From: H Hartley Sweeten Date: Wed, 20 Jun 2012 19:02:49 +0000 (-0700) Subject: staging: comedi: usbdux: refactor init code X-Git-Tag: next-20120724~21^2~670 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3403cc0f701db8a3f1082e5b1027265ee1343b20;p=karo-tx-linux.git staging: comedi: usbdux: refactor init code Refactor the usb driver probe/disconnect and comedi driver attach/ detach to follow the style of the other comedi driver types to improve maintainability. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Frank Mori Hess Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c index 586936bc420b..848c7ec06976 100644 --- a/drivers/staging/comedi/drivers/usbdux.c +++ b/drivers/staging/comedi/drivers/usbdux.c @@ -1,6 +1,3 @@ -#define DRIVER_VERSION "v2.4" -#define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" -#define DRIVER_DESC "Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com" /* comedi/drivers/usbdux.c Copyright (C) 2003-2007 Bernd Porr, Bernd.Porr@f2s.com @@ -101,8 +98,6 @@ sampling rate. If you sample two channels you get 4kHz and so on. #include "../comedidev.h" -#define BOARDNAME "usbdux" - /* timeout for the USB-transfer in ms*/ #define BULK_TIMEOUT 1000 @@ -317,8 +312,6 @@ static struct usbduxsub usbduxsub[NUMUSBDUX]; static DEFINE_SEMAPHORE(start_stop_sem); -static struct comedi_driver usbdux_driver; /* see below for initializer */ - /* * Stops the data acquision * It should be safe to call this function from any context @@ -2299,6 +2292,231 @@ static void tidy_up(struct usbduxsub *usbduxsub_tmp) usbduxsub_tmp->pwm_cmd_running = 0; } +/* common part of attach and attach_usb */ +static int usbdux_attach_common(struct comedi_device *dev, + struct usbduxsub *udev, + void *aux_data, int aux_len) +{ + int ret; + struct comedi_subdevice *s = NULL; + int n_subdevs; + + down(&udev->sem); + /* pointer back to the corresponding comedi device */ + udev->comedidev = dev; + + /* trying to upload the firmware into the chip */ + if (aux_data) + firmwareUpload(udev, aux_data, aux_len); + + dev->board_name = "usbdux"; + + /* set number of subdevices */ + if (udev->high_speed) { + /* with pwm */ + n_subdevs = 5; + } else { + /* without pwm */ + n_subdevs = 4; + } + + ret = comedi_alloc_subdevices(dev, n_subdevs); + if (ret) { + up(&udev->sem); + return ret; + } + + /* private structure is also simply the usb-structure */ + dev->private = udev; + + /* the first subdevice is the A/D converter */ + s = dev->subdevices + SUBDEV_AD; + /* the URBs get the comedi subdevice */ + /* which is responsible for reading */ + /* this is the subdevice which reads data */ + dev->read_subdev = s; + /* the subdevice receives as private structure the */ + /* usb-structure */ + s->private = NULL; + /* analog input */ + s->type = COMEDI_SUBD_AI; + /* readable and ref is to ground */ + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; + /* 8 channels */ + s->n_chan = 8; + /* length of the channellist */ + s->len_chanlist = 8; + /* callback functions */ + s->insn_read = usbdux_ai_insn_read; + s->do_cmdtest = usbdux_ai_cmdtest; + s->do_cmd = usbdux_ai_cmd; + s->cancel = usbdux_ai_cancel; + /* max value from the A/D converter (12bit) */ + s->maxdata = 0xfff; + /* range table to convert to physical units */ + s->range_table = (&range_usbdux_ai_range); + + /* analog out */ + s = dev->subdevices + SUBDEV_DA; + /* analog out */ + s->type = COMEDI_SUBD_AO; + /* backward pointer */ + dev->write_subdev = s; + /* the subdevice receives as private structure the */ + /* usb-structure */ + s->private = NULL; + /* are writable */ + s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_CMD_WRITE; + /* 4 channels */ + s->n_chan = 4; + /* length of the channellist */ + s->len_chanlist = 4; + /* 12 bit resolution */ + s->maxdata = 0x0fff; + /* bipolar range */ + s->range_table = (&range_usbdux_ao_range); + /* callback */ + s->do_cmdtest = usbdux_ao_cmdtest; + s->do_cmd = usbdux_ao_cmd; + s->cancel = usbdux_ao_cancel; + s->insn_read = usbdux_ao_insn_read; + s->insn_write = usbdux_ao_insn_write; + + /* digital I/O */ + s = dev->subdevices + SUBDEV_DIO; + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 8; + s->maxdata = 1; + s->range_table = (&range_digital); + s->insn_bits = usbdux_dio_insn_bits; + s->insn_config = usbdux_dio_insn_config; + /* we don't use it */ + s->private = NULL; + + /* counter */ + s = dev->subdevices + SUBDEV_COUNTER; + s->type = COMEDI_SUBD_COUNTER; + s->subdev_flags = SDF_WRITABLE | SDF_READABLE; + s->n_chan = 4; + s->maxdata = 0xFFFF; + s->insn_read = usbdux_counter_read; + s->insn_write = usbdux_counter_write; + s->insn_config = usbdux_counter_config; + + if (udev->high_speed) { + /* timer / pwm */ + s = dev->subdevices + SUBDEV_PWM; + s->type = COMEDI_SUBD_PWM; + s->subdev_flags = SDF_WRITABLE | SDF_PWM_HBRIDGE; + s->n_chan = 8; + /* this defines the max duty cycle resolution */ + s->maxdata = udev->sizePwmBuf; + s->insn_write = usbdux_pwm_write; + s->insn_read = usbdux_pwm_read; + s->insn_config = usbdux_pwm_config; + usbdux_pwm_period(dev, s, PWM_DEFAULT_PERIOD); + } + /* finally decide that it's attached */ + udev->attached = 1; + + up(&udev->sem); + + dev_info(&udev->interface->dev, "comedi%d: attached to usbdux.\n", + dev->minor); + + return 0; +} + +/* is called when comedi-config is called */ +static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it) +{ + int ret; + int index; + int i; + void *aux_data; + int aux_len; + + dev->private = NULL; + + aux_data = comedi_aux_data(it->options, 0); + aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]; + if (aux_data == NULL) + aux_len = 0; + else if (aux_len == 0) + aux_data = NULL; + + down(&start_stop_sem); + /* find a valid device which has been detected by the probe function of + * the usb */ + index = -1; + for (i = 0; i < NUMUSBDUX; i++) { + if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) { + index = i; + break; + } + } + + if (index < 0) { + printk(KERN_ERR + "comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n", + dev->minor); + ret = -ENODEV; + } else + ret = usbdux_attach_common(dev, &usbduxsub[index], + aux_data, aux_len); + up(&start_stop_sem); + return ret; +} + +/* is called from comedi_usb_auto_config() */ +static int usbdux_attach_usb(struct comedi_device *dev, + struct usb_interface *uinterf) +{ + int ret; + struct usbduxsub *this_usbduxsub; + + dev->private = NULL; + + down(&start_stop_sem); + this_usbduxsub = usb_get_intfdata(uinterf); + if (!this_usbduxsub || !this_usbduxsub->probed) { + printk(KERN_ERR + "comedi%d: usbdux: error: attach_usb failed, not connected\n", + dev->minor); + ret = -ENODEV; + } else if (this_usbduxsub->attached) { + printk(KERN_ERR + "comedi%d: usbdux: error: attach_usb failed, already attached\n", + dev->minor); + ret = -ENODEV; + } else + ret = usbdux_attach_common(dev, this_usbduxsub, NULL, 0); + up(&start_stop_sem); + return ret; +} + +static void usbdux_detach(struct comedi_device *dev) +{ + struct usbduxsub *usb = dev->private; + + if (usb) { + down(&usb->sem); + dev->private = NULL; + usb->attached = 0; + usb->comedidev = NULL; + up(&usb->sem); + } +} + +static struct comedi_driver usbdux_driver = { + .driver_name = "usbdux", + .module = THIS_MODULE, + .attach = usbdux_attach, + .detach = usbdux_detach, + .attach_usb = usbdux_attach_usb, +}; + static void usbdux_firmware_request_complete_handler(const struct firmware *fw, void *context) { @@ -2328,9 +2546,8 @@ static void usbdux_firmware_request_complete_handler(const struct firmware *fw, release_firmware(fw); } -/* allocate memory