From: Xenia Ragiadakou Date: Wed, 22 May 2013 15:22:33 +0000 (+0300) Subject: rtl8192u: fix whitespace around 'if' in r8192U_core.c X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=34fc438a09ffdaaddeb39b6e1da0d57312f8f867;p=linux-beck.git rtl8192u: fix whitespace around 'if' in r8192U_core.c This patch fixes whitespace around 'if' following the kernel coding style conventions. Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 5048b25d4ca7..8ccd1a6fd845 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -919,7 +919,7 @@ void rtl8192_set_rxconf(struct net_device *dev) if (dev->flags & IFF_PROMISC) {DMESG ("NIC in promisc mode");} - if(priv->ieee80211->iw_mode == IW_MODE_MONITOR || \ + if (priv->ieee80211->iw_mode == IW_MODE_MONITOR || \ dev->flags & IFF_PROMISC){ rxconf = rxconf | RCR_AAP; } /*else if(priv->ieee80211->iw_mode == IW_MODE_MASTER){ @@ -931,12 +931,12 @@ void rtl8192_set_rxconf(struct net_device *dev) } - if(priv->ieee80211->iw_mode == IW_MODE_MONITOR){ + if (priv->ieee80211->iw_mode == IW_MODE_MONITOR){ rxconf = rxconf | RCR_AICV; rxconf = rxconf | RCR_APWRMGT; } - if( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) + if ( priv->crcmon == 1 && priv->ieee80211->iw_mode == IW_MODE_MONITOR) rxconf = rxconf | RCR_ACRC32; @@ -1061,7 +1061,7 @@ static void rtl8192_rx_isr(struct urb *urb) struct r8192_priv *priv = ieee80211_priv(dev); int out_pipe = info->out_pipe; int err; - if(!priv->up) + if (!priv->up) return; if (unlikely(urb->status)) { info->urb = NULL; @@ -1098,7 +1098,7 @@ static void rtl8192_rx_isr(struct urb *urb) urb->context = skb; skb_queue_tail(&priv->rx_queue, skb); err = usb_submit_urb(urb, GFP_ATOMIC); - if(err && err != EPERM) + if (err && err != EPERM) printk("can not submit rxurb, err is %x,URB status is %x\n",err,urb->status); } @@ -1188,7 +1188,7 @@ int rtl8192_hard_start_xmit(struct sk_buff *skb,struct net_device *dev) spin_lock_irqsave(&priv->tx_lock,flags); memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); - if(queue_index == TXCMD_QUEUE) { + if (queue_index == TXCMD_QUEUE) { skb_push(skb, USB_HWDESC_HEADER_LEN); rtl819xU_tx_cmd(dev, skb); ret = 1; @@ -1280,7 +1280,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate); tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur; tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc); - if(tcb_desc->bAMPDUEnable) {//AMPDU enabled + if (tcb_desc->bAMPDUEnable) {//AMPDU enabled tx_fwinfo->AllowAggregation = 1; /* DWORD 1 */ tx_fwinfo->RxMF = tcb_desc->ampdu_factor; @@ -1304,9 +1304,9 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv (tcb_desc->bRTSUseShortGI?1:0); /* Set Bandwidth and sub-channel settings. */ - if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) { - if(tcb_desc->bPacketBW) { + if (tcb_desc->bPacketBW) { tx_fwinfo->TxBandwidth = 1; tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode } else { @@ -1398,7 +1398,7 @@ u8 DrvAggr_GetAggregatibleList(struct net_device *dev, struct sk_buff *skb, do { pSendList->tx_agg_frames[pSendList->nr_drv_agg_frames++] = skb; - if(pSendList->nr_drv_agg_frames >= nMaxAggrNum) { + if (pSendList->nr_drv_agg_frames >= nMaxAggrNum) { break; } @@ -1422,8 +1422,8 @@ static void rtl8192_tx_isr(struct urb *tx_urb) memcpy(&dev,(struct net_device *)(skb->cb),sizeof(struct net_device *)); priv = ieee80211_priv(dev); - if(tcb_desc->queue_index != TXCMD_QUEUE) { - if(tx_urb->status == 0) { + if (tcb_desc->queue_index != TXCMD_QUEUE) { + if (tx_urb->status == 0) { dev->trans_start = jiffies; // Act as station mode, destination shall be unicast address. //priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom); @@ -1439,7 +1439,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb) } /* free skb and tx_urb */ - if(skb != NULL) { + if (skb != NULL) { dev_kfree_skb_any(skb); usb_free_urb(tx_urb); atomic_dec(&priv->tx_pending[queue_index]); @@ -1458,11 +1458,11 @@ static void rtl8192_tx_isr(struct urb *tx_urb) // /* Handle MPDU in wait queue. */ - if(queue_index != BEACON_QUEUE) { + if (queue_index != BEACON_QUEUE) { /* Don't send data frame during scanning.*/ - if((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0)&&\ + if ((skb_queue_len(&priv->ieee80211->skb_waitQ[queue_index]) != 0)&&\ (!(priv->ieee80211->queue_stop))) { - if(NULL != (skb = skb_dequeue(&(priv->ieee80211->skb_waitQ[queue_index])))) + if (NULL != (skb = skb_dequeue(&(priv->ieee80211->skb_waitQ[queue_index])))) priv->ieee80211->softmac_hard_start_xmit(skb, dev); return; //modified by david to avoid further processing AMSDU @@ -1480,7 +1480,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb) * 5. check whether the packet could be sent, otherwise just insert into wait head * */ skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]); - if(!check_nic_enough_desc(dev, queue_index)) { + if (!check_nic_enough_desc(dev, queue_index)) { skb_queue_head(&(priv->ieee80211->skb_drv_aggQ[queue_index]), skb); return; } @@ -1500,7 +1500,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb) struct ieee80211_drv_agg_txb SendList; memset(&SendList, 0, sizeof(struct ieee80211_drv_agg_txb)); - if(DrvAggr_GetAggregatibleList(dev, skb, &SendList) > 1) { + if (DrvAggr_GetAggregatibleList(dev, skb, &SendList) > 1) { skb = DrvAggr_Aggregation(dev, &SendList); } @@ -1523,7 +1523,7 @@ void rtl8192_beacon_stop(struct net_device *dev) msrm = msr & MSR_LINK_MASK; msr2 = msr & ~MSR_LINK_MASK; - if(NIC_8192U == priv->card_8192) { + if (NIC_8192U == priv->card_8192) { usb_kill_urb(priv->rx_urb[MAX_RX_URB]); } if ((msrm == (MSR_LINK_ADHOC<= 9) + if (tx_queue >= 9) { RT_TRACE(COMP_ERR,"%s():Unknown queue ID!!!\n",__FUNCTION__); return 0x04; @@ -1769,7 +1769,7 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb) //printk("\n %s::queue_index = %d\n",__FUNCTION__, queue_index); atomic_inc(&priv->tx_pending[queue_index]); tx_urb = usb_alloc_urb(0,GFP_ATOMIC); - if(!tx_urb){ + if (!tx_urb){ dev_kfree_skb(skb); return -ENOMEM; } @@ -1915,7 +1915,7 @@ u8 QueryIsShort(u8 TxHT, u8 TxRate, cb_desc *tcb_desc) tmp_Short = (TxHT==1)?((tcb_desc->bUseShortGI)?1:0):((tcb_desc->bUseShortPreamble)?1:0); - if(TxHT==1 && TxRate != DESC90_RATEMCS15) + if (TxHT==1 && TxRate != DESC90_RATEMCS15) tmp_Short = 0; return tmp_Short; @@ -1950,14 +1950,14 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) * without interleaves * !!! For debug purpose */ - if( pend > MAX_TX_URB){ + if ( pend > MAX_TX_URB){ printk("To discard skb packet!\n"); dev_kfree_skb_any(skb); return -1; } tx_urb = usb_alloc_urb(0,GFP_ATOMIC); - if(!tx_urb){ + if (!tx_urb){ dev_kfree_skb_any(skb); return -ENOMEM; } @@ -1969,7 +1969,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) tx_fwinfo->TxRate = MRateToHwRate8190Pci(tcb_desc->data_rate); tx_fwinfo->EnableCPUDur = tcb_desc->bTxEnableFwCalcDur; tx_fwinfo->Short = QueryIsShort(tx_fwinfo->TxHT, tx_fwinfo->TxRate, tcb_desc); - if(tcb_desc->bAMPDUEnable) {//AMPDU enabled + if (tcb_desc->bAMPDUEnable) {//AMPDU enabled tx_fwinfo->AllowAggregation = 1; /* DWORD 1 */ tx_fwinfo->RxMF = tcb_desc->ampdu_factor; @@ -1993,9 +1993,9 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) (tcb_desc->bRTSUseShortGI?1:0); /* Set Bandwidth and sub-channel settings. */ - if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) + if (priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20_40) { - if(tcb_desc->bPacketBW) { + if (tcb_desc->bPacketBW) { tx_fwinfo->TxBandwidth = 1; tx_fwinfo->TxSubCarrier = 0; //By SD3's Jerry suggestion, use duplicated mode } else { @@ -2102,7 +2102,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) //we need to send 0 byte packet whenever 512N bytes/64N(HIGN SPEED/NORMAL SPEED) bytes packet has been transmitted. Otherwise, it will be halt to wait for another packet. WB. 2008.08.27 bool bSend0Byte = false; u8 zero = 0; - if(udev->speed == USB_SPEED_HIGH) + if (udev->speed == USB_SPEED_HIGH) { if (skb->len > 0 && skb->len % 512 == 0) bSend0Byte = true; @@ -2115,7 +2115,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb) if (bSend0Byte) { tx_urb_zero = usb_alloc_urb(0,GFP_ATOMIC); - if(!tx_urb_zero){ + if (!tx_urb_zero){ RT_TRACE(COMP_ERR, "can't alloc urb for zero byte\n"); return -ENOMEM; } @@ -2201,7 +2201,7 @@ void rtl8192_usb_deleteendpoints(struct net_device *dev) int i; struct r8192_priv *priv = ieee80211_priv(dev); - if(priv->rx_urb){ + if (priv->rx_urb){ for(i=0;i<(MAX_RX_URB+1);i++){ usb_kill_urb(priv->rx_urb[i]); usb_free_urb(priv->rx_urb[i]); @@ -2224,7 +2224,7 @@ void rtl8192_usb_deleteendpoints(struct net_device *dev) #ifndef JACKSON_NEW_RX - if(priv->rx_urb){ + if (priv->rx_urb){ for(i=0;i<(MAX_RX_URB+1);i++){ usb_kill_urb(priv->rx_urb[i]); kfree(priv->rx_urb[i]->transfer_buffer); @@ -2322,7 +2322,7 @@ void rtl8192_qos_activate(struct work_struct *work) return; mutex_lock(&priv->mutex); - if(priv->ieee80211->state != IEEE80211_LINKED) + if (priv->ieee80211->state != IEEE80211_LINKED) goto success; RT_TRACE(COMP_QOS,"qos active process with associate response received\n"); /* It better set slot time at first */ @@ -2351,7 +2351,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv, int ret = 0; u32 size = sizeof(struct ieee80211_qos_parameters); - if(priv->ieee80211->state !=IEEE80211_LINKED) + if (priv->ieee80211->state !=IEEE80211_LINKED) return ret; if ((priv->ieee80211->iw_mode != IW_MODE_INFRA)) @@ -2416,14 +2416,14 @@ static int rtl8192_qos_association_resp(struct r8192_priv *priv, if ((priv == NULL) || (network == NULL)) return ret; - if(priv->ieee80211->state !=IEEE80211_LINKED) + if (priv->ieee80211->state !=IEEE80211_LINKED) return ret; if ((priv->ieee80211->iw_mode != IW_MODE_INFRA)) return ret; spin_lock_irqsave(&priv->ieee80211->lock, flags); - if(network->flags & NETWORK_HAS_QOS_PARAMETERS) { + if (network->flags & NETWORK_HAS_QOS_PARAMETERS) { memcpy(&priv->ieee80211->current_network.qos_data.parameters,\ &network->qos_data.parameters,\ sizeof(struct ieee80211_qos_parameters)); @@ -2505,9 +2505,9 @@ void rtl8192_update_ratr_table(struct net_device *dev) break; } ratr_value &= 0x0FFFFFFF; - if(ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz){ + if (ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI40MHz){ ratr_value |= 0x80000000; - }else if(!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz){ + }else if (!ieee->pHTInfo->bCurTxBW40MHz && ieee->pHTInfo->bCurShortGI20MHz){ ratr_value |= 0x80000000; } write_nic_dword(dev, RATR0+rate_index*4, ratr_value); @@ -2530,11 +2530,11 @@ bool GetNmodeSupportBySecCfg8192(struct net_device *dev) encrypt = (network->capability & WLAN_CAPABILITY_PRIVACY) || (ieee->host_encrypt && crypt && crypt->ops && (0 == strcmp(crypt->ops->name,"WEP"))); /* simply judge */ - if(encrypt && (wpa_ie_len == 0)) { + if (encrypt && (wpa_ie_len == 0)) { /* wep encryption, no N mode setting */ return false; // } else if((wpa_ie_len != 0)&&(memcmp(&(ieee->wpa_ie[14]),ccmp_ie,4))) { - } else if((wpa_ie_len != 0)) { + } else if ((wpa_ie_len != 0)) { /* parse pairwise key type */ //if((pairwisekey = WEP40)||(pairwisekey = WEP104)||(pairwisekey = TKIP)) if (((ieee->wpa_ie[0] == 0xdd) && (!memcmp(&(ieee->wpa_ie[14]),ccmp_ie,4))) || ((ieee->wpa_ie[0] == 0x30) && (!memcmp(&ieee->wpa_ie[10],ccmp_rsn_ie, 4)))) @@ -2554,7 +2554,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device *dev) struct r8192_priv *priv = ieee80211_priv(dev); struct ieee80211_device *ieee = priv->ieee80211; - if(ieee->bHalfWirelessN24GMode == true) + if (ieee->bHalfWirelessN24GMode == true) Reval = true; else Reval = false; @@ -2604,23 +2604,23 @@ void rtl8192_SetWirelessMode(struct net_device *dev, u8 wireless_mode) if ((wireless_mode == WIRELESS_MODE_AUTO) || ((wireless_mode&bSupportMode)==0)) { - if(bSupportMode & WIRELESS_MODE_N_24G) + if (bSupportMode & WIRELESS_MODE_N_24G) { wireless_mode = WIRELESS_MODE_N_24G; } - else if(bSupportMode & WIRELESS_MODE_N_5G) + else if (bSupportMode & WIRELESS_MODE_N_5G) { wireless_mode = WIRELESS_MODE_N_5G; } - else if((bSupportMode & WIRELESS_MODE_A)) + else if ((bSupportMode & WIRELESS_MODE_A)) { wireless_mode = WIRELESS_MODE_A; } - else if((bSupportMode & WIRELESS_MODE_G)) + else if ((bSupportMode & WIRELESS_MODE_G)) { wireless_mode = WIRELESS_MODE_G; } - else if((bSupportMode & WIRELESS_MODE_B)) + else if ((bSupportMode & WIRELESS_MODE_B)) { wireless_mode = WIRELESS_MODE_B; } @@ -2705,7 +2705,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev) priv->ieee80211->InitialGainHandler = InitialGain819xUsb; priv->card_type = USB; #ifdef TO_DO_LIST - if(Adapter->bInHctTest) + if (Adapter->bInHctTest) { pHalData->ShortRetryLimit = 7; pHalData->LongRetryLimit = 7; @@ -2725,7 +2725,7 @@ static void rtl8192_init_priv_variable(struct net_device *dev) (priv->LongRetryLimit<bInHctTest) + if (Adapter->bInHctTest) pHalData->ReceiveConfig = pHalData->CSMethod | RCR_AMF | RCR_ADF | //RCR_AAP | //accept management/data //guangan200710 @@ -3052,7 +3052,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) } - if(priv->rf_type == RF_1T2R) + if (priv->rf_type == RF_1T2R) { RT_TRACE(COMP_EPROM, "\n1T2R config\n"); } @@ -3073,7 +3073,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev) short rtl8192_get_channel_map(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - if(priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){ + if (priv->ChannelPlan > COUNTRY_CODE_GLOBAL_DOMAIN){ printk("rtl8180_init:Error channel plan! Set to default.\n"); priv->ChannelPlan= 0; } @@ -3118,7 +3118,7 @@ short rtl8192_init(struct net_device *dev) init_timer(&priv->watch_dog_timer); priv->watch_dog_timer.data = (unsigned long)dev; priv->watch_dog_timer.function = watch_dog_timer_callback; - if(rtl8192_usb_initendpoints(dev)!=0){ + if (rtl8192_usb_initendpoints(dev)!=0){ DMESG("Endopoints initialization failed"); return -ENOMEM; } @@ -3310,9 +3310,9 @@ bool rtl8192_adapter_start(struct net_device *dev) write_nic_byte(dev, ACK_TIMEOUT, 0x30); // RT_TRACE(COMP_INIT, "%s():priv->ResetProgress is %d\n", __FUNCTION__,priv->ResetProgress); - if(priv->ResetProgress == RESET_TYPE_NORESET) + if (priv->ResetProgress == RESET_TYPE_NORESET) rtl8192_SetWirelessMode(dev, priv->ieee80211->mode); - if(priv->ResetProgress == RESET_TYPE_NORESET){ + if (priv->ResetProgress == RESET_TYPE_NORESET){ CamResetAllEntry(dev); { u8 SECR_value = 0x0; @@ -3335,7 +3335,7 @@ bool rtl8192_adapter_start(struct net_device *dev) } #ifdef USB_RX_AGGREGATION_SUPPORT //3 For usb rx firmware aggregation control - if(priv->ResetProgress == RESET_TYPE_NORESET) + if (priv->ResetProgress == RESET_TYPE_NORESET) { u32 ulValue; PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo; @@ -3361,7 +3361,7 @@ bool rtl8192_adapter_start(struct net_device *dev) //Firmware download init_status = init_firmware(dev); - if(!init_status) + if (!init_status) { RT_TRACE(COMP_ERR,"ERR!!! %s(): Firmware download is failed\n", __FUNCTION__); return init_status; @@ -3369,9 +3369,9 @@ bool rtl8192_adapter_start(struct net_device *dev) RT_TRACE(COMP_INIT, "%s():after firmware download\n", __FUNCTION__); // #ifdef TO_DO_LIST -if(Adapter->ResetProgress == RESET_TYPE_NORESET) +if (Adapter->ResetProgress == RESET_TYPE_NORESET) { - if(pMgntInfo->RegRfOff == TRUE) + if (pMgntInfo->RegRfOff == TRUE) { // User disable RF via registry. RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n")); MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); @@ -3379,7 +3379,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } - else if(pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) + else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) { // H/W or S/W RF OFF before sleep. RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RfOffReason(%d) ----------\n", pMgntInfo->RfOffReason)); MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); @@ -3393,7 +3393,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) } else { - if(pHalData->eRFPowerState == eRfOff) + if (pHalData->eRFPowerState == eRfOff) { MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); // Those actions will be discard in MgntActSet_RF_State because of the same state @@ -3403,13 +3403,13 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) } #endif //config RF. - if(priv->ResetProgress == RESET_TYPE_NORESET){ + if (priv->ResetProgress == RESET_TYPE_NORESET){ rtl8192_phy_RFConfig(dev); RT_TRACE(COMP_INIT, "%s():after phy RF config\n", __FUNCTION__); } - if(priv->ieee80211->FwRWRF) + if (priv->ieee80211->FwRWRF) // We can force firmware to do RF-R/W priv->Rf_Mode = RF_OP_By_FW; else @@ -3421,11 +3421,11 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) rtl8192_setBBreg(dev, rFPGA0_RFMOD, bCCKEn, 0x1); rtl8192_setBBreg(dev, rFPGA0_RFMOD, bOFDMEn, 0x1); - if(priv->ResetProgress == RESET_TYPE_NORESET) + if (priv->ResetProgress == RESET_TYPE_NORESET) { //if D or C cut u8 tmpvalue = read_nic_byte(dev, 0x301); - if(tmpvalue ==0x03) + if (tmpvalue ==0x03) { priv->bDcut = TRUE; RT_TRACE(COMP_POWER_TRACKING, "D-cut\n"); @@ -3437,14 +3437,14 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) } dm_initialize_txpower_tracking(dev); - if(priv->bDcut == TRUE) + if (priv->bDcut == TRUE) { u32 i, TempCCk; u32 tmpRegA= rtl8192_QueryBBReg(dev,rOFDM0_XATxIQImbalance,bMaskDWord); // u32 tmpRegC= rtl8192_QueryBBReg(dev,rOFDM0_XCTxIQImbalance,bMaskDWord); for(i = 0; itxbbgain_table[i].txbbgain_value) + if (tmpRegA == priv->txbbgain_table[i].txbbgain_value) { priv->rfa_txpowertrackingindex= (u8)i; priv->rfa_txpowertrackingindex_real= (u8)i; @@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) for(i=0 ; icck_txbbgain_table[i].ccktxbb_valuearray[0]) + if (TempCCk == priv->cck_txbbgain_table[i].ccktxbb_valuearray[0]) { priv->cck_present_attentuation_20Mdefault=(u8) i; break; @@ -3501,7 +3501,7 @@ HalTxCheckStuck819xUsb( u16 RegTxCounter = read_nic_word(dev, 0x128); bool bStuck = FALSE; RT_TRACE(COMP_RESET,"%s():RegTxCounter is %d,TxCounter is %d\n",__FUNCTION__,RegTxCounter,priv->TxCounter); - if(priv->TxCounter==RegTxCounter) + if (priv->TxCounter==RegTxCounter) bStuck = TRUE; priv->TxCounter = RegTxCounter; @@ -3532,12 +3532,12 @@ TxCheckStuck(struct net_device *dev) // spin_lock_irqsave(&priv->ieee80211->lock,flags); for (QueueID = 0; QueueID<=BEACON_QUEUE;QueueID ++) { - if(QueueID == TXCMD_QUEUE) + if (QueueID == TXCMD_QUEUE) continue; #ifdef USB_TX_DRIVER_AGGREGATION_ENABLE - if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0)) + if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_drv_aggQ[QueueID]) == 0)) #else - if((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0)) + if ((skb_queue_len(&priv->ieee80211->skb_waitQ[QueueID]) == 0) && (skb_queue_len(&priv->ieee80211->skb_aggQ[QueueID]) == 0)) #endif continue; @@ -3546,9 +3546,9 @@ TxCheckStuck(struct net_device *dev) // PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK); // spin_unlock_irqrestore(&priv->ieee80211->lock,flags); // RT_TRACE(COMP_RESET,"bCheckFwTxCnt is %d\n",bCheckFwTxCnt); - if(bCheckFwTxCnt) + if (bCheckFwTxCnt) { - if(HalTxCheckStuck819xUsb(dev)) + if (HalTxCheckStuck819xUsb(dev)) { RT_TRACE(COMP_RESET, "TxCheckStuck(): Fw indicates no Tx condition! \n"); return RESET_TYPE_SILENT; @@ -3568,15 +3568,15 @@ HalRxCheckStuck819xUsb(struct net_device *dev) // If rssi is small, we should check rx for long time because of bad rx. // or maybe it will continuous silent reset every 2 seconds. rx_chk_cnt++; - if(priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5)) + if (priv->undecorated_smoothed_pwdb >= (RateAdaptiveTH_High+5)) { rx_chk_cnt = 0; //high rssi, check rx stuck right now. } - else if(priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) && + else if (priv->undecorated_smoothed_pwdb < (RateAdaptiveTH_High+5) && ((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_40M) || (priv->CurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdb>=RateAdaptiveTH_Low_20M)) ) { - if(rx_chk_cnt < 2) + if (rx_chk_cnt < 2) { return bStuck; } @@ -3585,11 +3585,11 @@ HalRxCheckStuck819xUsb(struct net_device *dev) rx_chk_cnt = 0; } } - else if(((priv->CurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdbCurrentChannelBW!=HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdbCurrentChannelBW==HT_CHANNEL_WIDTH_20&&priv->undecorated_smoothed_pwdbundecorated_smoothed_pwdb >= VeryLowRSSI) { - if(rx_chk_cnt < 4) + if (rx_chk_cnt < 4) { //DbgPrint("RSSI < %d && RSSI >= %d, no check this time \n", RateAdaptiveTH_Low, VeryLowRSSI); return bStuck; @@ -3602,7 +3602,7 @@ HalRxCheckStuck819xUsb(struct net_device *dev) } else { - if(rx_chk_cnt < 8) + if (rx_chk_cnt < 8) { //DbgPrint("RSSI <= %d, no check this time \n", VeryLowRSSI); return bStuck; @@ -3614,7 +3614,7 @@ HalRxCheckStuck819xUsb(struct net_device *dev) } } - if(priv->RxCounter==RegRxCounter) + if (priv->RxCounter==RegRxCounter) bStuck = TRUE; priv->RxCounter = RegRxCounter; @@ -3632,14 +3632,14 @@ RxCheckStuck(struct net_device *dev) // RT_TRACE(COMP_RESET," ==> RxCheckStuck()\n"); //PlatformAcquireSpinLock(Adapter, RT_RX_SPINLOCK); - if(priv->IrpPendingCount > 1) + if (priv->IrpPendingCount > 1) bRxCheck = TRUE; //PlatformReleaseSpinLock(Adapter, RT_RX_SPINLOCK); // RT_TRACE(COMP_RESET,"bRxCheck is %d \n",bRxCheck); - if(bRxCheck) + if (bRxCheck) { - if(HalRxCheckStuck819xUsb(dev)) + if (HalRxCheckStuck819xUsb(dev)) { RT_TRACE(COMP_RESET, "RxStuck Condition\n"); return RESET_TYPE_SILENT; @@ -3672,7 +3672,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) rfState = priv->ieee80211->eRFPowerState; TxResetType = TxCheckStuck(dev); - if( rfState != eRfOff || + if ( rfState != eRfOff || /*ADAPTER_TEST_STATUS_FLAG(Adapter, ADAPTER_STATUS_FW_DOWNLOAD_FAILURE)) &&*/ (priv->ieee80211->iw_mode != IW_MODE_ADHOC)) { @@ -3686,9 +3686,9 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) // set, STA cannot hear any packet at all. Emily, 2008.04.12 RxResetType = RxCheckStuck(dev); } - if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL) + if (TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL) return RESET_TYPE_NORMAL; - else if(TxResetType==RESET_TYPE_SILENT || RxResetType==RESET_TYPE_SILENT){ + else if (TxResetType==RESET_TYPE_SILENT || RxResetType==RESET_TYPE_SILENT){ RT_TRACE(COMP_RESET,"%s():silent reset\n",__FUNCTION__); return RESET_TYPE_SILENT; } @@ -3740,11 +3740,11 @@ CamRestoreAllEntry( struct net_device *dev) } } - else if(priv->ieee80211->pairwise_key_type == KEY_TYPE_TKIP) + else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_TKIP) { { - if(priv->ieee80211->iw_mode == IW_MODE_ADHOC) + if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) setKey(dev, 4, 0, @@ -3762,11 +3762,11 @@ CamRestoreAllEntry( struct net_device *dev) NULL); } } - else if(priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP) + else if (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP) { { - if(priv->ieee80211->iw_mode == IW_MODE_ADHOC) + if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) setKey(dev, 4, 0, @@ -3787,7 +3787,7 @@ CamRestoreAllEntry( struct net_device *dev) - if(priv->ieee80211->group_key_type == KEY_TYPE_TKIP) + if (priv->ieee80211->group_key_type == KEY_TYPE_TKIP) { MacAddr = CAM_CONST_BROAD; for(EntryId=1 ; EntryId<4 ; EntryId++) @@ -3802,7 +3802,7 @@ CamRestoreAllEntry( struct net_device *dev) NULL); } } - if(priv->ieee80211->iw_mode == IW_MODE_ADHOC) + if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) setKey(dev, 0, 0, @@ -3811,7 +3811,7 @@ CamRestoreAllEntry( struct net_device *dev) 0, NULL); } - else if(priv->ieee80211->group_key_type == KEY_TYPE_CCMP) + else if (priv->ieee80211->group_key_type == KEY_TYPE_CCMP) { MacAddr = CAM_CONST_BROAD; for(EntryId=1; EntryId<4 ; EntryId++) @@ -3827,7 +3827,7 @@ CamRestoreAllEntry( struct net_device *dev) } } - if(priv->ieee80211->iw_mode == IW_MODE_ADHOC) + if (priv->ieee80211->iw_mode == IW_MODE_ADHOC) setKey(dev, 0 , 0, @@ -3856,7 +3856,7 @@ rtl819x_ifsilentreset(struct net_device *dev) // 2007.07.20. If we need to check CCK stop, please uncomment this line. //bStuck = Adapter->HalFunc.CheckHWStopHandler(Adapter); - if(priv->ResetProgress==RESET_TYPE_NORESET) + if (priv->ResetProgress==RESET_TYPE_NORESET) { RESET_START: @@ -3866,7 +3866,7 @@ RESET_START: priv->ResetProgress = RESET_TYPE_SILENT; // rtl8192_close(dev); down(&priv->wx_sem); - if(priv->up == 0) + if (priv->up == 0) { RT_TRACE(COMP_ERR,"%s():the driver is not up! return\n",__FUNCTION__); up(&priv->wx_sem); @@ -3883,7 +3883,7 @@ RESET_START: del_timer_sync(&priv->watch_dog_timer); ieee->sync_scan_hurryup = 1; - if(ieee->state == IEEE80211_LINKED) + if (ieee->state == IEEE80211_LINKED) { down(&ieee->wx_sem); printk("ieee->state is IEEE80211_LINKED\n"); @@ -3904,9 +3904,9 @@ RESET_START: reset_status = _rtl8192_up(dev); RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__); - if(reset_status == -EAGAIN) + if (reset_status == -EAGAIN) { - if(reset_times < 3) + if (reset_times < 3) { reset_times++; goto RESET_START; @@ -3918,14 +3918,14 @@ RESET_START: } ieee->is_silent_reset = 1; EnableHWSecurityConfig8192(dev); - if(ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA) + if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_INFRA) { ieee->set_chan(ieee->dev, ieee->current_network.channel); queue_work(ieee->wq, &ieee->associate_complete_wq); } - else if(ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_ADHOC) + else if (ieee->state == IEEE80211_LINKED && ieee->iw_mode == IW_MODE_ADHOC) { ieee->set_chan(ieee->dev, ieee->current_network.channel); ieee->link_change(ieee->dev); @@ -3975,7 +3975,7 @@ void CAM_read_entry( while((i--)>=0) { ulStatus = read_nic_dword(dev, RWCAM); - if(ulStatus & BIT31){ + if (ulStatus & BIT31){ continue; } else{ @@ -4024,14 +4024,14 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) static u8 check_reset_cnt; bool bBusyTraffic = false; - if(!priv->up) + if (!priv->up) return; hal_dm_watchdog(dev); {//to get busy traffic condition - if(ieee->state == IEEE80211_LINKED) + if (ieee->state == IEEE80211_LINKED) { - if( ieee->LinkDetectInfo.NumRxOkInPeriod> 666 || + if ( ieee->LinkDetectInfo.NumRxOkInPeriod> 666 || ieee->LinkDetectInfo.NumTxOkInPeriod> 666 ) { bBusyTraffic = true; } @@ -4042,16 +4042,16 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) } //added by amy for AP roaming { - if(priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA) + if (priv->ieee80211->state == IEEE80211_LINKED && priv->ieee80211->iw_mode == IW_MODE_INFRA) { u32 TotalRxBcnNum = 0; u32 TotalRxDataNum = 0; rtl819x_update_rxcounts(priv, &TotalRxBcnNum, &TotalRxDataNum); - if((TotalRxBcnNum+TotalRxDataNum) == 0) + if ((TotalRxBcnNum+TotalRxDataNum) == 0) { #ifdef TODO - if(rfState == eRfOff) + if (rfState == eRfOff) RT_TRACE(COMP_ERR,"========>%s()\n",__FUNCTION__); #endif printk("===>%s(): AP is power off,connect another one\n",__FUNCTION__); @@ -4069,14 +4069,14 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) } // CAM_read_entry(dev,4); //check if reset the driver - if(check_reset_cnt++ >= 3) + if (check_reset_cnt++ >= 3) { ResetType = rtl819x_ifcheck_resetornot(dev); check_reset_cnt = 3; //DbgPrint("Start to check silent reset\n"); } // RT_TRACE(COMP_RESET,"%s():priv->force_reset is %d,priv->ResetProgress is %d, priv->bForcedSilentReset is %d,priv->bDisableNormalResetCheck is %d,ResetType is %d\n",__FUNCTION__,priv->force_reset,priv->ResetProgress,priv->bForcedSilentReset,priv->bDisableNormalResetCheck,ResetType); - if( (priv->force_reset) || (priv->ResetProgress==RESET_TYPE_NORESET && + if ( (priv->force_reset) || (priv->ResetProgress==RESET_TYPE_NORESET && (priv->bForcedSilentReset || (!priv->bDisableNormalResetCheck && ResetType==RESET_TYPE_SILENT)))) // This is control by OID set in Pomelo { @@ -4106,7 +4106,7 @@ int _rtl8192_up(struct net_device *dev) priv->ieee80211->ieee_up=1; RT_TRACE(COMP_INIT, "Bringing up iface"); init_status = rtl8192_adapter_start(dev); - if(!init_status) + if (!init_status) { RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__); priv->up=priv->ieee80211->ieee_up = 0; @@ -4115,11 +4115,11 @@ int _rtl8192_up(struct net_device *dev) RT_TRACE(COMP_INIT, "start adapter finished\n"); rtl8192_rx_enable(dev); // rtl8192_tx_enable(dev); - if(priv->ieee80211->state != IEEE80211_LINKED) + if (priv->ieee80211->state != IEEE80211_LINKED) ieee80211_softmac_start_protocol(priv->ieee80211); ieee80211_reset_queue(priv->ieee80211); watch_dog_timer_callback((unsigned long) dev); - if(!netif_queue_stopped(dev)) + if (!netif_queue_stopped(dev)) netif_start_queue(dev); else netif_wake_queue(dev); @@ -4378,7 +4378,7 @@ int rtl8192_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) //john's test 0711 printk("@@ wrq->u pointer = "); for(i=0;iu.data.length;i++){ - if(i%10==0) printk("\n"); + if (i%10==0) printk("\n"); printk( "%8x|", ((u32 *)wrq->u.data.pointer)[i] ); } printk("\n"); @@ -4401,7 +4401,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate) { u8 ret_rate = 0xff; - if(!bIsHT) { + if (!bIsHT) { switch (rate) { case DESC90_RATE1M: ret_rate = MGN_1M; break; case DESC90_RATE2M: ret_rate = MGN_2M; break; @@ -4471,7 +4471,7 @@ void UpdateRxPktTimeStamp8190 (struct net_device *dev, struct ieee80211_rx_stats { struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev); - if(stats->bIsAMPDU && !stats->bFirstMPDU) { + if (stats->bIsAMPDU && !stats->bFirstMPDU) { stats->mac_time[0] = priv->LastRxDescTSFLow; stats->mac_time[1] = priv->LastRxDescTSFHigh; } else { @@ -4523,13 +4523,13 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 // // Check whether we should take the previous packet into accounting // - if(!pprevious_stats->bIsAMPDU) + if (!pprevious_stats->bIsAMPDU) { // if previous packet is not aggregated packet bcheck = true; } - if(slide_rssi_statistics++ >= PHY_RSSI_SLID_WIN_MAX) + if (slide_rssi_statistics++ >= PHY_RSSI_SLID_WIN_MAX) { slide_rssi_statistics = PHY_RSSI_SLID_WIN_MAX; last_rssi = priv->stats.slide_signal_strength[slide_rssi_index]; @@ -4538,7 +4538,7 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 priv->stats.slide_rssi_total += pprevious_stats->SignalStrength; priv->stats.slide_signal_strength[slide_rssi_index++] = pprevious_stats->SignalStrength; - if(slide_rssi_index >= PHY_RSSI_SLID_WIN_MAX) + if (slide_rssi_index >= PHY_RSSI_SLID_WIN_MAX) slide_rssi_index = 0; // <1> Showed on UI for user, in dbm @@ -4548,13 +4548,13 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 // // If the previous packet does not match the criteria, neglect it // - if(!pprevious_stats->bPacketMatchBSSID) + if (!pprevious_stats->bPacketMatchBSSID) { - if(!pprevious_stats->bToSelfBA) + if (!pprevious_stats->bToSelfBA) return; } - if(!bcheck) + if (!bcheck) return; @@ -4570,7 +4570,7 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 // <2> Showed on UI for engineering // hardware does not provide rssi information for each rf path in CCK - if(!pprevious_stats->bIsCCK && (pprevious_stats->bPacketToSelf || pprevious_stats->bToSelfBA)) + if (!pprevious_stats->bIsCCK && (pprevious_stats->bPacketToSelf || pprevious_stats->bToSelfBA)) { for (rfpath = RF90_PATH_A; rfpath < priv->NumTotalRFPath; rfpath++) { @@ -4578,12 +4578,12 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 continue; //Fixed by Jacken 2008-03-20 - if(priv->stats.rx_rssi_percentage[rfpath] == 0) + if (priv->stats.rx_rssi_percentage[rfpath] == 0) { priv->stats.rx_rssi_percentage[rfpath] = pprevious_stats->RxMIMOSignalStrength[rfpath]; //DbgPrint("MIMO RSSI initialize \n"); } - if(pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath]) + if (pprevious_stats->RxMIMOSignalStrength[rfpath] > priv->stats.rx_rssi_percentage[rfpath]) { priv->stats.rx_rssi_percentage[rfpath] = ( (priv->stats.rx_rssi_percentage[rfpath]*(Rx_Smooth_Factor-1)) + @@ -4608,10 +4608,10 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 pprevious_stats->bIsCCK? "CCK": "OFDM", pprevious_stats->RxPWDBAll); - if(pprevious_stats->bPacketBeacon) + if (pprevious_stats->bPacketBeacon) { /* record the beacon pwdb to the sliding window. */ - if(slide_beacon_adc_pwdb_statistics++ >= PHY_Beacon_RSSI_SLID_WIN_MAX) + if (slide_beacon_adc_pwdb_statistics++ >= PHY_Beacon_RSSI_SLID_WIN_MAX) { slide_beacon_adc_pwdb_statistics = PHY_Beacon_RSSI_SLID_WIN_MAX; last_beacon_adc_pwdb = priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index]; @@ -4623,10 +4623,10 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 priv->stats.Slide_Beacon_pwdb[slide_beacon_adc_pwdb_index] = pprevious_stats->RxPWDBAll; //DbgPrint("slide_beacon_adc_pwdb_index = %d, pPreviousRfd->Status.RxPWDBAll = %d\n", slide_beacon_adc_pwdb_index, pPreviousRfd->Status.RxPWDBAll); slide_beacon_adc_pwdb_index++; - if(slide_beacon_adc_pwdb_index >= PHY_Beacon_RSSI_SLID_WIN_MAX) + if (slide_beacon_adc_pwdb_index >= PHY_Beacon_RSSI_SLID_WIN_MAX) slide_beacon_adc_pwdb_index = 0; pprevious_stats->RxPWDBAll = priv->stats.Slide_Beacon_Total/slide_beacon_adc_pwdb_statistics; - if(pprevious_stats->RxPWDBAll >= 3) + if (pprevious_stats->RxPWDBAll >= 3) pprevious_stats->RxPWDBAll -= 3; } @@ -4635,14 +4635,14 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 pprevious_stats->RxPWDBAll); - if(pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) + if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) { - if(priv->undecorated_smoothed_pwdb < 0) // initialize + if (priv->undecorated_smoothed_pwdb < 0) // initialize { priv->undecorated_smoothed_pwdb = pprevious_stats->RxPWDBAll; //DbgPrint("First pwdb initialize \n"); } - if(pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb) + if (pprevious_stats->RxPWDBAll > (u32)priv->undecorated_smoothed_pwdb) { priv->undecorated_smoothed_pwdb = ( ((priv->undecorated_smoothed_pwdb)*(Rx_Smooth_Factor-1)) + @@ -4662,13 +4662,13 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 // Check EVM // /* record the general EVM to the sliding window. */ - if(pprevious_stats->SignalQuality == 0) + if (pprevious_stats->SignalQuality == 0) { } else { - if(pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA){ - if(slide_evm_statistics++ >= PHY_RSSI_SLID_WIN_MAX){ + if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA){ + if (slide_evm_statistics++ >= PHY_RSSI_SLID_WIN_MAX){ slide_evm_statistics = PHY_RSSI_SLID_WIN_MAX; last_evm = priv->stats.slide_evm[slide_evm_index]; priv->stats.slide_evm_total -= last_evm; @@ -4677,7 +4677,7 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 priv->stats.slide_evm_total += pprevious_stats->SignalQuality; priv->stats.slide_evm[slide_evm_index++] = pprevious_stats->SignalQuality; - if(slide_evm_index >= PHY_RSSI_SLID_WIN_MAX) + if (slide_evm_index >= PHY_RSSI_SLID_WIN_MAX) slide_evm_index = 0; // <1> Showed on UI for user, in percentage. @@ -4688,13 +4688,13 @@ void rtl8192_process_phyinfo(struct r8192_priv *priv,u8 *buffer, struct ieee8021 } // <2> Showed on UI for engineering - if(pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) + if (pprevious_stats->bPacketToSelf || pprevious_stats->bPacketBeacon || pprevious_stats->bToSelfBA) { for(nspatial_stream = 0; nspatial_stream<2 ; nspatial_stream++) // 2 spatial stream { - if(pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) + if (pprevious_stats->RxMIMOSignalQuality[nspatial_stream] != -1) { - if(priv->stats.rx_evm_percentage[nspatial_stream] == 0) // initialize + if (priv->stats.rx_evm_percentage[nspatial_stream] == 0) // initialize { priv->stats.rx_evm_percentage[nspatial_stream] = pprevious_stats->RxMIMOSignalQuality[nspatial_stream]; } @@ -4753,13 +4753,13 @@ rtl819x_evm_dbtopercentage( ret_val = value; - if(ret_val >= 0) + if (ret_val >= 0) ret_val = 0; - if(ret_val <= -33) + if (ret_val <= -33) ret_val = -33; ret_val = 0 - ret_val; ret_val*=3; - if(ret_val == 99) + if (ret_val == 99) ret_val = 100; return(ret_val); } @@ -4776,39 +4776,39 @@ rtl819x_signal_scale_mapping( long retsig; // Step 1. Scale mapping. - if(currsig >= 61 && currsig <= 100) + if (currsig >= 61 && currsig <= 100) { retsig = 90 + ((currsig - 60) / 4); } - else if(currsig >= 41 && currsig <= 60) + else if (currsig >= 41 && currsig <= 60) { retsig = 78 + ((currsig - 40) / 2); } - else if(currsig >= 31 && currsig <= 40) + else if (currsig >= 31 && currsig <= 40) { retsig = 66 + (currsig - 30); } - else if(currsig >= 21 && currsig <= 30) + else if (currsig >= 21 && currsig <= 30) { retsig = 54 + (currsig - 20); } - else if(currsig >= 5 && currsig <= 20) + else if (currsig >= 5 && currsig <= 20) { retsig = 42 + (((currsig - 5) * 2) / 3); } - else if(currsig == 4) + else if (currsig == 4) { retsig = 36; } - else if(currsig == 3) + else if (currsig == 3) { retsig = 27; } - else if(currsig == 2) + else if (currsig == 2) { retsig = 18; } - else if(currsig == 1) + else if (currsig == 1) { retsig = 9; } @@ -4873,7 +4873,7 @@ static void rtl8192_query_rxphystatus( precord_stats->RxMIMOSignalQuality[0] = -1; precord_stats->RxMIMOSignalQuality[1] = -1; - if(is_cck_rate) + if (is_cck_rate) { // // (1)Hardware does not provide RSSI for CCK @@ -4886,7 +4886,7 @@ static void rtl8192_query_rxphystatus( priv->stats.numqry_phystatusCCK++; - if(!priv->bCckHighPower) + if (!priv->bCckHighPower) { report = pcck_buf->cck_agc_rpt & 0xc0; report = report>>6; @@ -4941,14 +4941,14 @@ static void rtl8192_query_rxphystatus( { u8 sq; - if(pstats->RxPWDBAll > 40) + if (pstats->RxPWDBAll > 40) { sq = 100; }else { sq = pcck_buf->sq_rpt; - if(pcck_buf->sq_rpt > 64) + if (pcck_buf->sq_rpt > 64) sq = 0; else if (pcck_buf->sq_rpt < 20) sq = 100; @@ -5015,7 +5015,7 @@ static void rtl8192_query_rxphystatus( // // (3)EVM of HT rate // - if(pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 && + if (pdrvinfo->RxHT && pdrvinfo->RxRate>=DESC90_RATEMCS8 && pdrvinfo->RxRate<=DESC90_RATEMCS15) max_spatial_stream = 2; //both spatial stream make sense else @@ -5034,7 +5034,7 @@ static void rtl8192_query_rxphystatus( evm = rtl819x_evm_dbtopercentage(rx_evmX); //if(bpacket_match_bssid) { - if(i==0) // Fill value in RFD, Get the first spatial stream only + if (i==0) // Fill value in RFD, Get the first spatial stream only pstats->SignalQuality = precord_stats->SignalQuality = (u8)(evm & 0xff); pstats->RxMIMOSignalQuality[i] = precord_stats->RxMIMOSignalQuality[i] = (u8)(evm & 0xff); } @@ -5044,7 +5044,7 @@ static void rtl8192_query_rxphystatus( /* record rx statistics for debug */ rxsc_sgien_exflg = pofdm_buf->rxsc_sgien_exflg; prxsc = (phy_ofdm_rx_status_rxsc_sgien_exintfflag *)&rxsc_sgien_exflg; - if(pdrvinfo->BW) //40M channel + if (pdrvinfo->BW) //40M channel priv->stats.received_bwtype[1+prxsc->rxsc]++; else //20M channel priv->stats.received_bwtype[0]++; @@ -5052,7 +5052,7 @@ static void rtl8192_query_rxphystatus( //UI BSS List signal strength(in percentage), make it good looking, from 0~100. //It is assigned to the BSS List in GetValueFromBeaconOrProbeRsp(). - if(is_cck_rate) + if (is_cck_rate) { pstats->SignalStrength = precord_stats->SignalStrength = (u8)(rtl819x_signal_scale_mapping((long)pwdb_all));//PWDB_ALL; @@ -5112,25 +5112,25 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV)); bpacket_toself = bpacket_match_bssid & (eqMacAddr(praddr, priv->ieee80211->dev->dev_addr)); - if(WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON) + if (WLAN_FC_GET_FRAMETYPE(fc)== IEEE80211_STYPE_BEACON) { bPacketBeacon = true; //DbgPrint("Beacon 2, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf); } - if(WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK) + if (WLAN_FC_GET_FRAMETYPE(fc) == IEEE80211_STYPE_BLOCKACK) { - if((eqMacAddr(praddr,dev->dev_addr))) + if ((eqMacAddr(praddr,dev->dev_addr))) bToSelfBA = true; //DbgPrint("BlockAck, MatchBSSID = %d, ToSelf = %d \n", bPacketMatchBSSID, bPacketToSelf); } - if(bpacket_match_bssid) + if (bpacket_match_bssid) { priv->stats.numpacket_matchbssid++; } - if(bpacket_toself){ + if (bpacket_toself){ priv->stats.numpacket_toself++; } // @@ -5170,12 +5170,12 @@ UpdateReceivedRateHistogramStatistics8190( u32 preamble_guardinterval; //1: short preamble/GI, 0: long preamble/GI - if(stats->bCRC) + if (stats->bCRC) rcvType = 2; - else if(stats->bICV) + else if (stats->bICV) rcvType = 3; - if(stats->bShortPreamble) + if (stats->bShortPreamble) preamble_guardinterval = 1;// short else preamble_guardinterval = 0;// long @@ -5264,7 +5264,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, stats->Decrypted = !desc->SWDec; } - if((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP)) + if ((priv->ieee80211->pHTInfo->bCurrentHTSupport == true) && (priv->ieee80211->pairwise_key_type == KEY_TYPE_CCMP)) { stats->bHwError = false; } @@ -5273,7 +5273,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, stats->bHwError = stats->bCRC|stats->bICV; } - if(stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE) + if (stats->Length < 24 || stats->Length > MAX_8192U_RX_SIZE) stats->bHwError |= 1; // //Get Driver Info @@ -5285,10 +5285,10 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, stats->RxBufShift); /* unit: 0.5M */ /* TODO */ - if(!stats->bHwError){ + if (!stats->bHwError){ u8 ret_rate; ret_rate = HwRateToMRate90(driver_info->RxHT, driver_info->RxRate); - if(ret_rate == 0xff) + if (ret_rate == 0xff) { // Abnormal Case: Receive CRC OK packet with Rx descriptor indicating non supported rate. // Special Error Handling here, 2008.05.16, by Emily @@ -5320,7 +5320,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, // // Rx A-MPDU // - if(driver_info->FirstAGGR==1 || driver_info->PartAggr == 1) + if (driver_info->FirstAGGR==1 || driver_info->PartAggr == 1) RT_TRACE(COMP_RXDESC, "driver_info->FirstAGGR = %d, driver_info->PartAggr = %d\n", driver_info->FirstAGGR, driver_info->PartAggr); @@ -5330,14 +5330,14 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, // // Get Total offset of MPDU Frame Body // - if((stats->RxBufShift + stats->RxDrvInfoSize) > 0) { + if ((stats->RxBufShift + stats->RxDrvInfoSize) > 0) { stats->bShift = 1; skb_pull(skb,stats->RxBufShift + stats->RxDrvInfoSize); } #ifdef USB_RX_AGGREGATION_SUPPORT /* for the rx aggregated sub frame, the redundant space truly contained in the packet */ - if(bIsRxAggrSubframe) { + if (bIsRxAggrSubframe) { skb_pull(skb, 8); } #endif @@ -5345,7 +5345,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, //added by vivi, for MP, 20080108 stats->RxIs40MHzPacket = driver_info->BW; - if(stats->RxDrvInfoSize != 0) + if (stats->RxDrvInfoSize != 0) TranslateRxSignalStuff819xUsb(skb, stats, driver_info); } @@ -5393,7 +5393,7 @@ void rtl8192_rx_nomal(struct sk_buff *skb) #endif /* 20 is for ps-poll */ - if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) { + if ((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) { #ifdef USB_RX_AGGREGATION_SUPPORT TempByte = *(skb->data + sizeof(rx_desc_819x_usb)); #endif @@ -5421,20 +5421,20 @@ void rtl8192_rx_nomal(struct sk_buff *skb) rx_pkt_len = skb->len; ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data; unicast_packet = false; - if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) { + if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) { //TODO - }else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){ + }else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){ //TODO }else { /* unicast packet */ unicast_packet = true; } - if(!ieee80211_rx(priv->ieee80211,skb, &stats)) { + if (!ieee80211_rx(priv->ieee80211,skb, &stats)) { dev_kfree_skb_any(skb); } else { priv->stats.rxoktotal++; - if(unicast_packet) { + if (unicast_packet) { priv->stats.rxbytesunicast += rx_pkt_len; } } @@ -5470,7 +5470,7 @@ void rtl8192_rx_nomal(struct sk_buff *skb) query_rxdesc_status(agg_skb, &stats, true); PacketLength = stats.Length; - if(PacketLength > agg_skb->len) { + if (PacketLength > agg_skb->len) { break; } /* Process the MPDU received */ @@ -5481,19 +5481,19 @@ void rtl8192_rx_nomal(struct sk_buff *skb) rx_pkt_len = skb->len; ieee80211_hdr = (struct ieee80211_hdr_1addr *)skb->data; unicast_packet = false; - if(is_broadcast_ether_addr(ieee80211_hdr->addr1)) { + if (is_broadcast_ether_addr(ieee80211_hdr->addr1)) { //TODO - }else if(is_multicast_ether_addr(ieee80211_hdr->addr1)){ + }else if (is_multicast_ether_addr(ieee80211_hdr->addr1)){ //TODO }else { /* unicast packet */ unicast_packet = true; } - if(!ieee80211_rx(priv->ieee80211,skb, &stats)) { + if (!ieee80211_rx(priv->ieee80211,skb, &stats)) { dev_kfree_skb_any(skb); } else { priv->stats.rxoktotal++; - if(unicast_packet) { + if (unicast_packet) { priv->stats.rxbytesunicast += rx_pkt_len; } } @@ -5541,7 +5541,7 @@ rtl819xusb_process_received_packet( frame = pstats->virtual_address; frame_len = pstats->packetlength; #ifdef TODO // by amy about HCT - if(!Adapter->bInHctTest) + if (!Adapter->bInHctTest) CountRxErrStatistics(Adapter, pRfd); #endif { @@ -5613,7 +5613,7 @@ void rtl8192_rx_cmd(struct sk_buff *skb) .freq = IEEE80211_24GHZ_BAND, }; - if((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) + if ((skb->len >=(20 + sizeof(rx_desc_819x_usb))) && (skb->len < RX_URB_SIZE)) { query_rx_cmdpkt_desc_status(skb,&stats); @@ -5721,7 +5721,7 @@ static int rtl8192_usb_probe(struct usb_interface *intf, } RT_TRACE(COMP_INIT, "Driver probe completed1\n"); - if(rtl8192_init(dev)!=0){ + if (rtl8192_init(dev)!=0){ RT_TRACE(COMP_ERR, "Initialization failed"); ret = -ENODEV; goto fail; @@ -5773,7 +5773,7 @@ static void rtl8192_usb_disconnect(struct usb_interface *intf) struct net_device *dev = usb_get_intfdata(intf); struct r8192_priv *priv = ieee80211_priv(dev); - if(dev){ + if (dev){ unregister_netdev(dev); @@ -5873,7 +5873,7 @@ void rtl8192_try_wake_queue(struct net_device *dev, int pri) enough_desc = check_nic_enough_desc(dev,pri); spin_unlock_irqrestore(&priv->tx_lock,flags); - if(enough_desc) + if (enough_desc) ieee80211_wake_queue(priv->ieee80211); } @@ -5939,7 +5939,7 @@ void setKey( struct net_device *dev, TargetCommand = i+CAM_CONTENT_COUNT*EntryNo; TargetCommand |= BIT31|BIT16; - if(i==0){//MAC|Config + if (i==0){//MAC|Config TargetContent = (u32)(*(MacAddr+0)) << 16| (u32)(*(MacAddr+1)) << 24| (u32)usConfig; @@ -5948,7 +5948,7 @@ void setKey( struct net_device *dev, write_nic_dword(dev, RWCAM, TargetCommand); // printk("setkey cam =%8x\n", read_cam(dev, i+6*EntryNo)); } - else if(i==1){//MAC + else if (i==1){//MAC TargetContent = (u32)(*(MacAddr+2)) | (u32)(*(MacAddr+3)) << 8| (u32)(*(MacAddr+4)) << 16| @@ -5958,7 +5958,7 @@ void setKey( struct net_device *dev, } else { //Key Material - if(KeyContent !=NULL){ + if (KeyContent !=NULL){ write_nic_dword(dev, WCAMI, (u32)(*(KeyContent+i-2)) ); write_nic_dword(dev, RWCAM, TargetCommand); }