From: Jon Arne Jørgensen Date: Sat, 3 Aug 2013 12:19:37 +0000 (-0300) Subject: [media] saa7115: Implement i2c_board_info.platform_data X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2ccf12a;p=linux-beck.git [media] saa7115: Implement i2c_board_info.platform_data This patch implements i2c_board_info.platform_data, and some options to override the default initialization table for the GM7113C and SAA7113 chips. Signed-off-by: Jon Arne Jørgensen Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c index 17a464d4e526..5cc48f751b3a 100644 --- a/drivers/media/i2c/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -225,19 +225,59 @@ static const unsigned char saa7111_init[] = { 0x00, 0x00 }; -/* SAA7113/GM7113C init codes - * It's important that R_14... R_17 == 0x00 - * for the gm7113c chip to deliver stable video - */ +/* This table has one illegal value, and some values that are not + correct according to the datasheet initialization table. + + If you need a table with legal/default values tell the driver in + i2c_board_info.platform_data, and you will get the gm7113c_init + table instead. */ + +/* SAA7113 Init codes */ static const unsigned char saa7113_init[] = { R_01_INC_DELAY, 0x08, R_02_INPUT_CNTL_1, 0xc2, R_03_INPUT_CNTL_2, 0x30, R_04_INPUT_CNTL_3, 0x00, R_05_INPUT_CNTL_4, 0x00, - R_06_H_SYNC_START, 0x89, + R_06_H_SYNC_START, 0x89, /* Illegal value -119, + * min. value = -108 (0x94) */ + R_07_H_SYNC_STOP, 0x0d, + R_08_SYNC_CNTL, 0x88, /* Not datasheet default. + * HTC = VTR mode, should be 0x98 */ + R_09_LUMA_CNTL, 0x01, + R_0A_LUMA_BRIGHT_CNTL, 0x80, + R_0B_LUMA_CONTRAST_CNTL, 0x47, + R_0C_CHROMA_SAT_CNTL, 0x40, + R_0D_CHROMA_HUE_CNTL, 0x00, + R_0E_CHROMA_CNTL_1, 0x01, + R_0F_CHROMA_GAIN_CNTL, 0x2a, + R_10_CHROMA_CNTL_2, 0x08, /* Not datsheet default. + * VRLN enabled, should be 0x00 */ + R_11_MODE_DELAY_CNTL, 0x0c, + R_12_RT_SIGNAL_CNTL, 0x07, /* Not datasheet default, + * should be 0x01 */ + R_13_RT_X_PORT_OUT_CNTL, 0x00, + R_14_ANAL_ADC_COMPAT_CNTL, 0x00, + R_15_VGATE_START_FID_CHG, 0x00, + R_16_VGATE_STOP, 0x00, + R_17_MISC_VGATE_CONF_AND_MSB, 0x00, + + 0x00, 0x00 +}; + +/* GM7113C is a clone of the SAA7113 chip + This init table is copied out of the saa7113 datasheet. + In R_08 we enable "Automatic Field Detection" [AUFD], + this is disabled when saa711x_set_v4lstd is called. */ +static const unsigned char gm7113c_init[] = { + R_01_INC_DELAY, 0x08, + R_02_INPUT_CNTL_1, 0xc0, + R_03_INPUT_CNTL_2, 0x33, + R_04_INPUT_CNTL_3, 0x00, + R_05_INPUT_CNTL_4, 0x00, + R_06_H_SYNC_START, 0xe9, R_07_H_SYNC_STOP, 0x0d, - R_08_SYNC_CNTL, 0x88, + R_08_SYNC_CNTL, 0x98, R_09_LUMA_CNTL, 0x01, R_0A_LUMA_BRIGHT_CNTL, 0x80, R_0B_LUMA_CONTRAST_CNTL, 0x47, @@ -245,9 +285,9 @@ static const unsigned char saa7113_init[] = { R_0D_CHROMA_HUE_CNTL, 0x00, R_0E_CHROMA_CNTL_1, 0x01, R_0F_CHROMA_GAIN_CNTL, 0x2a, - R_10_CHROMA_CNTL_2, 0x08, + R_10_CHROMA_CNTL_2, 0x00, R_11_MODE_DELAY_CNTL, 0x0c, - R_12_RT_SIGNAL_CNTL, 0x07, + R_12_RT_SIGNAL_CNTL, 0x01, R_13_RT_X_PORT_OUT_CNTL, 0x00, R_14_ANAL_ADC_COMPAT_CNTL, 0x00, R_15_VGATE_START_FID_CHG, 0x00, @@ -1585,6 +1625,65 @@ static const struct v4l2_subdev_ops saa711x_ops = { /* ----------------------------------------------------------------------- */ +static void saa711x_write_platform_data(struct