From: Paul Walmsley Date: Thu, 19 Apr 2012 06:49:09 +0000 (-0600) Subject: ARM: OMAP2+: hwmod: revise the IP block reset process X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=30e105c000abbac55602b37f4831437bca5487b0;p=linux-beck.git ARM: OMAP2+: hwmod: revise the IP block reset process Revise the IP block reset process. This patch ensures that the OCP_SYSCONFIG registers are reloaded after a custom reset. Since OCP_SYSCONFIG bits are cleared during reset, they should be reprogrammed unless the IP block is being left in reset. (The only IP blocks that are left in reset are IP blocks with hardreset lines and no custom reset function.) If the IP block is left in reset, then it is inaccessible to the MPU, and an access to the OCP_SYSCONFIG register will cause an abort. This version incorporates comments from Omar Ramirez Luna to skip the OCP_SYSCONFIG access after asserting hardreset lines. This allows the MMU (IOMMU) IP block, which has both hardreset lines and an OCP_SYSCONFIG register. Also, ignore _ocp_softreset() errors if the IP block doesn't include a softreset bit. This is needed since a subsequent patch will start taking the return value of the _reset() function seriously. Signed-off-by: Paul Walmsley Cc: Benoît Cousson Cc: Omar Ramirez Luna --- diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 4997c1a8b59d..5b07ad0251d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2,7 +2,7 @@ * omap_hwmod implementation for OMAP2/3/4 * * Copyright (C) 2009-2011 Nokia Corporation - * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011-2012 Texas Instruments, Inc. * * Paul Walmsley, Benoît Cousson, Kevin Hilman * @@ -1382,9 +1382,9 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) * @oh: struct omap_hwmod * * * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be - * enabled for this to work. Returns -EINVAL if the hwmod cannot be - * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if - * the module did not reset in time, or 0 upon success. + * enabled for this to work. Returns -ENOENT if the hwmod cannot be + * reset this way, -EINVAL if the hwmod is in the wrong state, + * -ETIMEDOUT if the module did not reset in time, or 0 upon success. * * In OMAP3 a specific SYSSTATUS register is used to get the reset status. * Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead @@ -1401,7 +1401,7 @@ static int _ocp_softreset(struct omap_hwmod *oh) if (!oh->class->sysc || !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET)) - return -EINVAL; + return -ENOENT; /* clocks must be on for this operation */ if (oh->_state != _HWMOD_STATE_ENABLED) { @@ -1462,37 +1462,60 @@ dis_opt_clks: * _reset - reset an omap_hwmod * @oh: struct omap_hwmod * * - * Resets an omap_hwmod @oh. The default software reset mechanism for - * most OMAP IP blocks is triggered via the OCP_SYSCONFIG.SOFTRESET - * bit. However, some hwmods cannot be reset via this method: some - * are not targets and therefore have no OCP header registers to - * access; others (like the IVA) have idiosyncratic reset sequences. - * So for these relatively rare cases, custom reset code can be - * supplied in the struct omap_hwmod_class .reset function pointer. - * Passes along the return value from either _reset() or the custom - * reset function - these must return -EINVAL if the hwmod cannot be - * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if - * the module did not reset in time, or 0 upon success. + * Resets an omap_hwmod @oh. If the module has a custom reset + * function pointer defined, then call it to reset the IP block, and + * pass along its return value to the caller. Otherwise, if the IP + * block has an OCP_SYSCONFIG register with a SOFTRESET bitfield + * associated with it, call a function to reset the IP block via that + * method, and pass along the return value to the caller. Finally, if + * the IP block has some hardreset lines associated with it, assert + * all of those, but do _not_ deassert them. (This is because driver + * authors have expressed an apparent requirement to control the + * deassertion of the hardreset lines themselves.) + * + * The default software reset mechanism for most OMAP IP blocks is + * triggered via the OCP_SYSCONFIG.SOFTRESET bit. However, some + * hwmods cannot be reset via this method. Some are not targets and + * therefore have no OCP header registers to access. Others (like the + * IVA) have idiosyncratic reset sequences. So for these relatively + * rare cases, custom reset code can be supplied in the struct + * omap_hwmod_class .reset function pointer. Passes along the return + * value from either _ocp_softreset() or the custom reset function - + * these must return -EINVAL if the hwmod cannot be reset this way or + * if the hwmod is in the wrong state, -ETIMEDOUT if the module did + * not reset in time, or 0 upon success. */ static int _reset(struct omap_hwmod *oh) { - int ret; + int i, r; pr_debug("omap_hwmod: %s: resetting\n", oh->name); + if (oh->class->reset) { + r = oh->class->reset(oh); + } else { + if (oh->rst_lines_cnt > 0) { + for (i = 0; i < oh->rst_lines_cnt; i++) + _assert_hardreset(oh, oh->rst_lines[i].name); + return 0; + } else { + r = _ocp_softreset(oh); + if (r == -ENOENT) + r = 0; + } + } + /* - * XXX We're not resetting modules with hardreset lines - * automatically here. Should we do this also, or just expect - * those modules to define custom reset functions? + * OCP_SYSCONFIG bits need to be reprogrammed after a + * softreset. The _enable() function should be split to avoid + * the rewrite of the OCP_SYSCONFIG register. */ - ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh); - if (oh->class->sysc) { _update_sysc_cache(oh); _enable_sysc(oh); } - return ret; + return r; } /**