From: Eric Miao Date: Thu, 23 Apr 2009 09:05:38 +0000 (+0800) Subject: ASoC: simplify the SSP DMA parameters settings by run-time generation X-Git-Tag: v2.6.31-rc1~363^2~29^2~94 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2d7e71fa231035d69faffbfe506ef23638385994;p=karo-tx-linux.git ASoC: simplify the SSP DMA parameters settings by run-time generation The SSP DMA parameters can actually be easily generated at run-time since they are almost similar except for the FIFO width and direction. Another benefit is the re-use of information from 'struct ssp_device', like SSDR physical FIFO address and DRCMR register index for both directions. Signed-off-by: Eric Miao Signed-off-by: Mark Brown Reviewed-by: pHilipp Zabel --- diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index b9b61ddca6ba..fb8cacca3416 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -50,139 +50,6 @@ struct ssp_priv { #endif }; -#define PXA2xx_SSP1_BASE 0x41000000 -#define PXA27x_SSP2_BASE 0x41700000 -#define PXA27x_SSP3_BASE 0x41900000 -#define PXA3xx_SSP4_BASE 0x41a00000 - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = { - .name = "SSP1 PCM Mono out", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(14), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = { - .name = "SSP1 PCM Mono in", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(13), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = { - .name = "SSP1 PCM Stereo out", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(14), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = { - .name = "SSP1 PCM Stereo in", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(13), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = { - .name = "SSP2 PCM Mono out", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(16), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = { - .name = "SSP2 PCM Mono in", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(15), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = { - .name = "SSP2 PCM Stereo out", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(16), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = { - .name = "SSP2 PCM Stereo in", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(15), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = { - .name = "SSP3 PCM Mono out", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = { - .name = "SSP3 PCM Mono in", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = { - .name = "SSP3 PCM Stereo out", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = { - .name = "SSP3 PCM Stereo in", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = { - .name = "SSP4 PCM Mono out", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = { - .name = "SSP4 PCM Mono in", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = { - .name = "SSP4 PCM Stereo out", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = { - .name = "SSP4 PCM Stereo in", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - static void dump_registers(struct ssp_device *ssp) { dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", @@ -194,25 +61,33 @@ static void dump_registers(struct ssp_device *ssp) ssp_read_reg(ssp, SSACD)); } -static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = { - { - &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in, - &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in, - }, - { - &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in, - &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in, - }, - { - &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in, - &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in, - }, - { - &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in, - &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in, - }, +struct pxa2xx_pcm_dma_data { + struct pxa2xx_pcm_dma_params params; + char name[20]; }; +static struct pxa2xx_pcm_dma_params * +ssp_get_dma_params(struct ssp_device *ssp, int stereo, int out) +{ + struct pxa2xx_pcm_dma_data *dma; + + dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL); + if (dma == NULL) + return NULL; + + snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id, + stereo ? "Stereo" : "Mono", out ? "out" : "in"); + + dma->params.name = dma->name; + dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx); + dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) : + (DCMD_INCTRGADDR | DCMD_FLOWSRC)) | + (stereo ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16; + dma->params.dev_addr = ssp->phys_base + SSDR; + + return &dma->params; +} + static int pxa_ssp_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -227,6 +102,11 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, clk_enable(priv->dev.ssp->clk); ssp_disable(&priv->dev); } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } return ret; } @@ -241,6 +121,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, ssp_disable(&priv->dev); clk_disable(priv->dev.ssp->clk); } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } } #ifdef CONFIG_PM @@ -653,25 +538,23 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; struct ssp_priv *priv = cpu_dai->private_data; struct ssp_device *ssp = priv->dev.ssp; - int dma = 0, chn = params_channels(params); + int chn = params_channels(params); u32 sscr0; u32 sspsp; int width = snd_pcm_format_physical_width(params_format(params)); int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf; - /* select correct DMA params */ - if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) - dma = 1; /* capture DMA offset is 1,3 */ + /* generate correct DMA params */ + if (cpu_dai->dma_data) + kfree(cpu_dai->dma_data); + /* Network mode with one active slot (ttsa == 1) can be used * to force 16-bit frame width on the wire (for S16_LE), even * with two channels. Use 16-bit DMA transfers for this case. */ - if (((chn == 2) && (ttsa != 1)) || (width == 32)) - dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */ - - cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma]; - - dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma); + cpu_dai->dma_data = ssp_get_dma_params(ssp, + ((chn == 2) && (ttsa != 1)) || (width == 32), + substream->stream == SNDRV_PCM_STREAM_PLAYBACK); /* we can only change the settings if the port is not in use */ if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)