From: Bartlomiej Zolnierkiewicz Date: Sun, 28 Jun 2009 14:19:51 +0000 (+0200) Subject: Staging: rtl8187se: cleanup r8180_rtl8225.c X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=322f3f2fa73e42fe3163d14deabf12fd4cacc3b2;p=linux-beck.git Staging: rtl8187se: cleanup r8180_rtl8225.c * remove empty rtl8225_host_usb_init() * remove commented out code * remove useless comments * beautify code Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.c b/drivers/staging/rtl8187se/r8180_rtl8225.c index a132f6a36a62..80ea2c67d11c 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225.c @@ -16,35 +16,23 @@ #include "r8180_rtl8225.h" -u8 rtl8225_gain[]={ - 0x23,0x88,0x7c,0xa5,// -82dbm - 0x23,0x88,0x7c,0xb5,// -82dbm - 0x23,0x88,0x7c,0xc5,// -82dbm - 0x33,0x80,0x79,0xc5,// -78dbm - 0x43,0x78,0x76,0xc5,// -74dbm - 0x53,0x60,0x73,0xc5,// -70dbm - 0x63,0x58,0x70,0xc5,// -66dbm +u8 rtl8225_gain[] = { + 0x23, 0x88, 0x7c, 0xa5, /* -82dBm */ + 0x23, 0x88, 0x7c, 0xb5, /* -82dBm */ + 0x23, 0x88, 0x7c, 0xc5, /* -82dBm */ + 0x33, 0x80, 0x79, 0xc5, /* -78dBm */ + 0x43, 0x78, 0x76, 0xc5, /* -74dBm */ + 0x53, 0x60, 0x73, 0xc5, /* -70dBm */ + 0x63, 0x58, 0x70, 0xc5, /* -66dBm */ }; -u32 rtl8225_chan[] ={ - 0, - 0x0080, //ch1 - 0x0100, //ch2 - 0x0180, //ch3 - 0x0200, //ch4 - 0x0280, - 0x0300, - 0x0380, - 0x0400, - 0x0480, - 0x0500, - 0x0580, - 0x0600, - 0x0680, - 0x074A, //ch14 +u32 rtl8225_chan[] = { + 0, + 0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380, + 0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A, }; -u16 rtl8225bcd_rxgain[]={ +u16 rtl8225bcd_rxgain[] = { 0x0400, 0x0401, 0x0402, 0x0403, 0x0404, 0x0405, 0x0408, 0x0409, 0x040a, 0x040b, 0x0502, 0x0503, 0x0504, 0x0505, 0x0540, 0x0541, 0x0542, 0x0543, 0x0544, 0x0545, 0x0580, 0x0581, 0x0582, 0x0583, @@ -60,48 +48,51 @@ u16 rtl8225bcd_rxgain[]={ }; -u8 rtl8225_agc[]={ - 0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96, - 0x95,0x94,0x93,0x92,0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x89,0x88,0x87,0x86, - 0x85,0x84,0x83,0x82,0x81,0x80,0x3f,0x3e,0x3d,0x3c,0x3b,0x3a,0x39,0x38,0x37,0x36, - 0x35,0x34,0x33,0x32,0x31,0x30,0x2f,0x2e,0x2d,0x2c,0x2b,0x2a,0x29,0x28,0x27,0x26, - 0x25,0x24,0x23,0x22,0x21,0x20,0x1f,0x1e,0x1d,0x1c,0x1b,0x1a,0x19,0x18,0x17,0x16, - 0x15,0x14,0x13,0x12,0x11,0x10,0x0f,0x0e,0x0d,0x0c,0x0b,0x0a,0x09,0x08,0x07,0x06, - 0x05,0x04,0x03,0x02,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, - 0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01, +u8 rtl8225_agc[] = { + 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, 0x9e, + 0x9d, 0x9c, 0x9b, 0x9a, 0x99, 0x98, 0x97, 0x96, + 0x95, 0x94, 0x93, 0x92, 0x91, 0x90, 0x8f, 0x8e, + 0x8d, 0x8c, 0x8b, 0x8a, 0x89, 0x88, 0x87, 0x86, + 0x85, 0x84, 0x83, 0x82, 0x81, 0x80, 0x3f, 0x3e, + 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36, + 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, 0x2f, 0x2e, + 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26, + 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x1f, 0x1e, + 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18, 0x17, 0x16, + 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, + 0x0d, 0x0c, 0x0b, 0x0a, 0x09, 0x08, 0x07, 0x06, + 0x05, 0x04, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, }; - -u8 rtl8225_tx_gain_cck_ofdm[]={ - 0x02,0x06,0x0e,0x1e,0x3e,0x7e +u8 rtl8225_tx_gain_cck_ofdm[] = { + 