From: H Hartley Sweeten Date: Wed, 19 Sep 2012 22:11:04 +0000 (-0700) Subject: staging: comedi: s526: remove cut-and-paste comments from skel driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2c7817891dbc44612ac59a7d627716fae240b3a7;p=linux-beck.git staging: comedi: s526: remove cut-and-paste comments from skel driver These comments are not necessary, they are just cut-and-paste from the skel driver. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/s526.c b/drivers/staging/comedi/drivers/s526.c index 1ae250baa79d..0f1ef9875ec5 100644 --- a/drivers/staging/comedi/drivers/s526.c +++ b/drivers/staging/comedi/drivers/s526.c @@ -138,11 +138,6 @@ struct s526GPCTConfig { int data[MAX_GPCT_CONFIG_DATA]; }; -/* - * Board descriptions for two imaginary boards. Describing the - * boards in this way is optional, and completely driver-dependent. - * Some drivers use arrays such as this, other do not. - */ struct s526_board { const char *name; int gpct_chans; @@ -167,11 +162,6 @@ static const struct s526_board s526_boards[] = { } }; -/* this structure is for data unique to this hardware driver. If - several hardware drivers keep similar information in this structure, - feel free to suggest moving the variable to the struct comedi_device - struct. -*/ struct s526_private { unsigned int ao_readback[2]; struct s526GPCTConfig s526_gpct_config[4]; @@ -496,10 +486,6 @@ static int s526_ai_insn_config(struct comedi_device *dev, return result; } -/* - * "instructions" read/write data in "one-shot" or "software-triggered" - * mode. - */ static int s526_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { @@ -552,30 +538,18 @@ static int s526_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, unsigned short val; val = chan << 1; -/* outw(val, dev->iobase + REG_DAC); */ outw(val, dev->iobase + REG_DAC); - /* Writing a list of values to an AO channel is probably not - * very useful, but that's how the interface is defined. */ for (i = 0; i < insn->n; i++) { - /* a typical programming sequence */ - /* write the data to preload register - * outw(data[i], dev->iobase + REG_ADD); - */ - /* write the data to preload register */ outw(data[i], dev->iobase + REG_ADD); devpriv->ao_readback[chan] = data[i]; -/* outw(val + 1, dev->iobase + REG_DAC); starts the D/A conversion. */ /* starts the D/A conversion */ outw(val + 1, dev->iobase + REG_DAC); } - /* return the number of samples read/written */ return i; } -/* AO subdevices should have a read insn as well as a write insn. - * Usually this means copying a value stored in devpriv. */ static int s526_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { @@ -589,30 +563,18 @@ static int s526_ao_rinsn(struct comedi_device *dev, struct comedi_subdevice *s, return i; } -/* DIO devices are slightly special. Although it is possible to - * implement the insn_read/insn_write interface, it is much more - * useful to applications if you implement the insn_bits interface. - * This allows packed reading/writing of the DIO channels. The - * comedi core can convert between insn_bits and insn_read/write */ static int s526_dio_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, unsigned int *data) { - /* The insn data is a mask in data[0] and the new data - * in data[1], each channel cooresponding to a bit. */ if (data[0]) { s->state &= ~data[0]; s->state |= data[0] & data[1]; - /* Write out the new digital output lines */ + outw(s->state, dev->iobase + REG_DIO); } - /* on return, data[1] contains the value of the digital - * input and output lines. */ data[1] = inw(dev->iobase + REG_DIO) & 0xff; - /* or we could just return the software copy of the output values if - * it was a purely digital output subdevice */ - /* data[1]=s->state & 0xFF; */ return insn->n; } @@ -624,11 +586,6 @@ static int s526_dio_insn_config(struct comedi_device *dev, int chan = CR_CHAN(insn->chanspec); int group, mask; - /* The input or output configuration of each digital line is - * configured by a special insn_config instruction. chanspec - * contains the channel to be changed, and data[0] contains the - * value COMEDI_INPUT or COMEDI_OUTPUT. */ - group = chan >> 2; mask = 0xF << (group << 2); switch (data[0]) { @@ -682,33 +639,22 @@ static int s526_attach(struct comedi_device *dev, struct comedi_devconfig *it) /* GENERAL-PURPOSE COUNTER/TIME (GPCT) */ s->type = COMEDI_SUBD_COUNTER; s->subdev_flags = SDF_READABLE | SDF_WRITABLE | SDF_LSAMPL; - /* KG: What does SDF_LSAMPL (see multiq3.c) mean? */ s->n_chan = board->gpct_chans; s->maxdata = 0x00ffffff; /* 24 bit counter */ s->insn_read = s526_gpct_rinsn; s->insn_config = s526_gpct_insn_config; s->insn_write = s526_gpct_winsn; - /* Command are not implemented yet, however they are necessary to - allocate the necessary memory for the comedi_async struct (used - to trigger the GPCT in case of pulsegenerator function */ - /* s->do_cmd = s526_gpct_cmd; */ - /* s->do_cmdtest = s526_gpct_cmdtest; */ - /* s->cancel = s526_gpct_cancel; */ - s = &dev->subdevices[1]; - /* dev->read_subdev=s; */ /* analog input subdevice */ s->type = COMEDI_SUBD_AI; - /* we support differential */ s->subdev_flags = SDF_READABLE | SDF_DIFF; /* channels 0 to 7 are the regular differential inputs */ /* channel 8 is "reference 0" (+10V), channel 9 is "reference 1" (0V) */ s->n_chan = 10; s->maxdata = 0xffff; s->range_table = &range_bipolar10; - s->len_chanlist = 16; /* This is the maximum chanlist length that - the board can handle */ + s->len_chanlist = 16; s->insn_read = s526_ai_rinsn; s->insn_config = s526_ai_insn_config;