From: Jun Nie Date: Fri, 31 Jul 2015 07:49:17 +0000 (+0800) Subject: uart: pl011: Introduce register look up table X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2c096a9eedc6841d3610545f4e6c3d72bd0962be;p=linux-beck.git uart: pl011: Introduce register look up table Introduce register look up table as different SOC venders may have different register offset for the some register. Signed-off-by: Jun Nie Reviewed-by: Peter Hurley Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 29a291d3bf24..e1f3bd5afad6 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -76,6 +76,7 @@ struct vendor_data { unsigned int ifls; unsigned int lcrh_tx; unsigned int lcrh_rx; + u16 *reg_lut; bool oversampling; bool dma_threshold; bool cts_event_workaround; @@ -107,6 +108,25 @@ enum reg_idx { REG_DMACR = IDX(UART011_DMACR), }; +static u16 arm_reg[] = { + [REG_DR] = UART01x_DR, + [REG_RSR] = UART01x_RSR, + [REG_ST_DMAWM] = ~0, + [REG_FR] = UART01x_FR, + [REG_ST_LCRH_RX] = ~0, + [REG_ILPR] = UART01x_ILPR, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_LCRH] = UART011_LCRH, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, +}; + static unsigned int get_fifosize_arm(struct amba_device *dev) { return amba_rev(dev) < 3 ? 16 : 32; @@ -116,6 +136,7 @@ static struct vendor_data vendor_arm = { .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, .lcrh_tx = REG_LCRH, .lcrh_rx = REG_LCRH, + .reg_lut = arm_reg, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -125,6 +146,7 @@ static struct vendor_data vendor_arm = { }; static struct vendor_data vendor_sbsa = { + .reg_lut = arm_reg, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -132,6 +154,25 @@ static struct vendor_data vendor_sbsa = { .fixed_options = true, }; +static u16 st_reg[] = { + [REG_DR] = UART01x_DR, + [REG_RSR] = UART01x_RSR, + [REG_ST_DMAWM] = ST_UART011_DMAWM, + [REG_FR] = UART01x_FR, + [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX, + [REG_ILPR] = UART01x_ILPR, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_LCRH] = UART011_LCRH, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, +}; + static unsigned int get_fifosize_st(struct amba_device *dev) { return 64; @@ -141,6 +182,7 @@ static struct vendor_data vendor_st = { .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, .lcrh_tx = REG_LCRH, .lcrh_rx = REG_ST_LCRH_RX, + .reg_lut = st_reg, .oversampling = true, .dma_threshold = true, .cts_event_workaround = true, @@ -186,6 +228,7 @@ struct uart_amba_port { struct uart_port port; struct clk *clk; const struct vendor_data *vendor; + u16 *reg_lut; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ unsigned int old_status; @@ -209,19 +252,19 @@ struct uart_amba_port { static unsigned int pl011_readw(struct uart_amba_port *uap, int index) { WARN_ON(index > REG_NR); - return readw_relaxed(uap->port.membase + (index << 2)); + return readw_relaxed(uap->port.membase + uap->reg_lut[index]); } static void pl011_writew(struct uart_amba_port *uap, int val, int index) { WARN_ON(index > REG_NR); - writew_relaxed(val, uap->port.membase + (index << 2)); + writew_relaxed(val, uap->port.membase + uap->reg_lut[index]); } static void pl011_writeb(struct uart_amba_port *uap, u8 val, int index) { WARN_ON(index > REG_NR); - writeb_relaxed(val, uap->port.membase + (index << 2)); + writeb_relaxed(val, uap->port.membase + uap->reg_lut[index]); } /* @@ -324,7 +367,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); struct device *dev = uap->port.dev; struct dma_slave_config tx_conf = { - .dst_addr = uap->port.mapbase + REG_DR, + .dst_addr = uap->port.mapbase + uap->reg_lut[REG_DR], .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, @@ -379,7 +422,7 @@ static void pl011_dma_probe(struct uart_amba_port *uap) if (chan) { struct dma_slave_config rx_conf = { - .src_addr = uap->port.mapbase + REG_DR, + .src_addr = uap->port.mapbase + uap->reg_lut[REG_DR], .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 2, @@ -2413,6 +2456,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) return PTR_ERR(uap->clk); uap->vendor = vendor; + uap->reg_lut = vendor->reg_lut; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; uap->fifosize = vendor->get_fifosize(dev); @@ -2494,6 +2538,7 @@ static int sbsa_uart_probe(struct platform_device *pdev) return -ENOMEM; uap->vendor = &vendor_sbsa; + uap->reg_lut = vendor_sbsa.reg_lut; uap->fifosize = 32; uap->port.irq = platform_get_irq(pdev, 0); uap->port.ops = &sbsa_uart_pops;