From: Nishanth Menon Date: Fri, 20 Jun 2014 17:26:23 +0000 (-0500) Subject: regulator: palmas: Fix SMPS enable/disable/is_enabled X-Git-Tag: v3.16-rc3~5^2^3~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=318dbb02b;p=karo-tx-linux.git regulator: palmas: Fix SMPS enable/disable/is_enabled We use regmap regulator ops to enable/disable and check if regulator is enabled for various SMPS. However, these depend on valid enable_reg, enable_mask and enable_value in regulator descriptor. Currently we do not populate these for SMPS other than SMPS10, this results in spurious results as regmap assumes that the values are valid and ends up reading register 0x0 RTC:SECONDS_REG on Palmas variants that do have RTC! To fix this, we update proper parameters for the descriptor fields. Further, we want to ensure the behavior consistent with logic prior to commit dbabd624d4eec50b6, where, once you do a set_mode, enable/disable ensure the logic remains consistent and configures Palmas to the configuration that we set with set_mode (since the configuration register is common). To do this, we can rely on the regulator core's regulator_register behavior where the regulator descriptor pointer provided by the regulator driver is stored. (no reallocation and copy is done). This lets us update the enable_value post registration, to remain consistent with the mode we configure as part of set_mode. Fixes: dbabd624d4eec50b6 ("regulator: palmas: Reemove open coded functions with helper functions") Reported-by: Alexandre Courbot Signed-off-by: Nishanth Menon Tested-by: Alexandre Courbot Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 864ed02ce4b7..f5f522c499ba 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -323,6 +323,10 @@ static int palmas_set_mode_smps(struct regulator_dev *dev, unsigned int mode) if (rail_enable) palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg); + + /* Switch the enable value to ensure this is used for enable */ + pmic->desc[id].enable_val = pmic->current_reg_mode[id]; + return 0; } @@ -962,6 +966,14 @@ static int palmas_regulators_probe(struct platform_device *pdev) return ret; pmic->current_reg_mode[id] = reg & PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK; + + pmic->desc[id].enable_reg = + PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, + palmas_regs_info[id].ctrl_addr); + pmic->desc[id].enable_mask = + PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK; + /* set_mode overrides this value */ + pmic->desc[id].enable_val = SMPS_CTRL_MODE_ON; } pmic->desc[id].type = REGULATOR_VOLTAGE;