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0x7e }; - -u8 rtl8225_tx_power_ofdm[]={ - 0x80,0x90,0xa2,0xb5,0xcb,0xe4 +u8 rtl8225_tx_power_ofdm[] = { + 0x80, 0x90, 0xa2, 0xb5, 0xcb, 0xe4 }; - -u8 rtl8225_tx_power_cck_ch14[]={ - 0x18,0x17,0x15,0x0c,0x00,0x00,0x00,0x00, - 0x1b,0x1a,0x17,0x0e,0x00,0x00,0x00,0x00, - 0x1f,0x1e,0x1a,0x0f,0x00,0x00,0x00,0x00, - 0x22,0x21,0x1d,0x11,0x00,0x00,0x00,0x00, - 0x26,0x25,0x21,0x13,0x00,0x00,0x00,0x00, - 0x2b,0x2a,0x25,0x15,0x00,0x00,0x00,0x00 +u8 rtl8225_tx_power_cck_ch14[] = { + 0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00, + 0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00, + 0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00, + 0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00, + 0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00, + 0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00 }; - -u8 rtl8225_tx_power_cck[]={ - 0x18,0x17,0x15,0x11,0x0c,0x08,0x04,0x02, - 0x1b,0x1a,0x17,0x13,0x0e,0x09,0x04,0x02, - 0x1f,0x1e,0x1a,0x15,0x10,0x0a,0x05,0x02, - 0x22,0x21,0x1d,0x18,0x11,0x0b,0x06,0x02, - 0x26,0x25,0x21,0x1b,0x14,0x0d,0x06,0x03, - 0x2b,0x2a,0x25,0x1e,0x16,0x0e,0x07,0x03 +u8 rtl8225_tx_power_cck[] = { + 0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02, + 0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02, + 0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02, + 0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02, + 0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03, + 0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03 }; - void rtl8225_set_gain(struct net_device *dev, short gain) { write_phy_ofdm(dev, 0x0d, rtl8225_gain[gain * 4]); @@ -113,15 +104,15 @@ void rtl8225_set_gain(struct net_device *dev, short gain) void write_rtl8225(struct net_device *dev, u8 adr, u16 data) { int i; - u16 out,select; + u16 out, select; u8 bit; u32 bangdata = (data << 4) | (adr & 0xf); struct r8180_priv *priv = ieee80211_priv(dev); out = read_nic_word(dev, RFPinsOutput) & 0xfff3; - write_nic_word(dev,RFPinsEnable, - (read_nic_word(dev,RFPinsEnable) | 0x7)); + write_nic_word(dev, RFPinsEnable, + (read_nic_word(dev, RFPinsEnable) | 0x7)); select = read_nic_word(dev, RFPinsSelect); @@ -131,7 +122,7 @@ void write_rtl8225(struct net_device *dev, u8 adr, u16 data) force_pci_posting(dev); udelay(10); - write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN );//| 0x1fff); + write_nic_word(dev, RFPinsOutput, out | BB_HOST_BANG_EN); force_pci_posting(dev); udelay(2); @@ -141,10 +132,8 @@ void write_rtl8225(struct net_device *dev, u8 adr, u16 data) force_pci_posting(dev); udelay(10); - - for(i=15; i>=0;i--){ - - bit = (bangdata & (1<> i; + for (i = 15; i >= 0; i--) { + bit = (bangdata & (1 << i)) >> i; write_nic_word(dev, RFPinsOutput, bit | out); @@ -152,7 +141,7 @@ void write_rtl8225(struct net_device *dev, u8 adr, u16 data) write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); i--; - bit = (bangdata & (1<> i; + bit = (bangdata & (1 << i)) >> i; write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); write_nic_word(dev, RFPinsOutput, bit | out | BB_HOST_BANG_CLK); @@ -172,7 +161,7 @@ void write_rtl8225(struct net_device *dev, u8 adr, u16 data) write_nic_word(dev, RFPinsSelect, select | ((priv->card_type == USB) ? 