From: Nick Kossifidis Date: Tue, 23 Nov 2010 19:02:20 +0000 (+0200) Subject: ath5k: Small cleanup on tweak_initvals X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=325089ab5847f5c1e43f42bb90d32f981867c4c1;p=linux-beck.git ath5k: Small cleanup on tweak_initvals * Now that we properly set rx/tx latencies for AR5311 remove that old buggy part of code left inside ath5k_hw_tweak_initval_settings that was never executed (you can't have an RF5112 radio on a mac older than AR5212). Also use a magic value for 5311 PHY_SCAL value. Signed-off-by: Nick Kossifidis Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index ca79ecd832fd..4d610617af3c 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -2058,6 +2058,7 @@ #define AR5K_PHY_SCAL 0x9878 #define AR5K_PHY_SCAL_32MHZ 0x0000000e +#define AR5K_PHY_SCAL_32MHZ_5311 0x00000008 #define AR5K_PHY_SCAL_32MHZ_2417 0x0000000a #define AR5K_PHY_SCAL_32MHZ_HB63 0x00000032 diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c index 7db984ce90fb..c9e5bad7cffc 100644 --- a/drivers/net/wireless/ath/ath5k/reset.c +++ b/drivers/net/wireless/ath/ath5k/reset.c @@ -730,24 +730,12 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah, ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL); } - if ((ah->ah_radio == AR5K_RF5112) && - (ah->ah_mac_srev < AR5K_SREV_AR5211)) { - u32 usec_reg; - /* 5311 has different tx/rx latency masks - * from 5211, since we deal 5311 the same - * as 5211 when setting initvals, shift - * values here to their proper locations */ - usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211); - ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 | - AR5K_USEC_32 | - AR5K_USEC_TX_LATENCY_5211 | - AR5K_REG_SM(29, - AR5K_USEC_RX_LATENCY_5210)), - AR5K_USEC_5211); + if (ah->ah_mac_srev < AR5K_SREV_AR5211) { /* Clear QCU/DCU clock gating register */ ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT); /* Set DAC/ADC delays */ - ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL); + ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311, + AR5K_PHY_SCAL); /* Enable PCU FIFO corruption ECO */ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211, AR5K_DIAG_SW_ECO_ENABLE);