From: Ben Widawsky Date: Tue, 1 Apr 2014 00:16:42 +0000 (-0700) Subject: drm/i915/bdw: Extract rp_state_caps logic X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3280e8b08fd0647629530c27cd36b37982a3b597;p=linux-beck.git drm/i915/bdw: Extract rp_state_caps logic We have a need for duplicated parsing of the RP_STATE_CAPS register (and the setting of the associated fields). To reuse some code, we can extract the function into a simple helper. This patch also addresses the fact that we missed doing this for gen8, something we should have done anyway. This could be two patches, one to extract, and one to add gen8, but it's trivial enough that I think one is fine. I will accept a request to split it. Please notice the fix addressed by v2 below. Valleyview is left untouched because it is different. v2: Logically rebased on top of commit dd0a1aa19bd3d7203e58157b84cea78bbac605ac Author: Jeff McGee Date: Tue Feb 4 11:32:31 2014 -0600 drm/i915: Restore rps/rc6 on reset Note with the above change the fix for gen8 is also handled (which was not the case in Jeff's original patch). Reviewed-by: Chris Wilson Signed-off-by: Ben Widawsky Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 5aa657b35a4e..98abacd251bd 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3242,6 +3242,27 @@ static void gen6_enable_rps_interrupts(struct drm_device *dev) spin_unlock_irq(&dev_priv->irq_lock); } +static void parse_rp_state_cap(struct drm_i915_private *dev_priv, u32 rp_state_cap) +{ + /* All of these values are in units of 50MHz */ + dev_priv->rps.cur_freq = 0; + /* static values from HW: RP0 < RPe < RP1 < RPn (min_freq) */ + dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; + dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; + dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; + /* XXX: only BYT has a special efficient freq */ + dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq; + /* hw_max = RP0 until we check for overclocking */ + dev_priv->rps.max_freq = dev_priv->rps.rp0_freq; + + /* Preserve min/max settings in case of re-init */ + if (dev_priv->rps.max_freq_softlimit == 0) + dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; + + if (dev_priv->rps.min_freq_softlimit == 0) + dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; +} + static void gen8_enable_rps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -3260,6 +3281,7 @@ static void gen8_enable_rps(struct drm_device *dev) I915_WRITE(GEN6_RC_CONTROL, 0); rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + parse_rp_state_cap(dev_priv, rp_state_cap); /* 2b: Program RC6 thresholds.*/ I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16); @@ -3348,23 +3370,7 @@ static void gen6_enable_rps(struct drm_device *dev) rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); - /* All of these values are in units of 50MHz */ - dev_priv->rps.cur_freq = 0; - /* static values from HW: RP0 < RPe < RP1 < RPn (min_freq) */ - dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; - dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; - dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; - /* XXX: only BYT has a special efficient freq */ - dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq; - /* hw_max = RP0 until we check for overclocking */ - dev_priv->rps.max_freq = dev_priv->rps.rp0_freq; - - /* Preserve min/max settings in case of re-init */ - if (dev_priv->rps.max_freq_softlimit == 0) - dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq; - - if (dev_priv->rps.min_freq_softlimit == 0) - dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq; + parse_rp_state_cap(dev_priv, rp_state_cap); /* disable the counters and set deterministic thresholds */ I915_WRITE(GEN6_RC_CONTROL, 0);