saa711x_state *state, + struct saa7115_platform_data *data) +{ + struct v4l2_subdev *sd = &state->sd; + u8 work; + + if (state->ident != GM7113C && + state->ident != SAA7113) + return; + + if (data->saa7113_r08_htc) { + work = saa711x_read(sd, R_08_SYNC_CNTL); + work &= ~SAA7113_R_08_HTC_MASK; + work |= ((*data->saa7113_r08_htc) << SAA7113_R_08_HTC_OFFSET); + saa711x_write(sd, R_08_SYNC_CNTL, work); + } + + if (data->saa7113_r10_vrln) { + work = saa711x_read(sd, R_10_CHROMA_CNTL_2); + work &= ~SAA7113_R_10_VRLN_MASK; + if (*data->saa7113_r10_vrln) + work |= (1 << SAA7113_R_10_VRLN_OFFSET); + saa711x_write(sd, R_10_CHROMA_CNTL_2, work); + } + + if (data->saa7113_r10_ofts) { + work = saa711x_read(sd, R_10_CHROMA_CNTL_2); + work &= ~SAA7113_R_10_OFTS_MASK; + work |= (*data->saa7113_r10_ofts << SAA7113_R_10_OFTS_OFFSET); + saa711x_write(sd, R_10_CHROMA_CNTL_2, work); + } + + if (data->saa7113_r12_rts0) { + work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); + work &= ~SAA7113_R_12_RTS0_MASK; + work |= (*data->saa7113_r12_rts0 << SAA7113_R_12_RTS0_OFFSET); + + /* According to the datasheet, + * SAA7113_RTS_DOT_IN should only be used on RTS1 */ + WARN_ON(*data->saa7113_r12_rts0 == SAA7113_RTS_DOT_IN); + saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); + } + + if (data->saa7113_r12_rts1) { + work = saa711x_read(sd, R_12_RT_SIGNAL_CNTL); + work &= ~SAA7113_R_12_RTS1_MASK; + work |= (*data->saa7113_r12_rts1 << SAA7113_R_12_RTS1_OFFSET); + saa711x_write(sd, R_12_RT_SIGNAL_CNTL, work); + } + + if (data->saa7113_r13_adlsb) { + work = saa711x_read(sd, R_13_RT_X_PORT_OUT_CNTL); + work &= ~SAA7113_R_13_ADLSB_MASK; + if (*data->saa7113_r13_adlsb) + work |= (1 << SAA7113_R_13_ADLSB_OFFSET); + saa711x_write(sd, R_13_RT_X_PORT_OUT_CNTL, work); + } +} + /** * saa711x_detect_chip - Detects the saa711x (or clone) variant * @client: I2C client structure. @@ -1693,6 +1792,7 @@ static int saa711x_probe(struct i2c_client *client, struct saa711x_state *state; struct v4l2_subdev *sd; struct v4l2_ctrl_handler *hdl; + struct saa7115_platform_data *pdata; int ident; char name[CHIP_VER_SIZE + 1]; @@ -1756,14 +1856,20 @@ static int saa711x_probe(struct i2c_client *client, /* init to 60hz/48khz */ state->crystal_freq = SAA7115_FREQ_24_576_MHZ; + pdata = client->dev.platform_data; switch (state->ident) { case SAA7111: case SAA7111A: saa711x_writeregs(sd, saa7111_init); break; case GM7113C: + saa711x_writeregs(sd, gm7113c_init); + break; case SAA7113: - saa711x_writeregs(sd, saa7113_init); + if (pdata && pdata->saa7113_force_gm7113c_init) + saa711x_writeregs(sd, gm7113c_init); + else + saa711x_writeregs(sd, saa7113_init); break; default: state->crystal_freq = SAA7115_FREQ_32_11_MHZ; @@ -1771,6 +1877,10 @@ static int saa711x_probe(struct i2c_client *client, } if (state->ident > SAA7111A && state->ident != GM7113C) saa711x_writeregs(sd, saa7115_init_misc); + + if (pdata) + saa711x_write_platform_data(state, pdata); + saa711x_set_v4lstd(sd, V4L2_STD_NTSC); v4l2_ctrl_handler_setup(hdl); diff --git a/drivers/media/i2c/saa711x_regs.h b/drivers/media/i2c/saa711x_regs.h index 70c56d19ea06..730ca90b30ac 100644 --- a/drivers/media/i2c/saa711x_regs.h +++ b/drivers/media/i2c/saa711x_regs.h @@ -202,9 +202,24 @@ #define R_FF_S_PLL_MAX_PHASE_ERR_THRESH_NUM_LINES 