0 : SW_CONTROL_GPIO)); - if(priv->card_type == USB) + if (priv->card_type == USB) mdelay(2); else rtl8185_rf_pins_enable(dev); @@ -181,7 +170,6 @@ void write_rtl8225(struct net_device *dev, u8 adr, u16 data) void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) { struct r8180_priv *priv = ieee80211_priv(dev); - int GainIdx; int GainSetting; int i; @@ -193,36 +181,31 @@ void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) u8 cck_power_level = 0xff & priv->chtxpwr[ch]; u8 ofdm_power_level = 0xff & priv->chtxpwr_ofdm[ch]; - if(priv->card_type == USB){ + if (priv->card_type == USB) { max_cck_power_level = 11; - max_ofdm_power_level = 25; // 12 -> 25 + max_ofdm_power_level = 25; min_ofdm_power_level = 10; - }else{ + } else { max_cck_power_level = 35; max_ofdm_power_level = 35; min_ofdm_power_level = 0; } - /* CCK power setting */ - if(cck_power_level > max_cck_power_level) + + if (cck_power_level > max_cck_power_level) cck_power_level = max_cck_power_level; - GainIdx=cck_power_level % 6; - GainSetting=cck_power_level / 6; - if(ch == 14) + GainIdx = cck_power_level % 6; + GainSetting = cck_power_level / 6; + + if (ch == 14) cck_power_table = rtl8225_tx_power_cck_ch14; else cck_power_table = rtl8225_tx_power_cck; -// if(priv->card_8185 == 1 && priv->card_8185_Bversion ){ - /*Ver B*/ -// write_nic_byte(dev, TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[GainSetting]); -// }else{ - /*Ver C - D */ - write_nic_byte(dev, TX_GAIN_CCK, rtl8225_tx_gain_cck_ofdm[GainSetting]>>1); -// } - - for(i=0;i<8;i++){ + write_nic_byte(dev, TX_GAIN_CCK, + rtl8225_tx_gain_cck_ofdm[GainSetting] >> 1); + for (i = 0; i < 8; i++) { power = cck_power_table[GainIdx * 8 + i]; write_phy_cck(dev, 0x44 + i, power); } @@ -231,48 +214,33 @@ void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch) force_pci_posting(dev); mdelay(1); - /* OFDM power setting */ -// Old: -// if(ofdm_power_level > max_ofdm_power_level) -// ofdm_power_level = 35; -// ofdm_power_level += min_ofdm_power_level; -// Latest: - if(ofdm_power_level > (max_ofdm_power_level - min_ofdm_power_level)) + if (ofdm_power_level > (max_ofdm_power_level - min_ofdm_power_level)) ofdm_power_level = max_ofdm_power_level; else ofdm_power_level += min_ofdm_power_level; - if(ofdm_power_level > 35) + + if (ofdm_power_level > 35) ofdm_power_level = 35; -// - - GainIdx=ofdm_power_level % 6; - GainSetting=ofdm_power_level / 6; -#if 1 -// if(priv->card_type == USB){ - rtl8185_set_anaparam2(dev,RTL8225_ANAPARAM2_ON); - - write_phy_ofdm(dev,2,0x42); - write_phy_ofdm(dev,6,0); - write_phy_ofdm(dev,8,0); -// } -#endif -// if(priv->card_8185 == 1 && priv->card_8185_Bversion){ -// /*Ver B*/ -// write_nic_byte(dev, TX_GAIN_OFDM, rtl8225_tx_gain_cck_ofdm[GainSetting]); -// }else{ - /*Ver C - D */ - write_nic_byte(dev, TX_GAIN_OFDM, rtl8225_tx_gain_cck_ofdm[GainSetting]>>1); -// } + GainIdx = ofdm_power_level % 6; + GainSetting = ofdm_power_level / 6; + + rtl8185_set_anaparam2(dev, RTL8225_ANAPARAM2_ON); + + write_phy_ofdm(dev, 2, 0x42); + write_phy_ofdm(dev, 6, 0x00); + write_phy_ofdm(dev, 8, 0x00); + + write_nic_byte(dev, TX_GAIN_OFDM, + rtl8225_tx_gain_cck_ofdm[GainSetting] >> 1); power = rtl8225_tx_power_ofdm[GainIdx]; - write_phy_ofdm(dev, 0x5, power); - write_phy_ofdm(dev, 0x7, power); + write_phy_ofdm(dev, 5, power); + write_phy_ofdm(dev, 7, power); force_pci_posting(dev); mdelay(1); - //write_nic_byte(dev, TX_AGC_CONTROL,4); } void rtl8225_rf_set_chan(struct