for the urbs and initialise them */ -static int usbduxsub_probe(struct usb_interface *uinterf, - const struct usb_device_id *id) +static int usbdux_usb_probe(struct usb_interface *uinterf, + const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(uinterf); struct device *dev = &uinterf->dev; @@ -2591,7 +2808,7 @@ static int usbduxsub_probe(struct usb_interface *uinterf, return 0; } -static void usbduxsub_disconnect(struct usb_interface *intf) +static void usbdux_usb_disconnect(struct usb_interface *intf) { struct usbduxsub *usbduxsub_tmp = usb_get_intfdata(intf); struct usb_device *udev = interface_to_usbdev(intf); @@ -2614,249 +2831,22 @@ static void usbduxsub_disconnect(struct usb_interface *intf) dev_dbg(&intf->dev, "comedi_: disconnected from the usb\n"); } -/* common part of attach and attach_usb */ -static int usbdux_attach_common(struct comedi_device *dev, - struct usbduxsub *udev, - void *aux_data, int aux_len) -{ - int ret; - struct comedi_subdevice *s = NULL; - int n_subdevs; - - down(&udev->sem); - /* pointer back to the corresponding comedi device */ - udev->comedidev = dev; - - /* trying to upload the firmware into the chip */ - if (aux_data) - firmwareUpload(udev, aux_data, aux_len); - - dev->board_name = BOARDNAME; - - /* set number of subdevices */ - if (udev->high_speed) { - /* with pwm */ - n_subdevs = 5; - } else { - /* without pwm */ - n_subdevs = 4; - } - - ret = comedi_alloc_subdevices(dev, n_subdevs); - if (ret) { - up(&udev->sem); - return ret; - } - - /* private structure is also simply the usb-structure */ - dev->private = udev; - - /* the first subdevice is the A/D converter */ - s = dev->subdevices + SUBDEV_AD; - /* the URBs get the comedi subdevice */ - /* which is responsible for reading */ - /* this is the subdevice which reads data */ - dev->read_subdev = s; - /* the subdevice receives as private structure the */ - /* usb-structure */ - s->private = NULL; - /* analog input */ - s->type = COMEDI_SUBD_AI; - /* readable and ref is to ground */ - s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; - /* 8 channels */ - s->n_chan = 8; - /* length of the channellist */ - s->len_chanlist = 8; - /* callback functions */ - s->insn_read = usbdux_ai_insn_read; - s->do_cmdtest = usbdux_ai_cmdtest; - s->do_cmd = usbdux_ai_cmd; - s->cancel = usbdux_ai_cancel; - /* max value from the A/D converter (12bit) */ - s->maxdata = 0xfff; - /* range table to convert to physical units */ - s->range_table = (&range_usbdux_ai_range); - - /* analog out */ - s = dev->subdevices + SUBDEV_DA; - /* analog out */ - s->type = COMEDI_SUBD_AO; - /* backward pointer */ - dev->write_subdev = s; - /* the subdevice receives as private structure the */ - /* usb-structure */ - s->private = NULL; - /* are writable */ - s->subdev_flags = SDF_WRITABLE | SDF_GROUND | SDF_CMD_WRITE; - /* 4 channels */ - s->n_chan = 4; - /* length of the channellist */ - s->len_chanlist = 4; - /* 12 bit resolution */ - s->maxdata = 0x0fff; - /* bipolar range */ - s->range_table = (&range_usbdux_ao_range); - /* callback */ - s->do_cmdtest = usbdux_ao_cmdtest; - s->do_cmd = usbdux_ao_cmd; - s->cancel = usbdux_ao_cancel; - s->insn_read = usbdux_ao_insn_read; - s->insn_write = usbdux_ao_insn_write; - - /* digital I/O */ - s = dev->subdevices + SUBDEV_DIO; - s->type = COMEDI_SUBD_DIO; - s->subdev_flags = SDF_READABLE | SDF_WRITABLE; - s->n_chan = 8; - s->maxdata = 1; - s->range_table = (&range_digital); - s->insn_bits = usbdux_dio_insn_bits; - s->insn_config = usbdux_dio_insn_config; - /* we don't use it */ - s->private = NULL; - - /* counter */ - s = dev->subdevices + SUBDEV_COUNTER; - s->type = COMEDI_SUBD_COUNTER; - s->subdev_flags = SDF_WRITABLE | SDF_READABLE; - s->n_chan = 4; - s->maxdata = 0xFFFF; - s->insn_read = usbdux_counter_read; - s->insn_write = usbdux_counter_write; - s->insn_config = usbdux_counter_config; - - if (udev->high_speed) { - /* timer / pwm */ - s = dev->subdevices + SUBDEV_PWM; - s->type = COMEDI_SUBD_PWM; - s->subdev_flags = SDF_WRITABLE | SDF_PWM_HBRIDGE; - s->n_chan = 8; - /* this defines the max duty cycle resolution */ - s->maxdata = udev->sizePwmBuf; - s->insn_write = usbdux_pwm_write; - s->insn_read = usbdux_pwm_read; - s->insn_config = usbdux_pwm_config; - usbdux_pwm_period(dev, s, PWM_DEFAULT_PERIOD); - } - /* finally decide that it's attached */ - udev->attached = 1; - - up(&udev->sem); - - dev_info(&udev->interface->dev, "comedi%d: attached to usbdux.\n", - dev->minor); - - return 0; -} - -/* is called when comedi-config is called */ -static int usbdux_attach(struct comedi_device *dev, struct comedi_devconfig *it) -{ - int ret; - int index; - int i; - void *aux_data; - int aux_len; - - dev->private = NULL; - - aux_data = comedi_aux_data(it->options, 0); - aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]; - if (aux_data == NULL) - aux_len = 0; - else if (aux_len == 0) - aux_data = NULL; - - down(&start_stop_sem); - /* find a valid device which has been detected by the probe function of - * the usb */ - index = -1; - for (i = 0; i < NUMUSBDUX; i++) { - if ((usbduxsub[i].probed) && (!usbduxsub[i].attached)) { - index = i; - break; - } - } - - if (index < 0) { - printk(KERN_ERR - "comedi%d: usbdux: error: attach failed, no usbdux devs connected to the usb bus.\n", - dev->minor); - ret = -ENODEV; - } else - ret = usbdux_attach_common(dev, &usbduxsub[index], - aux_data, aux_len); - up(&start_stop_sem); - return ret; -} - -/* is called from comedi_usb_auto_config() */ -static int usbdux_attach_usb(struct comedi_device *dev, - struct usb_interface *uinterf) -{ - int ret; - struct usbduxsub *this_usbduxsub; - - dev->private = NULL; - - down(&start_stop_sem); - this_usbduxsub = usb_get_intfdata(uinterf); - if (!this_usbduxsub || !this_usbduxsub->probed) { - printk(KERN_ERR - "comedi%d: usbdux: error: attach_usb failed, not connected\n", - dev->minor); - ret = -ENODEV; - } else if (this_usbduxsub->attached) { - printk(KERN_ERR - "comedi%d: usbdux: error: attach_usb failed, already attached\n", - dev->minor); - ret = -ENODEV; - } else - ret = usbdux_attach_common(dev, this_usbduxsub, NULL, 0); - up(&start_stop_sem); - return ret; -} - -static void usbdux_detach(struct comedi_device *dev) -{ - struct usbduxsub *usb = dev->private; - - if (usb) { - down(&usb->sem); - dev->private = NULL; - usb->attached = 0; - usb->comedidev = NULL; - up(&usb->sem); - } -} - -/* main driver struct */ -static struct comedi_driver usbdux_driver = { - .driver_name = "usbdux", - .module = THIS_MODULE, - .attach = usbdux_attach, - .detach = usbdux_detach, - .attach_usb = usbdux_attach_usb, -}; - -/* Table with the USB-devices: just now only testing IDs */ -static const struct usb_device_id usbduxsub_table[] = { - {USB_DEVICE(0x13d8, 0x0001)}, - {USB_DEVICE(0x13d8, 0x0002)}, - {} /* Terminating entry */ +static const struct usb_device_id usbdux_usb_table[] = { + { USB_DEVICE(0x13d8, 0x0001) }, + { USB_DEVICE(0x13d8, 0x0002) }, + { } }; -MODULE_DEVICE_TABLE(usb, usbduxsub_table); +MODULE_DEVICE_TABLE(usb, usbdux_usb_table); static struct usb_driver usbdux_usb_driver = { - .name = BOARDNAME, - .probe = usbduxsub_probe, - .disconnect = usbduxsub_disconnect, - .id_table = usbduxsub_table, + .name = "usbdux", + .probe = usbdux_usb_probe, + .disconnect = usbdux_usb_disconnect, + .id_table = usbdux_usb_table, }; module_comedi_usb_driver(usbdux_driver, usbdux_usb_driver); -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Bernd Porr, BerndPorr@f2s.com"); +MODULE_DESCRIPTION("Stirling/ITL USB-DUX -- Bernd.Porr@f2s.com"); MODULE_LICENSE("GPL");