0xff /* SAA7113 bit-masks */ +#define SAA7113_R_08_HTC_OFFSET 3 +#define SAA7113_R_08_HTC_MASK (0x3 << SAA7113_R_08_HTC_OFFSET) #define SAA7113_R_08_FSEL 0x40 #define SAA7113_R_08_AUFD 0x80 +#define SAA7113_R_10_VRLN_OFFSET 3 +#define SAA7113_R_10_VRLN_MASK (0x1 << SAA7113_R_10_VRLN_OFFSET) +#define SAA7113_R_10_OFTS_OFFSET 6 +#define SAA7113_R_10_OFTS_MASK (0x3 << SAA7113_R_10_OFTS_OFFSET) + +#define SAA7113_R_12_RTS0_OFFSET 0 +#define SAA7113_R_12_RTS0_MASK (0xf << SAA7113_R_12_RTS0_OFFSET) +#define SAA7113_R_12_RTS1_OFFSET 4 +#define SAA7113_R_12_RTS1_MASK (0xf << SAA7113_R_12_RTS1_OFFSET) + +#define SAA7113_R_13_ADLSB_OFFSET 7 +#define SAA7113_R_13_ADLSB_MASK (0x1 << SAA7113_R_13_ADLSB_OFFSET) + #if 0 /* Those structs will be used in the future for debug purposes */ struct saa711x_reg_descr { diff --git a/include/media/saa7115.h b/include/media/saa7115.h index 407918625c80..e8d512a7592f 100644 --- a/include/media/saa7115.h +++ b/include/media/saa7115.h @@ -64,5 +64,69 @@ #define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ #define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */ +/* ===== SAA7113 Config enums ===== */ + +/* Register 0x08 "Horizontal time constant" [Bit 3..4]: + * Should be set to "Fast Locking Mode" according to the datasheet, + * and that is the default setting in the gm7113c_init table. + * saa7113_init sets this value to "VTR Mode". */ +enum saa7113_r08_htc { + SAA7113_HTC_TV_MODE = 0x00, + SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */ + SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */ +}; + +/* Register 0x10 "Output format selection" [Bit 6..7]: + * Defaults to ITU_656 as specified in datasheet. */ +enum saa7113_r10_ofts { + SAA7113_OFTS_ITU_656 = 0x0, /* Default */ + SAA7113_OFTS_VFLAG_BY_VREF, + SAA7113_OFTS_VFLAG_BY_DATA_TYPE +}; + +/* Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: + * This is used to select what data is output on the RTS0 and RTS1 pins. + * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) + * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified + * in the datasheet, but is set to HREF_HS in the saa7113_init table. */ +enum saa7113_r12_rts { + SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ + SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ + SAA7113_RTS_GPSW, + SAA7115_RTS_HL, + SAA7113_RTS_VL, + SAA7113_RTS_DL, + SAA7113_RTS_PLIN, + SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */ + SAA7113_RTS_HS, + SAA7113_RTS_HQ, + SAA7113_RTS_ODD, + SAA7113_RTS_VS, + SAA7113_RTS_V123, + SAA7113_RTS_VGATE, + SAA7113_RTS_VREF, + SAA7113_RTS_FID +}; + +struct saa7115_platform_data { + /* saa7113 only: Force the use of the gm7113c_init table, + * instead of the old saa7113_init table. */ + bool saa7113_force_gm7113c_init; + + /* SAA7113/GM7113C Specific configurations */ + enum saa7113_r08_htc *saa7113_r08_htc; /* [R_08 - Bit 3..4] */ + + bool *saa7113_r10_vrln; /* [R_10 - Bit 3] + Disabled for gm7113c_init + Enabled for saa7113c_init */ + enum saa7113_r10_ofts *saa7113_r10_ofts; /* [R_10 - Bit 6..7] */ + + enum saa7113_r12_rts *saa7113_r12_rts0; /* [R_12 - Bit 0..3] */ + enum saa7113_r12_rts *saa7113_r12_rts1; /* [R_12 - Bit 4..7] */ + + bool *saa7113_r13_adlsb; /* [R_13 - Bit 7] + Default disabled */ +}; + #endif