From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 11 Apr 2012 09:52:47 +0000 (+0200)
Subject: brcm80211: fmac: postpone dongle RF enabling.
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3338084ab327156e593176bcf9cf7286a192cca1;p=linux-beck.git

brcm80211: fmac: postpone dongle RF enabling.

BRCMF_C_UP is the command that asks the firmware to enable RF of
dongle. Some firmware initialization steps must be performed during
RF is down. Postpone BRCMF_C_UP firing until brcmf_netdev_open get
called to ensure firmware have enough time to finish
initialization.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
index 4187435220f3..236cb9fa460c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c
@@ -799,7 +799,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 {
 	char iovbuf[BRCMF_EVENTING_MASK_LEN + 12];	/*  Room for
 				 "event_msgs" + '\0' + bitvec  */
-	uint up = 0;
 	char buf[128], *ptr;
 	u32 dongle_align = drvr->bus_if->align;
 	u32 glom = 0;
@@ -853,9 +852,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr)
 	brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf,
 				  sizeof(iovbuf));
 
-	/* Force STA UP */
-	brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_UP, (char *)&up, sizeof(up));
-
 	/* Setup event_msgs */
 	brcmf_c_mkiovar("event_msgs", drvr->eventmask, BRCMF_EVENTING_MASK_LEN,
 		      iovbuf, sizeof(iovbuf));
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 00b62708f22b..8933f9b31a9a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -799,6 +799,7 @@ static int brcmf_netdev_open(struct net_device *ndev)
 	struct brcmf_bus *bus_if = drvr->bus_if;
 	u32 toe_ol;
 	s32 ret = 0;
+	uint up = 0;
 
 	brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx);
 
@@ -822,6 +823,10 @@ static int brcmf_netdev_open(struct net_device *ndev)
 			drvr->iflist[ifp->idx]->ndev->features &=
 				~NETIF_F_IP_CSUM;
 	}
+
+	/* make sure RF is ready for work */
+	brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_UP, (char *)&up, sizeof(up));
+
 	/* Allow transmit calls */
 	netif_start_queue(ndev);
 	drvr->bus_if->drvr_up = true;