From: Darren Etheridge Date: Mon, 5 Aug 2013 22:02:36 +0000 (-0500) Subject: video: da8xx-fb: set upstream clock rate (if reqd) X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2dfa77a2010fc65de131ef7f7454844df9182735;p=linux-beck.git video: da8xx-fb: set upstream clock rate (if reqd) Based on original patch by: Afzal Mohammed LCDC IP has a clock divider to adjust pixel clock, this limits pixel clock range to fck/255 - fck/2(fck - rate of input clock to LCDC IP). In the case of AM335x, where this IP is present, default fck is not sufficient to provide normal pixel clock rates, hence rendering this driver unusable on AM335x. If input clock too is configurable, allowable range of pixel clock would increase. Here initially it is checked whether with present fck, divider in IP could be configured to obtain required rate, if not, fck is adjusted. This makes it usable on AM335x. Note: Another solution would be to model an inherited basic clock divider of CCF, an advantage would be a better possible resolution for pixel clk. And trying to instantiate a CCF clock would mean that to be consistent, 3 bits being turned on to enable clocks of LCDC IP would have to be modeled as gate clocks. Now that would bring in a total of 4 clocks, including necessity to create a new inherited divider clock, and that mean a branch of clock tree would be present in LCDC driver. This would add complexity to LCDC driver bringing in considerable amount of clock handling code, and this would not bring in much advantage for existing use cases other than providing a higher resolution of pixel clock. And existing use cases work without relying on clock modeling. Another fact is that out of the two platform's using this driver DaVinci is not yet converted to CCF. In future if higher resolution of pixel clock is required, and probably after DaVinci is CCF'ed, modeling clock nodes inside driver may be considered. v2: purely cosmetic changes to try and clarify what variables are being used for in the clock rate / divider calculations Signed-off-by: Darren Etheridge Signed-off-by: Tomi Valkeinen --- diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index d8b295ab85f5..dfe757254e26 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -132,6 +132,9 @@ #define WSI_TIMEOUT 50 #define PALETTE_SIZE 256 +#define CLK_MIN_DIV 2 +#define CLK_MAX_DIV 255 + static void __iomem *da8xx_fb_reg_base; static unsigned int lcd_revision; static irq_handler_t lcdc_irq_handler; @@ -684,38 +687,76 @@ static void da8xx_fb_lcd_reset(void) } } -static inline unsigned da8xx_fb_calc_clk_divider(struct da8xx_fb_par *par, - unsigned pixclock) -{ - return par->lcd_fck_rate / (PICOS2KHZ(pixclock) * 1000); -} - -static inline unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par, - unsigned pixclock) +static int da8xx_fb_config_clk_divider(struct da8xx_fb_par *par, + unsigned lcdc_clk_div, + unsigned lcdc_clk_rate) { - unsigned div; + int ret; - div = da8xx_fb_calc_clk_divider(par, pixclock); - return KHZ2PICOS(par->lcd_fck_rate / (1000 * div)); -} + if (par->lcd_fck_rate != lcdc_clk_rate) { + ret = clk_set_rate(par->lcdc_clk, lcdc_clk_rate); + if (IS_ERR_VALUE(ret)) { + dev_err(par->dev, + "unable to set clock rate at %u\n", + lcdc_clk_rate); + return ret; + } + par->lcd_fck_rate = clk_get_rate(par->lcdc_clk); + } -static inline void da8xx_fb_config_clk_divider(unsigned div) -{ /* Configure the LCD clock divisor. */ - lcdc_write(LCD_CLK_DIVISOR(div) | + lcdc_write(LCD_CLK_DIVISOR(lcdc_clk_div) | (LCD_RASTER_MODE & 0x1), LCD_CTRL_REG); if (lcd_revision == LCD_VERSION_2) lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN | LCD_V2_CORE_CLK_EN, LCD_CLK_ENABLE_REG); + + return 0; +} + +static unsigned int da8xx_fb_calc_clk_divider(struct da8xx_fb_par *par, + unsigned pixclock, + unsigned *lcdc_clk_rate) +{ + unsigned lcdc_clk_div; + + pixclock = PICOS2KHZ(pixclock) * 1000; + + *lcdc_clk_rate = par->lcd_fck_rate; + + if (pixclock < (*lcdc_clk_rate / CLK_MAX_DIV)) { + *lcdc_clk_rate = clk_round_rate(par->lcdc_clk, + pixclock * CLK_MAX_DIV); + lcdc_clk_div = CLK_MAX_DIV; + } else if (pixclock > (*lcdc_clk_rate / CLK_MIN_DIV)) { + *lcdc_clk_rate = clk_round_rate(par->lcdc_clk, + pixclock * CLK_MIN_DIV); + lcdc_clk_div = CLK_MIN_DIV; + } else { + lcdc_clk_div = *lcdc_clk_rate / pixclock; + } + + return lcdc_clk_div; } -static inline void da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par, - struct fb_videomode *mode) +static int da8xx_fb_calc_config_clk_divider(struct da8xx_fb_par *par, + struct fb_videomode *mode) { - unsigned div = da8xx_fb_calc_clk_divider(par, mode->pixclock); + unsigned lcdc_clk_rate; + unsigned lcdc_clk_div = da8xx_fb_calc_clk_divider(par, mode->pixclock, + &lcdc_clk_rate); - da8xx_fb_config_clk_divider(div); + return da8xx_fb_config_clk_divider(par, lcdc_clk_div, lcdc_clk_rate); +} + +static inline unsigned da8xx_fb_round_clk(struct da8xx_fb_par *par, + unsigned pixclock) +{ + unsigned lcdc_clk_div, lcdc_clk_rate; + + lcdc_clk_div = da8xx_fb_calc_clk_divider(par, pixclock, &lcdc_clk_rate); + return KHZ2PICOS(lcdc_clk_rate / (1000 * lcdc_clk_div)); } static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, @@ -724,7 +765,11 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, u32 bpp; int ret = 0; - da8xx_fb_calc_config_clk_divider(par, panel); + ret = da8xx_fb_calc_config_clk_divider(par, panel); + if (IS_ERR_VALUE(ret)) { + dev_err(par->dev, "unable to configure clock\n"); + return ret; + } if (panel->sync & FB_SYNC_CLK_INVERT) lcdc_write((lcdc_read(LCD_RASTER_TIMING_2_REG) |