From: H Hartley Sweeten Date: Tue, 3 Jul 2012 01:13:11 +0000 (-0700) Subject: staging: comedi: dmm32at: remove dmm_outb macro X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=29f747c21e4318cc41efa82dac217da9ee8d5533;p=linux-beck.git staging: comedi: dmm32at: remove dmm_outb macro The macro is just a wrapper for outb(). Just use the outb() directly. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c index ee4e8ab3485b..2ae31e8aab40 100644 --- a/drivers/staging/comedi/drivers/dmm32at.c +++ b/drivers/staging/comedi/drivers/dmm32at.c @@ -78,8 +78,6 @@ Configuration Options: #define DMM32AT_DIOC 0x0e #define DMM32AT_DIOCONF 0x0f -#define dmm_outb(cdev, reg, valu) outb(valu, (cdev->iobase)+reg) - /* Board register values. */ /* DMM32AT_DACSTAT 0x04 */ @@ -221,13 +219,13 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev, /* printk("channel=0x%02x, range=%d\n",chan,range); */ /* zero scan and fifo control and reset fifo */ - dmm_outb(dev, DMM32AT_FIFOCNTRL, DMM32AT_FIFORESET); + outb(DMM32AT_FIFORESET, dev->iobase + DMM32AT_FIFOCNTRL); /* write the ai channel range regs */ - dmm_outb(dev, DMM32AT_AILOW, chan); - dmm_outb(dev, DMM32AT_AIHIGH, chan); + outb(chan, dev->iobase + DMM32AT_AILOW); + outb(chan, dev->iobase + DMM32AT_AIHIGH); /* set the range bits */ - dmm_outb(dev, DMM32AT_AICONF, dmm32at_rangebits[range]); + outb(dmm32at_rangebits[range], dev->iobase + DMM32AT_AICONF); /* wait for circuit to settle */ for (i = 0; i < 40000; i++) { @@ -243,7 +241,7 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev, /* convert n samples */ for (n = 0; n < insn->n; n++) { /* trigger conversion */ - dmm_outb(dev, DMM32AT_CONV, 0xff); + outb(0xff, dev->iobase + DMM32AT_CONV); /* wait for conversion to end */ for (i = 0; i < 40000; i++) { status = inb(dev->iobase + DMM32AT_AISTAT); @@ -489,23 +487,22 @@ static void dmm32at_setaitimer(struct comedi_device *dev, unsigned int nansec) lo2 = both2 & 0x00ff; /* set the counter frequency to 10mhz */ - dmm_outb(dev, DMM32AT_CNTRDIO, 0); + outb(0, dev->iobase + DMM32AT_CNTRDIO); /* get access to the clock regs */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_CLKACC); + outb(DMM32AT_CLKACC, dev->iobase + DMM32AT_CNTRL); /* write the counter 1 control word and low byte to counter */ - dmm_outb(dev, DMM32AT_CLKCT, DMM32AT_CLKCT1); - dmm_outb(dev, DMM32AT_CLK1, lo1); + outb(DMM32AT_CLKCT1, dev->iobase + DMM32AT_CLKCT); + outb(lo1, dev->iobase + DMM32AT_CLK1); /* write the counter 2 control word and low byte then to counter */ - dmm_outb(dev, DMM32AT_CLKCT, DMM32AT_CLKCT2); - dmm_outb(dev, DMM32AT_CLK2, lo2); - dmm_outb(dev, DMM32AT_CLK2, hi2); + outb(DMM32AT_CLKCT2, dev->iobase + DMM32AT_CLKCT); + outb(lo2, dev->iobase + DMM32AT_CLK2); + outb(hi2, dev->iobase + DMM32AT_CLK2); /* enable the ai conversion interrupt and the clock to start scans */ - dmm_outb(dev, DMM32AT_INTCLOCK, DMM32AT_ADINT | DMM32AT_CLKSEL); - + outb(DMM32AT_ADINT | DMM32AT_CLKSEL, dev->iobase + DMM32AT_INTCLOCK); } static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) @@ -525,20 +522,20 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) range = CR_RANGE(cmd->chanlist[0]); /* reset fifo */ - dmm_outb(dev, DMM32AT_FIFOCNTRL, DMM32AT_FIFORESET); + outb(DMM32AT_FIFORESET, dev->iobase + DMM32AT_FIFOCNTRL); /* set scan enable */ - dmm_outb(dev, DMM32AT_FIFOCNTRL, DMM32AT_SCANENABLE); + outb(DMM32AT_SCANENABLE, dev->iobase + DMM32AT_FIFOCNTRL); /* write the ai channel range regs */ - dmm_outb(dev, DMM32AT_AILOW, chanlo); - dmm_outb(dev, DMM32AT_AIHIGH, chanhi); + outb(chanlo, dev->iobase + DMM32AT_AILOW); + outb(chanhi, dev->iobase + DMM32AT_AIHIGH); /* set the range bits */ - dmm_outb(dev, DMM32AT_AICONF, dmm32at_rangebits[range]); + outb(dmm32at_rangebits[range], dev->iobase + DMM32AT_AICONF); /* reset the interrupt just in case */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_INTRESET); + outb(DMM32AT_INTRESET, dev->iobase + DMM32AT_CNTRL); if (cmd->stop_src == TRIG_COUNT) devpriv->ai_scans_left = cmd->stop_arg; @@ -563,8 +560,8 @@ static int dmm32at_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s) dmm32at_setaitimer(dev, cmd->scan_begin_arg); } else { /* start the interrups and initiate a single scan */ - dmm_outb(dev, DMM32AT_INTCLOCK, DMM32AT_ADINT); - dmm_outb(dev, DMM32AT_CONV, 0xff); + outb(DMM32AT_ADINT, dev->iobase + DMM32AT_INTCLOCK); + outb(0xff, dev->iobase + DMM32AT_CONV); } /* printk("dmmat32 in command\n"); */ @@ -619,7 +616,7 @@ static irqreturn_t dmm32at_isr(int irq, void *d) devpriv->ai_scans_left--; if (devpriv->ai_scans_left == 0) { /* disable further interrupts and clocks */ - dmm_outb(dev, DMM32AT_INTCLOCK, 0x0); + outb(0x0, dev->iobase + DMM32AT_INTCLOCK); /* set the buffer to be flushed with an EOF */ s->async->events |= COMEDI_CB_EOA; } @@ -630,7 +627,7 @@ static irqreturn_t dmm32at_isr(int irq, void *d) } /* reset the interrupt */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_INTRESET); + outb(DMM32AT_INTRESET, dev->iobase + DMM32AT_CNTRL); return IRQ_HANDLED; } @@ -654,8 +651,8 @@ static int dmm32at_ao_winsn(struct comedi_device *dev, hi = (data[i] >> 8) + chan * (1 << 6); /* printk("writing 0x%02x 0x%02x\n",hi,lo); */ /* write the low and high values to the board */ - dmm_outb(dev, DMM32AT_DACLSB, lo); - dmm_outb(dev, DMM32AT_DACMSB, hi); + outb(lo, dev->iobase + DMM32AT_DACLSB); + outb(hi, dev->iobase + DMM32AT_DACMSB); /* wait for circuit to settle */ for (i = 0; i < 40000; i++) { @@ -712,21 +709,21 @@ static int dmm32at_dio_insn_bits(struct comedi_device *dev, } /* get access to the DIO regs */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_DIOACC); + outb(DMM32AT_DIOACC, dev->iobase + DMM32AT_CNTRL); /* if either part of dio is set for output */ if (((devpriv->dio_config & DMM32AT_DIRCL) == 0) || ((devpriv->dio_config & DMM32AT_DIRCH) == 0)) { diobits = (s->state & 0x00ff0000) >> 16; - dmm_outb(dev, DMM32AT_DIOC, diobits); + outb(diobits, dev->iobase + DMM32AT_DIOC); } if ((devpriv->dio_config & DMM32AT_DIRB) == 0) { diobits = (s->state & 0x0000ff00) >> 8; - dmm_outb(dev, DMM32AT_DIOB, diobits); + outb(diobits, dev->iobase + DMM32AT_DIOB); } if ((devpriv->dio_config & DMM32AT_DIRA) == 0) { diobits = (s->state & 0x000000ff); - dmm_outb(dev, DMM32AT_DIOA, diobits); + outb(diobits, dev->iobase + DMM32AT_DIOA); } /* now read the state back in */ @@ -777,9 +774,9 @@ static int dmm32at_dio_insn_config(struct comedi_device *dev, else devpriv->dio_config |= chanbit; /* get access to the DIO regs */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_DIOACC); + outb(DMM32AT_DIOACC, dev->iobase + DMM32AT_CNTRL); /* set the DIO's to the new configuration setting */ - dmm_outb(dev, DMM32AT_DIOCONF, devpriv->dio_config); + outb(devpriv->dio_config, dev->iobase + DMM32AT_DIOCONF); return 1; } @@ -813,23 +810,23 @@ static int dmm32at_attach(struct comedi_device *dev, it to a known state */ /* reset the board */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_RESET); + outb(DMM32AT_RESET, dev->iobase + DMM32AT_CNTRL); /* allow a millisecond to reset */ udelay(1000); /* zero scan and fifo control */ - dmm_outb(dev, DMM32AT_FIFOCNTRL, 0x0); + outb(0x0, dev->iobase + DMM32AT_FIFOCNTRL); /* zero interrupt and clock control */ - dmm_outb(dev, DMM32AT_INTCLOCK, 0x0); + outb(0x0, dev->iobase + DMM32AT_INTCLOCK); /* write a test channel range, the high 3 bits should drop */ - dmm_outb(dev, DMM32AT_AILOW, 0x80); - dmm_outb(dev, DMM32AT_AIHIGH, 0xff); + outb(0x80, dev->iobase + DMM32AT_AILOW); + outb(0xff, dev->iobase + DMM32AT_AIHIGH); /* set the range at 10v unipolar */ - dmm_outb(dev, DMM32AT_AICONF, DMM32AT_RANGE_U10); + outb(DMM32AT_RANGE_U10, dev->iobase + DMM32AT_AICONF); /* should take 10 us to settle, here's a hundred */ udelay(100); @@ -908,11 +905,11 @@ static int dmm32at_attach(struct comedi_device *dev, if (board->have_dio) { /* get access to the DIO regs */ - dmm_outb(dev, DMM32AT_CNTRL, DMM32AT_DIOACC); + outb(DMM32AT_DIOACC, dev->iobase + DMM32AT_CNTRL); /* set the DIO's to the defualt input setting */ devpriv->dio_config = DMM32AT_DIRA | DMM32AT_DIRB | DMM32AT_DIRCL | DMM32AT_DIRCH | DMM32AT_DIENABLE; - dmm_outb(dev, DMM32AT_DIOCONF, devpriv->dio_config); + outb(devpriv->dio_config, dev->iobase + DMM32AT_DIOCONF); /* set up the subdevice */ s->type = COMEDI_SUBD_DIO;