configurations + * @ab_enable: array of A and B inputs enable configurations + * @preset_enable: array of set_to_preset_on_index attribute configurations + * @synchronous_mode: array of index function synchronous mode configurations + * @index_polarity: array of index function polarity configurations + * @base: base port address of the IIO device + */ +struct quad8_iio { + unsigned int preset[QUAD8_NUM_COUNTERS]; + unsigned int count_mode[QUAD8_NUM_COUNTERS]; + unsigned int quadrature_mode[QUAD8_NUM_COUNTERS]; + unsigned int quadrature_scale[QUAD8_NUM_COUNTERS]; + unsigned int ab_enable[QUAD8_NUM_COUNTERS]; + unsigned int preset_enable[QUAD8_NUM_COUNTERS]; + unsigned int synchronous_mode[QUAD8_NUM_COUNTERS]; + unsigned int index_polarity[QUAD8_NUM_COUNTERS]; + unsigned int base; +}; + +static int quad8_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int *val, int *val2, long mask) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const int base_offset = priv->base + 2 * chan->channel; + unsigned int flags; + unsigned int borrow; + unsigned int carry; + int i; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->type == IIO_INDEX) { + *val = !!(inb(priv->base + 0x16) & BIT(chan->channel)); + return IIO_VAL_INT; + } + + flags = inb(base_offset); + borrow = flags & BIT(0); + carry = !!(flags & BIT(1)); + + /* Borrow XOR Carry effectively doubles count range */ + *val = (borrow ^ carry) << 24; + + /* Reset Byte Pointer; transfer Counter to Output Latch */ + outb(0x11, base_offset + 1); + + for (i = 0; i < 3; i++) + *val |= (unsigned int)inb(base_offset) << (8 * i); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_ENABLE: + *val = priv->ab_enable[chan->channel]; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + *val = 1; + *val2 = priv->quadrature_scale[chan->channel]; + return IIO_VAL_FRACTIONAL_LOG2; + } + + return -EINVAL; +} + +static int quad8_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, int val, int val2, long mask) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const int base_offset = priv->base + 2 * chan->channel; + int i; + unsigned int ior_cfg; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (chan->type == IIO_INDEX) + return -EINVAL; + + /* Only 24-bit values are supported */ + if ((unsigned int)val > 0xFFFFFF) + return -EINVAL; + + /* Reset Byte Pointer */ + outb(0x01, base_offset + 1); + + /* Counter can only be set via Preset Register */ + for (i = 0; i < 3; i++) + outb(val >> (8 * i), base_offset); + + /* Transfer Preset Register to Counter */ + outb(0x08, base_offset + 1); + + /* Reset Byte Pointer */ + outb(0x01, base_offset + 1); + + /* Set Preset Register back to original value */ + val = priv->preset[chan->channel]; + for (i = 0; i < 3; i++) + outb(val >> (8 * i), base_offset); + + /* Reset Borrow, Carry, Compare, and Sign flags */ + outb(0x02, base_offset + 1); + /* Reset Error flag */ + outb(0x06, base_offset + 1); + + return 0; + case IIO_CHAN_INFO_ENABLE: + /* only boolean values accepted */ + if (val < 0 || val > 1) + return -EINVAL; + + priv->ab_enable[chan->channel] = val; + + ior_cfg = val | priv->preset_enable[chan->channel] << 1; + + /* Load I/O control configuration */ + outb(0x40 | ior_cfg, base_offset); + + return 0; + case IIO_CHAN_INFO_SCALE: + /* Quadrature scaling only available in quadrature mode */ + if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1)) + return -EINVAL; + + /* Only three gain states (1, 0.5, 0.25) */ + if (val == 1 && !val2) + priv->quadrature_scale[chan->channel] = 0; + else if (!val) + switch (val2) { + case 500000: + priv->quadrature_scale[chan->channel] = 1; + break; + case 250000: + priv->quadrature_scale[chan->channel] = 2; + break; + default: + return -EINVAL; + } + else + return -EINVAL; + + return 0; + } + + return -EINVAL; +} + +static const struct iio_info quad8_info = { + .driver_module = THIS_MODULE, + .read_raw = quad8_read_raw, + .write_raw = quad8_write_raw +}; + +static ssize_t quad8_read_preset(struct iio_dev *indio_dev, uintptr_t private, + const struct iio_chan_spec *chan, char *buf) +{ + const struct quad8_iio *const priv = iio_priv(indio_dev); + + return