From: Alexandre Pereira da Silva Date: Tue, 12 Jun 2012 13:34:12 +0000 (-0300) Subject: ARM: LPC32xx: Add dt settings to the at25 node X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2e0b5a375288d624feb16b58a3af662338a63641;p=linux-beck.git ARM: LPC32xx: Add dt settings to the at25 node Add the reg, cs-gpios and max-frequencies that are needed for spi device registry in phy3250. Adds also the pl022 internal transfers details via dt Signed-off-by: Alexandre Pereira da Silva Signed-off-by: Roland Stigge --- diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index f3bf1493afb0..802ec5b2fd00 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -133,8 +133,29 @@ }; ssp0: ssp@20084000 { + #address-cells = <1>; + #size-cells = <0>; + pl022,num-chipselects = <1>; + cs-gpios = <&gpio 3 5 0>; + eeprom: at25@0 { + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; }; };