From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri, 4 May 2012 23:17:49 +0000 (-0700)
Subject: USB: quatech_usb2.c: remove dbg() tracing calls
X-Git-Tag: v3.5-rc1~149^2~143
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2af588d5f093fd8212bfe7151183a535e8e9117b;p=karo-tx-linux.git

USB: quatech_usb2.c: remove dbg() tracing calls

dbg() was used a lot a long time ago to trace code flow.  Now that we have
ftrace, this isn't needed at all, so remove these calls.

CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Mauro Carvalho Chehab <mchehab@redhat.com>
CC: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index 679b249b11cb..7739ada045e6 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -415,8 +415,6 @@ static void qt2_release(struct usb_serial *serial)
 	struct quatech2_port *qt_port;
 	int i;
 
-	dbg("enterting %s", __func__);
-
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
 		if (!port)
@@ -455,8 +453,6 @@ int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (port_paranoia_check(port, __func__))
 		return -ENODEV;
 
-	dbg("%s(): port %d", __func__, port->number);
-
 	serial = port->serial;	/* get the parent device structure */
 	if (serial_paranoia_check(serial, __func__)) {
 		dbg("usb_serial struct failed sanity check");
@@ -636,7 +632,6 @@ static void qt2_close(struct usb_serial_port *port)
 	__u8  lsr_value = 0;	/* value of Line Status Register */
 	int status;	/* result of last USB comms function */
 
-	dbg("%s(): port %d", __func__, port->number);
 	serial = port->serial;	/* get the parent device structure */
 	dev_extra = qt2_get_dev_private(serial);
 	/* get the device private data */
@@ -971,10 +966,7 @@ static void qt2_set_termios(struct tty_struct *tty,
 	int status;
 	__u16 UartNumber;
 
-	dbg("%s(): port %d", __func__, port->number);
-
 	serial = port->serial;
-
 	UartNumber = port->number;
 
 	if (old_termios && !tty_termios_hw_change(old_termios, tty->termios))
@@ -1096,9 +1088,7 @@ static int qt2_tiocmget(struct tty_struct *tty)
 	if (serial == NULL)
 		return -ENODEV;
 
-	dbg("%s(): port %d, tty =0x%p", __func__, port->number, tty);
 	UartNumber = tty->index - serial->minor;
-	dbg("UartNumber is %d", UartNumber);
 
 	status = qt2_box_get_register(port->serial, UartNumber,
 			QT2_MODEM_CONTROL_REGISTER,	&mcr_value);
@@ -1138,7 +1128,6 @@ static int qt2_tiocmset(struct tty_struct *tty,
 		return -ENODEV;
 
 	UartNumber = tty->index - serial->minor;
-	dbg("%s(): port %d, UartNumber %d", __func__, port->number, UartNumber);
 
 	status = qt2_box_get_register(port->serial, UartNumber,
 			QT2_MODEM_CONTROL_REGISTER, &mcr_value);
@@ -1198,7 +1187,6 @@ static void qt2_break(struct tty_struct *tty, int break_state)
 				port->number, NULL, 0, 300);
 exit:
 	mutex_unlock(&port_extra->modelock);
-	dbg("%s(): exit port %d", __func__, port->number);
 
 }
 /**
@@ -1209,7 +1197,6 @@ static void qt2_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct quatech2_port *port_extra;	/* extra data for this port */
-	dbg("%s(): port %d", __func__, port->number);
 
 	port_extra = qt2_get_port_private(port);
 	if (!serial) {
@@ -1255,7 +1242,6 @@ static void qt2_unthrottle(struct tty_struct *tty)
 			port->number);
 		return;
 	}
-	dbg("%s(): enter port %d", __func__, port->number);
 	dev_extra = qt2_get_dev_private(serial);
 	port_extra = qt2_get_port_private(port);
 	port0 = serial->port[0]; /* get the first port's device structure */
@@ -1285,7 +1271,6 @@ static void qt2_unthrottle(struct tty_struct *tty)
 	}
 exit:
 	mutex_unlock(&port_extra->modelock);
-	dbg("%s(): exit port %d", __func__, port->number);
 	return;
 }
 
@@ -1682,7 +1667,6 @@ __func__);
 	/* cribbed from serqt_usb2 driver, but not sure which work needs
 	 * scheduling - port0 or currently active port? */
 	/* schedule_work(&port->work); */
-	dbg("%s() completed", __func__);
 	return;
 }
 
@@ -1696,7 +1680,7 @@ static void qt2_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
 	struct usb_serial *serial = port->serial;
-	dbg("%s(): port %d", __func__, port->number);
+
 	if (!serial) {
 		dbg("%s(): bad serial pointer, exiting", __func__);
 		return;
@@ -1711,7 +1695,6 @@ static void qt2_write_bulk_callback(struct urb *urb)
 	 */
 	/*port_softint((void *) serial); commented in vendor driver */
 	schedule_work(&port->work);
-	dbg("%s(): port %d exit", __func__, port->number);
 	return;
 }