net_device *dev, short ch) @@ -289,34 +257,27 @@ void rtl8225_rf_set_chan(struct net_device *dev, short ch) force_pci_posting(dev); mdelay(10); - // A mode sifs 0x44, difs 34-14, slot 9, eifs 23, cwm 3, cwM 7, ctstoself 0x10 - if(gset){ - write_nic_byte(dev,SIFS,0x22);// SIFS: 0x22 - write_nic_byte(dev,DIFS,0x14); //DIFS: 20 - //write_nic_byte(dev,DIFS,20); //DIFS: 20 - }else{ - write_nic_byte(dev,SIFS,0x44);// SIFS: 0x22 - write_nic_byte(dev,DIFS,50 - 14); //DIFS: 36 + if (gset) { + write_nic_byte(dev, SIFS, 0x22); + write_nic_byte(dev, DIFS, 0x14); + } else { + write_nic_byte(dev, SIFS, 0x44); + write_nic_byte(dev, DIFS, 0x24); } - if(priv->ieee80211->state == IEEE80211_LINKED && - ieee80211_is_shortslot(priv->ieee80211->current_network)) - write_nic_byte(dev,SLOT,0x9); //SLOT: 9 + if (priv->ieee80211->state == IEEE80211_LINKED && + ieee80211_is_shortslot(priv->ieee80211->current_network)) + write_nic_byte(dev, SLOT, 0x9); else - write_nic_byte(dev,SLOT,0x14); //SLOT: 20 (0x14) - - - if(gset){ - write_nic_byte(dev,EIFS,81);//91 - 20); // EIFS: 91 (0x5B) - write_nic_byte(dev,CW_VAL,0x73); //CW VALUE: 0x37 - //DMESG("using G net params"); - }else{ - write_nic_byte(dev,EIFS,81); // EIFS: 91 (0x5B) - write_nic_byte(dev,CW_VAL,0xa5); //CW VALUE: 0x37 - //DMESG("using B net params"); + write_nic_byte(dev, SLOT, 0x14); + + if (gset) { + write_nic_byte(dev, EIFS, 81); + write_nic_byte(dev, CW_VAL, 0x73); + } else { + write_nic_byte(dev, EIFS, 81); + write_nic_byte(dev, CW_VAL, 0xa5); } - - } void rtl8225_host_pci_init(struct net_device *dev) @@ -325,21 +286,13 @@ void rtl8225_host_pci_init(struct net_device *dev) rtl8185_rf_pins_enable(dev); - //if(priv->card_8185 == 2 && priv->enable_gpio0 ) /* version D */ - //write_nic_word(dev, RFPinsSelect, 0x88); - //else - write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO); /* 0x488 | SW_CONTROL_GPIO */ + write_nic_word(dev, RFPinsSelect, 0x88 | SW_CONTROL_GPIO); write_nic_byte(dev, GP_ENABLE, 0); force_pci_posting(dev); mdelay(200); - write_nic_word(dev, GP_ENABLE, 0xff & (~(1<<6))); /* bit 6 is for RF on/off detection */ - - -} - -void rtl8225_host_usb_init(struct net_device *dev) -{ + /* bit 6 is for RF on/off detection */ + write_nic_word(dev, GP_ENABLE, 0xff & (~(1 << 6))); } diff --git a/drivers/staging/rtl8187se/r8180_rtl8225.h b/drivers/staging/rtl8187se/r8180_rtl8225.h index cb2773b26595..c4b87b31897f 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225.h +++ b/drivers/staging/rtl8187se/r8180_rtl8225.h @@ -24,7 +24,6 @@ void rtl8225z2_rf_set_chan(struct net_device *dev,short ch); void rtl8225z2_rf_close(struct net_device *dev); void rtl8225_host_pci_init(struct net_device *dev); -void rtl8225_host_usb_init(struct net_device *dev); void write_rtl8225(struct net_device *dev, u8 adr, u16 data); void RF_WriteReg(struct net_device *dev, u8 offset, u32 data); diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c index 8d18be80a5e6..54f2ea7ec6fc 100644 --- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c +++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c @@ -472,10 +472,7 @@ void rtl8225z2_rf_init(struct net_device *dev) // rtl8180_set_anaparam(dev, RTL8225_ANAPARAM_ON); - - if(priv->card_type == USB) - rtl8225_host_usb_init(dev); - else + if (priv->card_type != USB) rtl8225_host_pci_init(dev); write_nic_dword(dev, RF_TIMING, 0x000a8008);