From: Chao Xie <chao.xie@marvell.com>
Date: Fri, 14 Jun 2013 05:21:53 +0000 (-0400)
Subject: mfd: 88pm800: Add regulator sub device
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2d3aa0569cc111b7567cb082c2f8ab32e2245e49;p=linux-beck.git

mfd: 88pm800: Add regulator sub device

Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---

diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index a475fb3c2d0c..6c954835d61e 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -157,6 +157,13 @@ static struct mfd_cell onkey_devs[] = {
 	 },
 };
 
+static struct mfd_cell regulator_devs[] = {
+	{
+	 .name = "88pm80x-regulator",
+	 .id = -1,
+	},
+};
+
 static const struct regmap_irq pm800_irqs[] = {
 	/* INT0 */
 	[PM800_IRQ_ONKEY] = {
@@ -339,6 +346,21 @@ static int device_rtc_init(struct pm80x_chip *chip,
 	return 0;
 }
 
+static int device_regulator_init(struct pm80x_chip *chip,
+					   struct pm80x_platform_data *pdata)
+{
+	int ret;
+
+	ret = mfd_add_devices(chip->dev, 0, &regulator_devs[0],
+			      ARRAY_SIZE(regulator_devs), NULL, 0, NULL);
+	if (ret) {
+		dev_err(chip->dev, "Failed to add regulator subdev\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int device_irq_init_800(struct pm80x_chip *chip)
 {
 	struct regmap *map = chip->regmap;
@@ -500,6 +522,12 @@ static int device_800_init(struct pm80x_chip *chip,
 		goto out;
 	}
 
+	ret = device_regulator_init(chip, pdata);
+	if (ret) {
+		dev_err(chip->dev, "Failed to add regulators subdev\n");
+		goto out;
+	}
+
 	return 0;
 out_dev:
 	mfd_remove_devices(chip->dev);
diff --git a/include/linux/mfd/88pm80x.h b/include/linux/mfd/88pm80x.h
index 4a66a5633031..97cb283cc8e1 100644
--- a/include/linux/mfd/88pm80x.h
+++ b/include/linux/mfd/88pm80x.h
@@ -307,6 +307,14 @@ struct pm80x_chip {
 
 struct pm80x_platform_data {
 	struct pm80x_rtc_pdata *rtc;
+	/*
+	 * For the regulator not defined, set regulators[not_defined] to be
+	 * NULL. num_regulators are the number of regulators supposed to be
+	 * initialized. If all regulators are not defined, set num_regulators
+	 * to be 0.
+	 */
+	struct regulator_init_data *regulators[PM800_ID_RG_MAX];
+	unsigned int num_regulators;
 	int irq_mode;		/* Clear interrupt by read/write(0/1) */
 	int batt_det;		/* enable/disable */
 	int (*plat_config)(struct pm80x_chip *chip,