From: Bob Paauwe Date: Thu, 25 Jun 2015 21:54:07 +0000 (-0700) Subject: drm/i915: Update rps frequencies for BXT X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=350405623ff3f447813eaef2035272bf05281671;p=linux-beck.git drm/i915: Update rps frequencies for BXT Broxton is using a different register and different bit ordering for rps status capabilities. Also GT perf freqency register is different for Broxton so update that. Signed-off-by: Bob Paauwe Reviewed-by: Imre Deak Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index b509844df0dd..7d303e721a77 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1132,9 +1132,9 @@ static int i915_frequency_info(struct seq_file *m, void *unused) (rgvstat & MEMSTAT_PSTATE_MASK) >> MEMSTAT_PSTATE_SHIFT); } else if (IS_GEN6(dev) || (IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) || IS_BROADWELL(dev) || IS_GEN9(dev)) { - u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); - u32 rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS); - u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + u32 rp_state_limits; + u32 gt_perf_status; + u32 rp_state_cap; u32 rpmodectl, rpinclimit, rpdeclimit; u32 rpstat, cagf, reqf; u32 rpupei, rpcurup, rpprevup; @@ -1142,6 +1142,15 @@ static int i915_frequency_info(struct seq_file *m, void *unused) u32 pm_ier, pm_imr, pm_isr, pm_iir, pm_mask; int max_freq; + rp_state_limits = I915_READ(GEN6_RP_STATE_LIMITS); + if (IS_BROXTON(dev)) { + rp_state_cap = I915_READ(BXT_RP_STATE_CAP); + gt_perf_status = I915_READ(BXT_GT_PERF_STATUS); + } else { + rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); + } + /* RPSTAT1 is in the GT power well */ ret = mutex_lock_interruptible(&dev->struct_mutex); if (ret) @@ -1229,7 +1238,8 @@ static int i915_frequency_info(struct seq_file *m, void *unused) seq_printf(m, "Down threshold: %d%%\n", dev_priv->rps.down_threshold); - max_freq = (rp_state_cap & 0xff0000) >> 16; + max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 0 : + rp_state_cap >> 16) & 0xff; max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1); seq_printf(m, "Lowest (RPN) frequency: %dMHz\n", intel_gpu_freq(dev_priv, max_freq)); @@ -1239,7 +1249,8 @@ static int i915_frequency_info(struct seq_file *m, void *unused) seq_printf(m, "Nominal (RP1) frequency: %dMHz\n", intel_gpu_freq(dev_priv, max_freq)); - max_freq = rp_state_cap & 0xff; + max_freq = (IS_BROXTON(dev) ? rp_state_cap >> 16 : + rp_state_cap >> 0) & 0xff; max_freq *= (IS_SKYLAKE(dev) ? GEN9_FREQ_SCALER : 1); seq_printf(m, "Max non-overclocked (RP0) frequency: %dMHz\n", intel_gpu_freq(dev_priv, max_freq)); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c19067c843e8..b6c8037a9e54 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2734,8 +2734,10 @@ enum skl_disp_power_wells { #define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7 #define GEN6_GT_PERF_STATUS (MCHBAR_MIRROR_BASE_SNB + 0x5948) +#define BXT_GT_PERF_STATUS (MCHBAR_MIRROR_BASE_SNB + 0x7070) #define GEN6_RP_STATE_LIMITS (MCHBAR_MIRROR_BASE_SNB + 0x5994) #define GEN6_RP_STATE_CAP (MCHBAR_MIRROR_BASE_SNB + 0x5998) +#define BXT_RP_STATE_CAP 0x138170 #define INTERVAL_1_28_US(us) (((us) * 100) >> 7) #define INTERVAL_1_33_US(us) (((us) * 3) >> 2) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 32ff034a0875..213da42d6c24 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4288,13 +4288,21 @@ static void gen6_init_rps_frequencies(struct drm_device *dev) u32 ddcc_status = 0; int ret; - rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); /* All of these values are in units of 50MHz */ dev_priv->rps.cur_freq = 0; /* static values from HW: RP0 > RP1 > RPn (min_freq) */ - dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; - dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; - dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; + if (IS_BROXTON(dev)) { + rp_state_cap = I915_READ(BXT_RP_STATE_CAP); + dev_priv->rps.rp0_freq = (rp_state_cap >> 16) & 0xff; + dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; + dev_priv->rps.min_freq = (rp_state_cap >> 0) & 0xff; + } else { + rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); + dev_priv->rps.rp0_freq = (rp_state_cap >> 0) & 0xff; + dev_priv->rps.rp1_freq = (rp_state_cap >> 8) & 0xff; + dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff; + } + if (IS_SKYLAKE(dev)) { /* Store the frequency values in 16.66 MHZ units, which is the natural hardware unit for SKL */