snprintf(buf, PAGE_SIZE, "%u\n", priv->preset[chan->channel]); +} + +static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private, + const struct iio_chan_spec *chan, const char *buf, size_t len) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const int base_offset = priv->base + 2 * chan->channel; + unsigned int preset; + int ret; + int i; + + ret = kstrtouint(buf, 0, &preset); + if (ret) + return ret; + + /* Only 24-bit values are supported */ + if (preset > 0xFFFFFF) + return -EINVAL; + + priv->preset[chan->channel] = preset; + + /* Reset Byte Pointer */ + outb(0x01, base_offset + 1); + + /* Set Preset Register */ + for (i = 0; i < 3; i++) + outb(preset >> (8 * i), base_offset); + + return len; +} + +static ssize_t quad8_read_set_to_preset_on_index(struct iio_dev *indio_dev, + uintptr_t private, const struct iio_chan_spec *chan, char *buf) +{ + const struct quad8_iio *const priv = iio_priv(indio_dev); + + return snprintf(buf, PAGE_SIZE, "%u\n", + priv->preset_enable[chan->channel]); +} + +static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev, + uintptr_t private, const struct iio_chan_spec *chan, const char *buf, + size_t len) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const int base_offset = priv->base + 2 * chan->channel; + bool preset_enable; + int ret; + unsigned int ior_cfg; + + ret = kstrtobool(buf, &preset_enable); + if (ret) + return ret; + + priv->preset_enable[chan->channel] = preset_enable; + + ior_cfg = priv->ab_enable[chan->channel] | + (unsigned int)preset_enable << 1; + + /* Load I/O control configuration to Input / Output Control Register */ + outb(0x40 | ior_cfg, base_offset); + + return len; +} + +static const char *const quad8_noise_error_states[] = { + "No excessive noise is present at the count inputs", + "Excessive noise is present at the count inputs" +}; + +static int quad8_get_noise_error(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const int base_offset = priv->base + 2 * chan->channel + 1; + + return !!(inb(base_offset) & BIT(4)); +} + +static const struct iio_enum quad8_noise_error_enum = { + .items = quad8_noise_error_states, + .num_items = ARRAY_SIZE(quad8_noise_error_states), + .get = quad8_get_noise_error +}; + +static const char *const quad8_count_direction_states[] = { + "down", + "up" +}; + +static int quad8_get_count_direction(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const int base_offset = priv->base + 2 * chan->channel + 1; + + return !!(inb(base_offset) & BIT(5)); +} + +static const struct iio_enum quad8_count_direction_enum = { + .items = quad8_count_direction_states, + .num_items = ARRAY_SIZE(quad8_count_direction_states), + .get = quad8_get_count_direction +}; + +static const char *const quad8_count_modes[] = { + "normal", + "range limit", + "non-recycle", + "modulo-n" +}; + +static int quad8_set_count_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, unsigned int count_mode) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + unsigned int mode_cfg = count_mode << 1; + const int base_offset = priv->base + 2 * chan->channel + 1; + + priv->count_mode[chan->channel] = count_mode; + + /* Add quadrature mode configuration */ + if (priv->quadrature_mode[chan->channel]) + mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3; + + /* Load mode configuration to Counter Mode Register */ + outb(0x20 | mode_cfg, base_offset); + + return 0; +} + +static int quad8_get_count_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + const struct quad8_iio *const priv = iio_priv(indio_dev); + + return priv->count_mode[chan->channel]; +} + +static const struct iio_enum quad8_count_mode_enum = { + .items = quad8_count_modes, + .num_items = ARRAY_SIZE(quad8_count_modes), + .set = quad8_set_count_mode, + .get = quad8_get_count_mode +}; + +static const char *const quad8_synchronous_modes[] = { + "non-synchronous", + "synchronous" +}; + +static int quad8_set_synchronous_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, unsigned int synchronous_mode) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const unsigned int idr_cfg = synchronous_mode | + priv->index_polarity[chan->channel] << 1; + const int base_offset = priv->base + 2 * chan->channel + 1; + + /* Index function must be non-synchronous