From: Simon Baatz Date: Sun, 9 Jun 2013 20:14:18 +0000 (+0200) Subject: mmc: mvsdio: use standard MMC device-tree binding parser mmc_of_parse() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2cd1722496de794d336e4670d8de1e46fa84b773;p=linux-beck.git mmc: mvsdio: use standard MMC device-tree binding parser mmc_of_parse() Instead of parsing the DT binding on our own, use the standard parser mmc_of_parse(), introduced by commit 6c56e7a. Signed-off-by: Simon Baatz Tested-by: Andrew Lunn Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index d08fe6ae9bf8..4ddd83f98658 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -35,7 +35,7 @@ #define DRIVER_NAME "mvsdio" -static int maxfreq = MVSD_CLOCKRATE_MAX; +static int maxfreq; static int nodma; struct mvsd_host { @@ -685,7 +685,6 @@ static int __init mvsd_probe(struct platform_device *pdev) const struct mbus_dram_target_info *dram; struct resource *r; int ret, irq; - int gpio_card_detect, gpio_write_protect; struct pinctrl *pinctrl; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -718,6 +717,20 @@ static int __init mvsd_probe(struct platform_device *pdev) if (!IS_ERR(host->clk)) clk_prepare_enable(host->clk); + mmc->ops = &mvsd_ops; + + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; + + mmc->f_min = DIV_ROUND_UP(host->base_clock, MVSD_BASE_DIV_MAX); + mmc->f_max = MVSD_CLOCKRATE_MAX; + + mmc->max_blk_size = 2048; + mmc->max_blk_count = 65535; + + mmc->max_segs = 1; + mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + if (np) { if (IS_ERR(host->clk)) { dev_err(&pdev->dev, "DT platforms must have a clock associated\n"); @@ -726,35 +739,38 @@ static int __init mvsd_probe(struct platform_device *pdev) } host->base_clock = clk_get_rate(host->clk) / 2; - gpio_card_detect = of_get_named_gpio(np, "cd-gpios", 0); - gpio_write_protect = of_get_named_gpio(np, "wp-gpios", 0); + ret = mmc_of_parse(mmc); + if (ret < 0) + goto out; } else { const struct mvsdio_platform_data *mvsd_data; + mvsd_data = pdev->dev.platform_data; if (!mvsd_data) { ret = -ENXIO; goto out; } + mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ | + MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; host->base_clock = mvsd_data->clock / 2; - gpio_card_detect = mvsd_data->gpio_card_detect ? : -EINVAL; - gpio_write_protect = mvsd_data->gpio_write_protect ? : -EINVAL; - } - - mmc->ops = &mvsd_ops; - - mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; - - mmc->f_min = DIV_ROUND_UP(host->base_clock, MVSD_BASE_DIV_MAX); - mmc->f_max = maxfreq; + /* GPIO 0 regarded as invalid for backward compatibility */ + if (mvsd_data->gpio_card_detect && + gpio_is_valid(mvsd_data->gpio_card_detect)) { + ret = mmc_gpio_request_cd(mmc, + mvsd_data->gpio_card_detect); + if (ret) + goto out; + } else { + mmc->caps |= MMC_CAP_NEEDS_POLL; + } - mmc->max_blk_size = 2048; - mmc->max_blk_count = 65535; + if (mvsd_data->gpio_write_protect && + gpio_is_valid(mvsd_data->gpio_write_protect)) + mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect); + } - mmc->max_segs = 1; - mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count; - mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + if (maxfreq) + mmc->f_max = maxfreq; spin_lock_init(&host->lock); @@ -777,15 +793,6 @@ static int __init mvsd_probe(struct platform_device *pdev) goto out; } - if (gpio_is_valid(gpio_card_detect)) { - ret = mmc_gpio_request_cd(mmc, gpio_card_detect); - if (ret) - goto out; - } else - mmc->caps |= MMC_CAP_NEEDS_POLL; - - mmc_gpio_request_ro(mmc, gpio_write_protect); - setup_timer(&host->timer, mvsd_timeout_timer, (unsigned long)host); platform_set_drvdata(pdev, mmc); ret = mmc_add_host(mmc); @@ -793,10 +800,10 @@ static int __init mvsd_probe(struct platform_device *pdev) goto out; if (!(mmc->caps & MMC_CAP_NEEDS_POLL)) - dev_notice(&pdev->dev, "using GPIO %d for card detection\n", - gpio_card_detect); + dev_notice(&pdev->dev, "using GPIO for card detection\n"); else - dev_notice(&pdev->dev, "lacking card detect (fall back to polling)\n"); + dev_notice(&pdev->dev, + "lacking card detect (fall back to polling)\n"); return 0; out: