From: Geert Uytterhoeven Date: Sun, 12 Jan 2014 10:27:43 +0000 (+0100) Subject: spi: rspi: Add support for specifying CPHA/CPOL X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=348e5153bcf6c6a0a735eeb6f65e1aba8ffe2780;p=linux-beck.git spi: rspi: Add support for specifying CPHA/CPOL Add support for specifying the SPI clock phase and polarity, based on the SDK reference code. Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c index 4a2c7592b5eb..c3227fb44b03 100644 --- a/drivers/spi/spi-rspi.c +++ b/drivers/spi/spi-rspi.c @@ -187,6 +187,7 @@ struct rspi_data { spinlock_t lock; struct clk *clk; u8 spsr; + u16 spcmd; const struct spi_ops *ops; /* for dmaengine */ @@ -261,7 +262,7 @@ static int rspi_set_config_register(const struct rspi_data *rspi, rspi_write8(rspi, 0x00, RSPI_SPCR2); /* Sets SPCMD */ - rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP, + rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | rspi->spcmd, RSPI_SPCMD0); /* Sets RSPI mode */ @@ -302,7 +303,7 @@ static int qspi_set_config_register(const struct rspi_data *rspi, else if (access_size == 32) spcmd = SPCMD_SPB_32BIT; - spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | SPCMD_SSLKP | SPCMD_SPNDEN; + spcmd |= SPCMD_SCKDEN | SPCMD_SLNDEN | rspi->spcmd | SPCMD_SPNDEN; /* Resets transfer data length */ rspi_write32(rspi, 0, QSPI_SPBMUL0); @@ -805,6 +806,12 @@ static int rspi_setup(struct spi_device *spi) spi->bits_per_word = 8; rspi->max_speed_hz = spi->max_speed_hz; + rspi->spcmd = SPCMD_SSLKP; + if (spi->mode & SPI_CPOL) + rspi->spcmd |= SPCMD_CPOL; + if (spi->mode & SPI_CPHA) + rspi->spcmd |= SPCMD_CPHA; + set_config_register(rspi, 8); return 0; @@ -996,6 +1003,7 @@ static int rspi_probe(struct platform_device *pdev) master->setup = rspi_setup; master->transfer = rspi_transfer; master->cleanup = rspi_cleanup; + master->mode_bits = SPI_CPHA | SPI_CPOL; ret = request_irq(irq, rspi_irq, 0, dev_name(&pdev->dev), rspi); if (ret < 0) {