From: Shawn Guo Date: Tue, 15 Jan 2013 15:36:53 +0000 (+0800) Subject: mmc: sdhci-esdhc-imx: name esdhc specific definitions with ESDHC_ prefix X-Git-Tag: next-20130218~55^2~33 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=31e2934243700d633aaeeb5fcec2fafef188137f;p=karo-tx-linux.git mmc: sdhci-esdhc-imx: name esdhc specific definitions with ESDHC_ prefix Rename esdhc local definitions with ESDHC_ rather than SDHCI_ prefix, so that we can distinguish them from SDHCI core definitions from name. A couple of bit fields are also changed use shift for consistency and better readability. Signed-off-by: Shawn Guo Tested-by: Dirk Behme Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 322eabfd61c6..6ffd15e7a3b1 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -30,12 +30,12 @@ #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" -#define SDHCI_CTRL_D3CD 0x08 +#define ESDHC_CTRL_D3CD 0x08 /* VENDOR SPEC register */ -#define SDHCI_VENDOR_SPEC 0xC0 -#define SDHCI_VENDOR_SPEC_SDIO_QUIRK 0x00000002 -#define SDHCI_WTMK_LVL 0x44 -#define SDHCI_MIX_CTRL 0x48 +#define ESDHC_VENDOR_SPEC 0xc0 +#define ESDHC_VENDOR_SPEC_SDIO_QUIRK (1 << 1) +#define ESDHC_WTMK_LVL 0x44 +#define ESDHC_MIX_CTRL 0x48 /* * There is an INT DMA ERR mis-match between eSDHC and STD SDHC SPEC: @@ -43,7 +43,7 @@ * but bit28 is used as the INT DMA ERR in fsl eSDHC design. * Define this macro DMA error INT for fsl eSDHC */ -#define SDHCI_INT_VENDOR_SPEC_DMA_ERR 0x10000000 +#define ESDHC_INT_VENDOR_SPEC_DMA_ERR (1 << 28) /* * The CMDTYPE of the CMD register (offset 0xE) should be set to @@ -165,8 +165,8 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) } if (unlikely(reg == SDHCI_INT_STATUS)) { - if (val & SDHCI_INT_VENDOR_SPEC_DMA_ERR) { - val &= ~SDHCI_INT_VENDOR_SPEC_DMA_ERR; + if (val & ESDHC_INT_VENDOR_SPEC_DMA_ERR) { + val &= ~ESDHC_INT_VENDOR_SPEC_DMA_ERR; val |= SDHCI_INT_ADMA_ERROR; } } @@ -192,9 +192,9 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) * re-sample it by the following steps. */ data = readl(host->ioaddr + SDHCI_HOST_CONTROL); - data &= ~SDHCI_CTRL_D3CD; + data &= ~ESDHC_CTRL_D3CD; writel(data, host->ioaddr + SDHCI_HOST_CONTROL); - data |= SDHCI_CTRL_D3CD; + data |= ESDHC_CTRL_D3CD; writel(data, host->ioaddr + SDHCI_HOST_CONTROL); } } @@ -203,15 +203,15 @@ static void esdhc_writel_le(struct sdhci_host *host, u32 val, int reg) && (reg == SDHCI_INT_STATUS) && (val & SDHCI_INT_DATA_END))) { u32 v; - v = readl(host->ioaddr + SDHCI_VENDOR_SPEC); - v &= ~SDHCI_VENDOR_SPEC_SDIO_QUIRK; - writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); + v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + v &= ~ESDHC_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); } if (unlikely(reg == SDHCI_INT_ENABLE || reg == SDHCI_SIGNAL_ENABLE)) { if (val & SDHCI_INT_ADMA_ERROR) { val &= ~SDHCI_INT_ADMA_ERROR; - val |= SDHCI_INT_VENDOR_SPEC_DMA_ERR; + val |= ESDHC_INT_VENDOR_SPEC_DMA_ERR; } } @@ -253,9 +253,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) && (host->cmd->data->blocks > 1) && (host->cmd->data->flags & MMC_DATA_READ)) { u32 v; - v = readl(host->ioaddr + SDHCI_VENDOR_SPEC); - v |= SDHCI_VENDOR_SPEC_SDIO_QUIRK; - writel(v, host->ioaddr + SDHCI_VENDOR_SPEC); + v = readl(host->ioaddr + ESDHC_VENDOR_SPEC); + v |= ESDHC_VENDOR_SPEC_SDIO_QUIRK; + writel(v, host->ioaddr + ESDHC_VENDOR_SPEC); } imx_data->scratchpad = val; return; @@ -266,9 +266,9 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) val |= SDHCI_CMD_ABORTCMD; if (is_imx6q_usdhc(imx_data)) { - u32 m = readl(host->ioaddr + SDHCI_MIX_CTRL); + u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); m = imx_data->scratchpad | (m & 0xffff0000); - writel(m, host->ioaddr + SDHCI_MIX_CTRL); + writel(m, host->ioaddr + ESDHC_MIX_CTRL); writel(val << 16, host->ioaddr + SDHCI_TRANSFER_MODE); } else { @@ -487,7 +487,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) * to something insane. Change it back here. */ if (is_imx6q_usdhc(imx_data)) - writel(0x08100810, host->ioaddr + SDHCI_WTMK_LVL); + writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL); boarddata = &imx_data->boarddata; if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {