From: John Youn Date: Sat, 6 Feb 2016 01:08:59 +0000 (-0800) Subject: usb: dwc3: Update maximum_speed for SuperSpeedPlus X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2c7f1bd9127a1a49ee25d9c2b2ce17b11c7fb05f;p=linux-beck.git usb: dwc3: Update maximum_speed for SuperSpeedPlus If the maximum_speed is not set, set it to a known value, either SuperSpeed or SuperSpeedPlus based on the type of controller we are using. If we are on DWC_usb31 controller, check the PHY interface to see if it is capable of SuperSpeedPlus. Also this check is moved after dwc3_core_init() so that we can check dwc->revision. Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index de5e01f41bc2..001c755c83c0 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -962,10 +962,6 @@ static int dwc3_probe(struct platform_device *pdev) fladj = pdata->fladj_value; } - /* default to superspeed if no maximum_speed passed */ - if (dwc->maximum_speed == USB_SPEED_UNKNOWN) - dwc->maximum_speed = USB_SPEED_SUPER; - dwc->lpm_nyet_threshold = lpm_nyet_threshold; dwc->tx_de_emphasis = tx_de_emphasis; @@ -1016,6 +1012,19 @@ static int dwc3_probe(struct platform_device *pdev) goto err1; } + /* default to superspeed if no maximum_speed passed */ + if (dwc->maximum_speed == USB_SPEED_UNKNOWN) { + dwc->maximum_speed = USB_SPEED_SUPER; + + /* + * default to superspeed plus if we are capable. + */ + if (dwc3_is_usb31(dwc) && + (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == + DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) + dwc->maximum_speed = USB_SPEED_SUPER_PLUS; + } + /* Adjust Frame Length */ dwc3_frame_length_adjustment(dwc, fladj);