in non-quadrature mode */ + if (synchronous_mode && !priv->quadrature_mode[chan->channel]) + return -EINVAL; + + priv->synchronous_mode[chan->channel] = synchronous_mode; + + /* Load Index Control configuration to Index Control Register */ + outb(0x40 | idr_cfg, base_offset); + + return 0; +} + +static int quad8_get_synchronous_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + const struct quad8_iio *const priv = iio_priv(indio_dev); + + return priv->synchronous_mode[chan->channel]; +} + +static const struct iio_enum quad8_synchronous_mode_enum = { + .items = quad8_synchronous_modes, + .num_items = ARRAY_SIZE(quad8_synchronous_modes), + .set = quad8_set_synchronous_mode, + .get = quad8_get_synchronous_mode +}; + +static const char *const quad8_quadrature_modes[] = { + "non-quadrature", + "quadrature" +}; + +static int quad8_set_quadrature_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, unsigned int quadrature_mode) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + unsigned int mode_cfg = priv->count_mode[chan->channel] << 1; + const int base_offset = priv->base + 2 * chan->channel + 1; + + if (quadrature_mode) + mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3; + else { + /* Quadrature scaling only available in quadrature mode */ + priv->quadrature_scale[chan->channel] = 0; + + /* Synchronous function not supported in non-quadrature mode */ + if (priv->synchronous_mode[chan->channel]) + quad8_set_synchronous_mode(indio_dev, chan, 0); + } + + priv->quadrature_mode[chan->channel] = quadrature_mode; + + /* Load mode configuration to Counter Mode Register */ + outb(0x20 | mode_cfg, base_offset); + + return 0; +} + +static int quad8_get_quadrature_mode(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + const struct quad8_iio *const priv = iio_priv(indio_dev); + + return priv->quadrature_mode[chan->channel]; +} + +static const struct iio_enum quad8_quadrature_mode_enum = { + .items = quad8_quadrature_modes, + .num_items = ARRAY_SIZE(quad8_quadrature_modes), + .set = quad8_set_quadrature_mode, + .get = quad8_get_quadrature_mode +}; + +static const char *const quad8_index_polarity_modes[] = { + "negative", + "positive" +}; + +static int quad8_set_index_polarity(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, unsigned int index_polarity) +{ + struct quad8_iio *const priv = iio_priv(indio_dev); + const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] | + index_polarity << 1; + const int base_offset = priv->base + 2 * chan->channel + 1; + + priv->index_polarity[chan->channel] = index_polarity; + + /* Load Index Control configuration to Index Control Register */ + outb(0x40 | idr_cfg, base_offset); + + return 0; +} + +static int quad8_get_index_polarity(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + const struct quad8_iio *const priv = iio_priv(indio_dev); + + return priv->index_polarity[chan->channel]; +} + +static const struct iio_enum quad8_index_polarity_enum = { + .items = quad8_index_polarity_modes, + .num_items = ARRAY_SIZE(quad8_index_polarity_modes), + .set = quad8_set_index_polarity, + .get = quad8_get_index_polarity +}; + +static const struct iio_chan_spec_ext_info quad8_count_ext_info[] = { + { + .name = "preset", + .shared = IIO_SEPARATE, + .read = quad8_read_preset, + .write = quad8_write_preset + }, + { + .name = "set_to_preset_on_index", + .shared = IIO_SEPARATE, + .read = quad8_read_set_to_preset_on_index, + .write = quad8_write_set_to_preset_on_index + }, + IIO_ENUM("noise_error", IIO_SEPARATE, &quad8_noise_error_enum), + IIO_ENUM_AVAILABLE("noise_error", &quad8_noise_error_enum), + IIO_ENUM("count_direction", IIO_SEPARATE, &quad8_count_direction_enum), + IIO_ENUM_AVAILABLE("count_direction", &quad8_count_direction_enum), + IIO_ENUM("count_mode", IIO_SEPARATE, &quad8_count_mode_enum), + IIO_ENUM_AVAILABLE("count_mode", &quad8_count_mode_enum), + IIO_ENUM("quadrature_mode", IIO_SEPARATE, &quad8_quadrature_mode_enum), + IIO_ENUM_AVAILABLE("quadrature_mode", &quad8_quadrature_mode_enum), + {} +}; + +static const struct iio_chan_spec_ext_info