From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Apr 2009 14:04:42 +0000 (+0200) Subject: Staging: rt2860: remove dead UCOS code X-Git-Tag: v2.6.31-rc1~105^2~160 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2eb457f25f0e84d268aa83098d6def2c360add98;p=karo-tx-linux.git Staging: rt2860: remove dead UCOS code Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c index 591d1e2158da..ce2e2623fb11 100644 --- a/drivers/staging/rt2860/common/ba_action.c +++ b/drivers/staging/rt2860/common/ba_action.c @@ -1525,9 +1525,6 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet( { #ifdef LINUX NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3); -#endif -#ifdef UCOS - NdisMoveMemory(net_pkt_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3); #endif } #endif // CONFIG_STA_SUPPORT // diff --git a/drivers/staging/rt2860/common/cmm_info.c b/drivers/staging/rt2860/common/cmm_info.c index 8bafb5581fc6..091e49282607 100644 --- a/drivers/staging/rt2860/common/cmm_info.c +++ b/drivers/staging/rt2860/common/cmm_info.c @@ -1864,7 +1864,6 @@ CHAR *GetAuthMode(CHAR auth) return "UNKNOW"; } -#if 1 //#ifndef UCOS /* ========================================================================== Description: @@ -2072,7 +2071,6 @@ VOID RTMPIoctlGetMacTable( kfree(msg); } -#endif // UCOS // #ifdef DOT11_N_SUPPORT INT Set_BASetup_Proc( diff --git a/drivers/staging/rt2860/rt_ate.c b/drivers/staging/rt2860/rt_ate.c index 1ed73c9e6b60..0082f0fc2687 100644 --- a/drivers/staging/rt2860/rt_ate.c +++ b/drivers/staging/rt2860/rt_ate.c @@ -496,9 +496,7 @@ static INT ATECmdHandler( UINT i=0, atemode; PRXD_STRUC pRxD; PRTMP_TX_RING pTxRing = &pAd->TxRing[QID_AC_BE]; -#ifndef UCOS NDIS_STATUS Status = NDIS_STATUS_SUCCESS; -#endif // UCOS // #ifdef RT_BIG_ENDIAN PTXD_STRUC pDestTxD; TXD_STRUC TxD; @@ -523,13 +521,12 @@ static INT ATECmdHandler( { ATEDBGPRINT(RT_DEBUG_TRACE, ("ATE: ATESTART\n")); -#ifndef UCOS // check if we have removed the firmware if (!(ATE_ON(pAd))) { NICEraseFirmware(pAd); } -#endif // !UCOS // + atemode = pAd->ate.Mode; pAd->ate.Mode = ATE_START; // pAd->ate.TxDoneCount = pAd->ate.TxCount; @@ -658,9 +655,9 @@ static INT ATECmdHandler( // // LinkDown(pAd, FALSE); // AsicEnableBssSync(pAd); -#ifndef UCOS + netif_stop_queue(pAd->net_dev); -#endif // !UCOS // + // // If we skip "LinkDown()", we should disable protection // to prevent from sending out RTS or CTS-to-self. @@ -694,7 +691,6 @@ static INT ATECmdHandler( // Abort Tx, RX DMA. RtmpDmaEnable(pAd, 0); -#ifndef UCOS pAd->ate.bFWLoading = TRUE; Status = NICLoadFirmware(pAd); if (Status != NDIS_STATUS_SUCCESS) @@ -702,7 +698,7 @@ static INT ATECmdHandler( ATEDBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware failed, Status[=0x%08x]\n", Status)); return FALSE; } -#endif // !UCOS // + pAd->ate.Mode = ATE_STOP; @@ -777,9 +773,8 @@ static INT ATECmdHandler( #ifdef CONFIG_STA_SUPPORT RTMPStationStart(pAd); #endif // CONFIG_STA_SUPPORT // -#ifndef UCOS + netif_start_queue(pAd->net_dev); -#endif // !UCOS // } else if (!strcmp(arg, "TXCARR")) // Tx Carrier { @@ -2078,7 +2073,6 @@ INT Set_ATE_Write_RF4_Proc( TRUE if all parameters are OK, FALSE otherwise ========================================================================== */ -#ifndef UCOS INT Set_ATE_Load_E2P_Proc( IN PRTMP_ADAPTER pAd, IN PUCHAR arg) @@ -2173,44 +2167,6 @@ INT Set_ATE_Load_E2P_Proc( return ret; } -#else -INT Set_ATE_Load_E2P_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - USHORT WriteEEPROM[(EEPROM_SIZE/2)]; - struct iwreq *wrq = (struct iwreq *)arg; - - ATEDBGPRINT(RT_DEBUG_TRACE, ("===> %s (wrq->u.data.length = %d)\n\n", __func__, wrq->u.data.length)); - - if (wrq->u.data.length != EEPROM_SIZE) - { - ate_print("%s: error length (=%d) from host\n", - __func__, wrq->u.data.length); - return FALSE; - } - else/* (wrq->u.data.length == EEPROM_SIZE) */ - { - /* zero the e2p buffer */ - NdisZeroMemory((PUCHAR)WriteEEPROM, EEPROM_SIZE); - - /* fill the local buffer */ - NdisMoveMemory((PUCHAR)WriteEEPROM, wrq->u.data.pointer, wrq->u.data.length); - - do - { - /* write the content of .bin file to EEPROM */ - rt_ee_write_all(pAd, WriteEEPROM); - - } while(FALSE); - } - - ATEDBGPRINT(RT_DEBUG_TRACE, ("<=== %s\n", __func__)); - - return TRUE; - -} -#endif // !UCOS // INT Set_ATE_Read_E2P_Proc( IN PRTMP_ADAPTER pAd, @@ -3590,20 +3546,6 @@ static VOID memcpy_exl(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len); static VOID memcpy_exs(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, ULONG len); static VOID RTMP_IO_READ_BULK(PRTMP_ADAPTER pAd, UCHAR *dst, UCHAR *src, UINT32 len); -#ifdef UCOS -int ate_copy_to_user( - IN PUCHAR payload, - IN PUCHAR msg, - IN INT len) -{ - memmove(payload, msg, len); - return 0; -} - -#undef copy_to_user -#define copy_to_user(x,y,z) ate_copy_to_user((PUCHAR)x, (PUCHAR)y, z) -#endif // UCOS // - #define LEN_OF_ARG 16 VOID RtmpDoAte( @@ -3669,9 +3611,7 @@ VOID RtmpDoAte( // We will get this command either QA is closed or ated is killed by user. case RACFG_CMD_ATE_STOP: { -#ifndef UCOS INT32 ret; -#endif // !UCOS // ATEDBGPRINT(RT_DEBUG_TRACE,("RACFG_CMD_ATE_STOP\n")); @@ -3708,13 +3648,11 @@ VOID RtmpDoAte( // kill ATE daemon when leaving ATE mode. // We must kill ATE daemon first before setting ATESTOP, // or Microsoft will report sth. wrong. -#ifndef UCOS ret = KILL_THREAD_PID(pAdapter->ate.AtePid, SIGTERM, 1); if (ret) { ATEDBGPRINT(RT_DEBUG_ERROR, ("%s: unable to signal thread\n", pAdapter->net_dev->name)); } -#endif // !UCOS // } // AP might have in ATE_STOP mode due to cmd from QA. diff --git a/drivers/staging/rt2860/rt_ate.h b/drivers/staging/rt2860/rt_ate.h index 38f5c4af5462..18381c3346b1 100644 --- a/drivers/staging/rt2860/rt_ate.h +++ b/drivers/staging/rt2860/rt_ate.h @@ -28,7 +28,6 @@ #ifndef __ATE_H__ #define __ATE_H__ -#ifndef UCOS #define ate_print printk #define ATEDBGPRINT DBGPRINT #define EEPROM_SIZE 0x200 @@ -36,34 +35,6 @@ #define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin" #endif // CONFIG_STA_SUPPORT // -#else // !UCOS // -#define fATE_LOAD_EEPROM 0x0C43 -#ifdef CONFIG_PRINTK -extern INT ConsoleResponse(IN PUCHAR buff); -extern int (*remote_display)(char *); -extern void puts (const char *s); - -/* specificly defined to redirect and show ate-related messages to host. */ -/* Try to define ate_print as a macro. */ -#define ate_print(fmt, args...) \ -do{ int (*org_remote_display)(char *) = NULL; \ - org_remote_display = remote_display;\ - /* Save original "remote_display" */\ - remote_display = (int (*)(char *))ConsoleResponse; \ - printk(fmt, ## args); \ - /* Restore the remote_display function pointer */ \ - remote_display = org_remote_display; }while(0) - -#define ATEDBGPRINT(Level, Fmt) \ -{ \ - if ((Level) <= RTDebugLevel) \ - { \ - ate_print Fmt; \ - } \ -} -#endif // CONFIG_PRINTK // -#endif // !UCOS // - #define ATE_ON(_p) (((_p)->ate.Mode) != ATE_STOP) /* RT2880_iNIC will define "RT2860". */ @@ -132,12 +103,9 @@ do{ int (*org_remote_display)(char *) = NULL; \ /* RT2880_iNIC will define RT2860. */ #define EEPROM_SIZE 0x200 /* iNIC has its own EEPROM_BIN_FILE_NAME */ -#ifndef UCOS #ifdef CONFIG_STA_SUPPORT #define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin" #endif // CONFIG_STA_SUPPORT // -#endif // !UCOS // - VOID rt_ee_read_all( diff --git a/drivers/staging/rt2860/rt_config.h b/drivers/staging/rt2860/rt_config.h index a67024fb4373..570cab2d86c3 100644 --- a/drivers/staging/rt2860/rt_config.h +++ b/drivers/staging/rt2860/rt_config.h @@ -41,12 +41,6 @@ #define __RT_CONFIG_H__ #include "rtmp_type.h" -#ifdef UCOS -#include "includes.h" -#include -#include "rt_ucos.h" -#endif - #ifdef LINUX #include "rt_linux.h" #endif