From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Thu, 17 Jul 2014 18:57:53 +0000 (-0700)
Subject: staging: comedi: hwdrv_apci3120: remove use of comedi_error()
X-Git-Tag: v3.17-rc1~123^2~551
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2c856780b39af4d1f96ca33811dab6ccf6ff545f;p=karo-tx-linux.git

staging: comedi: hwdrv_apci3120: remove use of comedi_error()

The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.

Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index bfa154d3fea6..6e6122630ec1 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -318,7 +318,8 @@ static int apci3120_setup_chan_list(struct comedi_device *dev,
 	/* correct channel and range number check itself comedi/range.c */
 	if (n_chan < 1) {
 		if (!check)
-			comedi_error(dev, "range/channel list is empty!");
+			dev_err(dev->class_dev,
+				"range/channel list is empty!\n");
 		return 0;
 	}
 	/*  All is ok, so we can setup channel/range list */
@@ -1373,10 +1374,10 @@ static void apci3120_interrupt_dma(int irq, void *d)
 
 	if (samplesinbuf <
 		devpriv->ui_DmaBufferUsesize[devpriv->ui_DmaActualBuffer]) {
-		comedi_error(dev, "Interrupted DMA transfer!");
+		dev_err(dev->class_dev, "Interrupted DMA transfer!\n");
 	}
 	if (samplesinbuf & 1) {
-		comedi_error(dev, "Odd count of bytes in DMA ring!");
+		dev_err(dev->class_dev, "Odd count of bytes in DMA ring!\n");
 		apci3120_cancel(dev, s);
 		return;
 	}
@@ -1548,7 +1549,7 @@ static void apci3120_interrupt(int irq, void *d)
 	int_amcc = inl(devpriv->i_IobaseAmcc + AMCC_OP_REG_INTCSR);	/*  get AMCC int register */
 
 	if ((!int_daq) && (!(int_amcc & ANY_S593X_INT))) {
-		comedi_error(dev, "IRQ from unknown source");
+		dev_err(dev->class_dev, "IRQ from unknown source\n");
 		return;
 	}
 
@@ -1565,9 +1566,9 @@ static void apci3120_interrupt(int irq, void *d)
 	inb(devpriv->i_IobaseAmcc + APCI3120_TIMER_STATUS_REGISTER);
 
 	if (int_amcc & MASTER_ABORT_INT)
-		comedi_error(dev, "AMCC IRQ - MASTER DMA ABORT!");
+		dev_err(dev->class_dev, "AMCC IRQ - MASTER DMA ABORT!\n");
 	if (int_amcc & TARGET_ABORT_INT)
-		comedi_error(dev, "AMCC IRQ - TARGET DMA ABORT!");
+		dev_err(dev->class_dev, "AMCC IRQ - TARGET DMA ABORT!\n");
 
 	/*  Ckeck if EOC interrupt */
 	if (((int_daq & 0x8) == 0)
@@ -1740,7 +1741,7 @@ static int apci3120_config_insn_timer(struct comedi_device *dev,
 	unsigned char b_Tmp;
 
 	if (!data[1])
-		comedi_error(dev, "config:No timer constant !");
+		dev_err(dev->class_dev, "No timer constant!\n");
 
 	devpriv->b_Timer2Interrupt = (unsigned char) data[2];	/*  save info whether to enable or disable interrupt */
 
@@ -1886,14 +1887,14 @@ static int apci3120_write_insn_timer(struct comedi_device *dev,
 
 	if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG)
 		&& (devpriv->b_Timer2Mode != APCI3120_TIMER)) {
-		comedi_error(dev, "\nwrite:timer2  not configured ");
+		dev_err(dev->class_dev, "timer2 not configured\n");
 		return -EINVAL;
 	}
 
 	if (data[0] == 2) {	/*  write new value */
 		if (devpriv->b_Timer2Mode != APCI3120_TIMER) {
-			comedi_error(dev,
-				"write :timer2  not configured  in TIMER MODE");
+			dev_err(dev->class_dev,
+				"timer2 not configured in TIMER MODE\n");
 			return -EINVAL;
 		}
 
@@ -1991,8 +1992,8 @@ static int apci3120_write_insn_timer(struct comedi_device *dev,
 
 	case 2:		/* write new value to Timer */
 		if (devpriv->b_Timer2Mode != APCI3120_TIMER) {
-			comedi_error(dev,
-				"write :timer2  not configured  in TIMER MODE");
+			dev_err(dev->class_dev,
+				"timer2 not configured in TIMER MODE\n");
 			return -EINVAL;
 		}
 		/*  ui_Timervalue2=data[1]; // passed as argument */
@@ -2056,7 +2057,7 @@ static int apci3120_read_insn_timer(struct comedi_device *dev,
 
 	if ((devpriv->b_Timer2Mode != APCI3120_WATCHDOG)
 		&& (devpriv->b_Timer2Mode != APCI3120_TIMER)) {
-		comedi_error(dev, "\nread:timer2  not configured ");
+		dev_err(dev->class_dev, "timer2 not configured\n");
 	}
 
 	/* this_board->timer_read(dev,data); */