quad8_index_ext_info[] = { + IIO_ENUM("synchronous_mode", IIO_SEPARATE, + &quad8_synchronous_mode_enum), + IIO_ENUM_AVAILABLE("synchronous_mode", &quad8_synchronous_mode_enum), + IIO_ENUM("index_polarity", IIO_SEPARATE, &quad8_index_polarity_enum), + IIO_ENUM_AVAILABLE("index_polarity", &quad8_index_polarity_enum), + {} +}; + +#define QUAD8_COUNT_CHAN(_chan) { \ + .type = IIO_COUNT, \ + .channel = (_chan), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_ENABLE) | BIT(IIO_CHAN_INFO_SCALE), \ + .ext_info = quad8_count_ext_info, \ + .indexed = 1 \ +} + +#define QUAD8_INDEX_CHAN(_chan) { \ + .type = IIO_INDEX, \ + .channel = (_chan), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .ext_info = quad8_index_ext_info, \ + .indexed = 1 \ +} + +static const struct iio_chan_spec quad8_channels[] = { + QUAD8_COUNT_CHAN(0), QUAD8_INDEX_CHAN(0), + QUAD8_COUNT_CHAN(1), QUAD8_INDEX_CHAN(1), + QUAD8_COUNT_CHAN(2), QUAD8_INDEX_CHAN(2), + QUAD8_COUNT_CHAN(3), QUAD8_INDEX_CHAN(3), + QUAD8_COUNT_CHAN(4), QUAD8_INDEX_CHAN(4), + QUAD8_COUNT_CHAN(5), QUAD8_INDEX_CHAN(5), + QUAD8_COUNT_CHAN(6), QUAD8_INDEX_CHAN(6), + QUAD8_COUNT_CHAN(7), QUAD8_INDEX_CHAN(7) +}; + +static int quad8_probe(struct device *dev, unsigned int id) +{ + struct iio_dev *indio_dev; + struct quad8_iio *priv; + int i, j; + unsigned int base_offset; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*priv)); + if (!indio_dev) + return -ENOMEM; + + if (!devm_request_region(dev, base[id], QUAD8_EXTENT, + dev_name(dev))) { + dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", + base[id], base[id] + QUAD8_EXTENT); + return -EBUSY; + } + + indio_dev->info = &quad8_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->num_channels = ARRAY_SIZE(quad8_channels); + indio_dev->channels = quad8_channels; + indio_dev->name = dev_name(dev); + + priv = iio_priv(indio_dev); + priv->base = base[id]; + + /* Reset all counters and disable interrupt function */ + outb(0x01, base[id] + 0x11); + /* Set initial configuration for all counters */ + for (i = 0; i < QUAD8_NUM_COUNTERS; i++) { + base_offset = base[id] + 2 * i; + /* Reset Byte Pointer */ + outb(0x01, base_offset + 1); + /* Reset Preset Register */ + for (j = 0; j < 3; j++) + outb(0x00, base_offset); + /* Reset Borrow, Carry, Compare, and Sign flags */ + outb(0x04, base_offset + 1); + /* Reset Error flag */ + outb(0x06, base_offset + 1); + /* Binary encoding; Normal count; non-quadrature mode */ + outb(0x20, base_offset + 1); + /* Disable A and B inputs; preset on index; FLG1 as Carry */ + outb(0x40, base_offset + 1); + /* Disable index function; negative index polarity */ + outb(0x60, base_offset + 1); + } + /* Enable all counters */ + outb(0x00, base[id] + 0x11); + + return devm_iio_device_register(dev, indio_dev); +} + +static struct isa_driver quad8_driver = { + .probe = quad8_probe, + .driver = { + .name = "104-quad-8" + } +}; + +module_isa_driver(quad8_driver, num_quad8); + +MODULE_AUTHOR("William Breathitt Gray "); +MODULE_DESCRIPTION("ACCES 104-QUAD-8 IIO driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig new file mode 100644 index 000000000000..44627f6e4861 --- /dev/null +++ b/drivers/iio/counter/Kconfig @@ -0,0 +1,24 @@ +# +# Counter devices +# +# When adding new entries keep the list in alphabetical order + +menu "Counters" + +config 104_QUAD_8 + tristate "ACCES 104-QUAD-8 driver" + depends on X86 && ISA_BUS_API + help + Say yes here to build support for the ACCES 104-QUAD-8 quadrature + encoder counter/interface device family (104-QUAD-8, 104-QUAD-4). + + Performing a write to a counter's IIO_CHAN_INFO_RAW sets the counter and + also clears the counter's respective error flag. Although the counters + have a 25-bit range, only the lower 24 bits may be set, either directly + or via a counter's preset attribute. Interrupts are not supported by + this driver. + + The base port addresses for the devices may be configured via the base + array module parameter. + +endmenu diff --git a/drivers/iio/counter/Makefile b/drivers/iio/counter/Makefile new file mode 100644 index 000000000000..007e88411648 --- /dev/null +++ b/drivers/iio/counter/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for IIO counter devices +# + +# When adding new entries keep the list in alphabetical order + +obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o