From: Brian Campbell Date: Tue, 21 Jul 2015 14:20:28 +0000 (+0300) Subject: xhci: Calculate old endpoints correctly on device reset X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=326124a027abc9a7f43f72dc94f6f0f7a55b02b3;p=linux-beck.git xhci: Calculate old endpoints correctly on device reset When resetting a device the number of active TTs may need to be corrected by xhci_update_tt_active_eps, but the number of old active endpoints supplied to it was always zero, so the number of TTs and the bandwidth reserved for them was not updated, and could rise unnecessarily. This affected systems using Intel's Patherpoint chipset, which rely on software bandwidth checking. For example, a Lenovo X230 would lose the ability to use ports on the docking station after enough suspend/resume cycles because the bandwidth calculated would rise with every cycle when a suitable device is attached. The correct number of active endpoints is calculated in the same way as in xhci_reserve_bandwidth. Cc: Signed-off-by: Brian Campbell Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7da0d6043d33..526ebc0c7e72 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3453,6 +3453,9 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) return -EINVAL; } + if (virt_dev->tt_info) + old_active_eps = virt_dev->tt_info->active_eps; + if (virt_dev->udev != udev) { /* If the virt_dev and the udev does not match, this virt_dev * may belong to another udev.