From: Kim, Ben Young Tae Date: Sun, 15 Feb 2015 23:07:33 +0000 (+0000) Subject: Bluetooth: btusb: Add support for QCA ROME chipset family X-Git-Tag: v4.1-rc1~128^2~244^2~45 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3267c884cefa86c6d48c4d7c5571c20435271ecf;p=karo-tx-linux.git Bluetooth: btusb: Add support for QCA ROME chipset family This patch supports ROME Bluetooth family from Qualcomm Atheros, e.g. QCA61x4 or QCA6574. New chipset have similar firmware downloading sequences to previous chipset from Atheros, however, it doesn't support vid/pid switching after downloading the patch so that firmware needs to be handled by btusb module directly. ROME chipset can be differentiated from previous version by reading ROM version. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e360 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Ben Young Tae Kim Signed-off-by: Marcel Holtmann --- diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 73e1066cd38b..08330548f7fe 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -52,6 +52,7 @@ static struct usb_driver btusb_driver; #define BTUSB_SWAVE 0x1000 #define BTUSB_INTEL_NEW 0x2000 #define BTUSB_AMP 0x4000 +#define BTUSB_QCA_ROME 0x8000 static const struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ @@ -213,6 +214,10 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, + /* QCA ROME chipset */ + { USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME}, + { USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME}, + /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 }, { USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU }, @@ -2638,6 +2643,250 @@ static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev, return 0; } +#define QCA_DFU_PACKET_LEN 4096 + +#define QCA_GET_TARGET_VERSION 0x09 +#define QCA_CHECK_STATUS 0x05 +#define QCA_DFU_DOWNLOAD 0x01 + +#define QCA_SYSCFG_UPDATED 0x40 +#define QCA_PATCH_UPDATED 0x80 +#define QCA_DFU_TIMEOUT 3000 + +struct qca_version { + __le32 rom_version; + __le32 patch_version; + __le32 ram_version; + __le32 ref_clock; + __u8 reserved[4]; +} __packed; + +struct qca_rampatch_version { + __le16 rom_version; + __le16 patch_version; +} __packed; + +struct qca_device_info { + __le32 rom_version; + __u8 rampatch_hdr; /* length of header in rampatch */ + __u8 nvm_hdr; /* length of header in NVM */ + __u8 ver_offset; /* offset of version structure in rampatch */ +}; + +static const struct qca_device_info qca_devices_table[] = { + { 0x00000100, 20, 4, 10 }, /* Rome 1.0 */ + { 0x00000101, 20, 4, 10 }, /* Rome 1.1 */ + { 0x00000201, 28, 4, 18 }, /* Rome 2.1 */ + { 0x00000300, 28, 4, 18 }, /* Rome 3.0 */ + { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */ +}; + +static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request, + void *data, u16 size) +{ + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; + int pipe, err; + u8 *buf; + + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Found some of USB hosts have IOT issues with ours so that we should + * not wait until HCI layer is ready. + */ + pipe = usb_rcvctrlpipe(udev, 0); + err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, + 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err); + goto done; + } + + memcpy(data, buf, size); + +done: + kfree(buf); + + return err; +} + +static int btusb_setup_qca_download_fw(struct hci_dev *hdev, + const struct firmware *firmware, + size_t hdr_size) +{ + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; + size_t count, size, sent = 0; + int pipe, len, err; + u8 *buf; + + buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + count = firmware->size; + + size = min_t(size_t, count, hdr_size); + memcpy(buf, firmware->data, size); + + /* USB patches should go down to controller through USB path + * because binary format fits to go down through USB channel. + * USB control path is for patching headers and USB bulk is for + * patch body. + */ + pipe = usb_sndctrlpipe(udev, 0); + err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR, + 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); + if (err < 0) { + BT_ERR("%s: Failed to send headers (%d)", hdev->name, err); + goto done; + } + + sent += size; + count -= size; + + while (count) { + size = min_t(size_t, count, QCA_DFU_PACKET_LEN); + + memcpy(buf, firmware->data + sent, size); + + pipe = usb_sndbulkpipe(udev, 0x02); + err = usb_bulk_msg(udev, pipe, buf, size, &len, + QCA_DFU_TIMEOUT); + if (err < 0) { + BT_ERR("%s: Failed to send body at %zd of %zd (%d)", + hdev->name, sent, firmware->size, err); + break; + } + + if (size != len) { + BT_ERR("%s: Failed to get bulk buffer", hdev->name); + err = -EILSEQ; + break; + } + + sent += size; + count -= size; + } + +done: + kfree(buf); + return err; +} + +static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, + struct qca_version *ver, + const struct qca_device_info *info) +{ + struct qca_rampatch_version *rver; + const struct firmware *fw; + char fwname[64]; + int err; + + snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", + le32_to_cpu(ver->rom_version)); + + err = request_firmware(&fw, fwname, &hdev->dev); + if (err) { + BT_ERR("%s: failed to request rampatch file: %s (%d)", + hdev->name, fwname, err); + return err; + } + + BT_INFO("%s: using rampatch file: %s", hdev->name, fwname); + rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset); + BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x " + "build 0x%x", hdev->name, le16_to_cpu(rver->rom_version), + le16_to_cpu(rver->patch_version), le32_to_cpu(ver->rom_version), + le32_to_cpu(ver->patch_version)); + + if (rver->rom_version != ver->rom_version || + rver->patch_version <= ver->patch_version) { + BT_ERR("%s: rampatch file version did not match with firmware", + hdev->name); + err = -EINVAL; + goto done; + } + + err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr); + +done: + release_firmware(fw); + + return err; +} + +static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, + struct qca_version *ver, + const struct qca_device_info *info) +{ + const struct firmware *fw; + char fwname[64]; + int err; + + snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", + le32_to_cpu(ver->rom_version)); + + err = request_firmware(&fw, fwname, &hdev->dev); + if (err) { + BT_ERR("%s: failed to request NVM file: %s (%d)", + hdev->name, fwname, err); + return err; + } + + BT_INFO("%s: using NVM file: %s", hdev->name, fwname); + + err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr); + + release_firmware(fw); + + return err; +} + +static int btusb_setup_qca(struct hci_dev *hdev) +{ + const struct qca_device_info *info = NULL; + struct qca_version ver; + u8 status; + int i, err; + + err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, + sizeof(ver)); + if (err < 0) + return err; + + for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) { + if (ver.rom_version == qca_devices_table[i].rom_version) + info = &qca_devices_table[i]; + } + if (!info) { + BT_ERR("%s: don't support firmware rome 0x%x", hdev->name, + le32_to_cpu(ver.rom_version)); + return -ENODEV; + } + + err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status, + sizeof(status)); + if (err < 0) + return err; + + if (!(status & QCA_PATCH_UPDATED)) { + err = btusb_setup_qca_load_rampatch(hdev, &ver, info); + if (err < 0) + return err; + } + + if (!(status & QCA_SYSCFG_UPDATED)) { + err = btusb_setup_qca_load_nvm(hdev, &ver, info); + if (err < 0) + return err; + } + + return 0; +} + static int btusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -2791,6 +3040,11 @@ static int btusb_probe(struct usb_interface *intf, set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); } + if (id->driver_info & BTUSB_QCA_ROME) { + data->setup_on_usb = btusb_setup_qca; + hdev->set_bdaddr = btusb_set_bdaddr_ath3012; + } + if (id->driver_info & BTUSB_AMP) { /* AMP controllers do not support SCO packets */ data->isoc = NULL;