From: Govindraj.R Date: Wed, 9 Nov 2011 12:11:21 +0000 (+0530) Subject: ARM: OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos X-Git-Tag: next-20111221~100^2~5^2^2^2~5^2~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=2fd149645eb;p=karo-tx-linux.git ARM: OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos Omap_uart_can_sleep function blocks system wide low power state until uart is active remove this func and add qos requests to prevent MPU from transitioning. Keep qos request to default value which will allow MPU to transition and while uart baud rate is available calculate the latency value from the baudrate and use the same to hold constraint while uart clocks are enabled, and if uart is auto-idled the constraint is updated with default constraint value allowing MPU to transition. Qos requests are blocking notifier calls so put these requests to work queue, also the driver uses irq_safe version of runtime API's and callbacks can be called in interrupt disabled context. So to avoid warn on slow path warning while using qos update API's from runtime callbacks use the qos_work_queue. During bootup the runtime_resume call backs might not be called and runtime callback gets called only after uart is idled by setting the autosuspend timeout. So qos_request from runtime resume callback might not activated during boot if uart baudrate is calculated during bootup for console uart, so schedule the qos_work queue once we calc_latency while configuring the uart port. Flush and complete any pending qos jobs in work queue while suspending. Signed-off-by: Govindraj.R Acked-by: Greg Kroah-Hartman (for drivers/tty changes) Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index e20332f4abdc..3a9d2b883b34 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -30,7 +30,6 @@ #include #include "powerdomain.h" #include "clockdomain.h" -#include #include "pm.h" #include "control.h" @@ -245,11 +244,6 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct omap3_idle_statedata *cx; int ret; - if (!omap3_can_sleep()) { - new_state_idx = drv->safe_state_index; - goto select_state; - } - /* * Prevent idle completely if CAM is active. * CAM does not have wakeup capability in OMAP3. diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 22af2f2fdbf9..b8822f8b2891 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -222,8 +222,6 @@ static int omap2_can_sleep(void) { if (omap2_fclks_active()) return 0; - if (!omap_uart_can_sleep()) - return 0; if (osc_ck->usecount > 1) return 0; if (omap_dma_running()) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 4feee45ef069..4ee5f4eb04e4 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -35,7 +35,6 @@ #include #include "clockdomain.h" #include "powerdomain.h" -#include #include #include #include @@ -456,21 +455,11 @@ void omap_sram_idle(void) clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } -int omap3_can_sleep(void) -{ - if (!omap_uart_can_sleep()) - return 0; - return 1; -} - static void omap3_pm_idle(void) { local_irq_disable(); local_fiq_disable(); - if (!omap3_can_sleep()) - goto out; - if (omap_irq_pending() || need_resched()) goto out; diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c909770eacd1..247d89478f24 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -82,28 +82,6 @@ static struct omap_uart_port_info omap_serial_default_info[] __initdata = { }; #ifdef CONFIG_PM - -int omap_uart_can_sleep(void) -{ - struct omap_uart_state *uart; - int can_sleep = 1; - - list_for_each_entry(uart, &uart_list, node) { - if (!uart->clocked) - continue; - - if (!uart->can_sleep) { - can_sleep = 0; - continue; - } - - /* This UART can now safely sleep. */ - omap_uart_allow_sleep(uart); - } - - return can_sleep; -} - static void omap_uart_enable_wakeup(struct platform_device *pdev, bool enable) { struct omap_device *od = to_omap_device(pdev); diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index ea63b2bc761c..9ff444469f3d 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -19,6 +19,7 @@ #include #include +#include #include @@ -130,6 +131,11 @@ struct uart_omap_port { u32 context_loss_cnt; u32 errata; u8 wakeups_enabled; + + struct pm_qos_request pm_qos_request; + u32 latency; + u32 calc_latency; + struct work_struct qos_work; }; #endif /* __OMAP_SERIAL_H__ */ diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index e1eaa66c047b..f3ff0ca377c5 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -51,6 +51,8 @@ static void serial_omap_rxdma_poll(unsigned long uart_no); static int serial_omap_start_rxdma(struct uart_omap_port *up); static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); +static struct workqueue_struct *serial_omap_uart_wq; + static inline unsigned int serial_in(struct uart_omap_port *up, int offset) { offset <<= up->port.regshift; @@ -671,6 +673,14 @@ serial_omap_configure_xonxoff serial_out(up, UART_LCR, up->lcr); } +static void serial_omap_uart_qos_work(struct work_struct *work) +{ + struct uart_omap_port *up = container_of(work, struct uart_omap_port, + qos_work); + + pm_qos_update_request(&up->pm_qos_request, up->latency); +} + static void serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -711,6 +721,12 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); quot = serial_omap_get_divisor(port, baud); + /* calculate wakeup latency constraint */ + up->calc_latency = (1000000 * up->port.fifosize) / + (1000 * baud / 8); + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + up->dll = quot & 0xff; up->dlh = quot >> 8; up->mdr1 = UART_OMAP_MDR1_DISABLE; @@ -1145,8 +1161,11 @@ static int serial_omap_suspend(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); - if (up) + if (up) { uart_suspend_port(&serial_omap_reg, &up->port); + flush_work_sync(&up->qos_work); + } + return 0; } @@ -1383,6 +1402,13 @@ static int serial_omap_probe(struct platform_device *pdev) up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; } + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + pm_qos_add_request(&up->pm_qos_request, + PM_QOS_CPU_DMA_LATENCY, up->latency); + serial_omap_uart_wq = create_singlethread_workqueue(up->name); + INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, omap_up_info->autosuspend_timeout); @@ -1416,6 +1442,8 @@ static int serial_omap_remove(struct platform_device *dev) if (up) { pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); + pm_qos_remove_request(&up->pm_qos_request); + kfree(up); } @@ -1518,6 +1546,9 @@ static int serial_omap_runtime_suspend(struct device *dev) (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) pdata->set_forceidle(up->pdev); + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + schedule_work(&up->qos_work); + return 0; } @@ -1538,6 +1569,9 @@ static int serial_omap_runtime_resume(struct device *dev) if (up->use_dma && pdata->set_noidle && (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) pdata->set_noidle(up->pdev); + + up->latency = up->calc_latency; + schedule_work(&up->qos_work); } return 0;