From: Archit Taneja Date: Mon, 17 Sep 2012 09:12:04 +0000 (+0300) Subject: OMAPDSS: tpo-td043: remove platform_enable/disable callbacks X-Git-Tag: next-20130422~69^2~5^2~6 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3552fb78f1d8d0403ca7f8224da3e85bf2776321;p=karo-tx-linux.git OMAPDSS: tpo-td043: remove platform_enable/disable callbacks The tpo-td043 panel driver now manages the gpios required to configure the panel. This was previously done in omap_dss_device's platform_enable/disable callbacks defined in board files using this panel. All the board files using this panel now pass the gpio information as platform data via the panel_tpo_td043_data struct, which is needed by the panel driver to configure the gpios connected to the panel. Hence, the platform_enable/disable ops can be safely removed now. Signed-off-by: Archit Taneja --- diff --git a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c index e3252bf4781a..abf2bc4a18ab 100644 --- a/drivers/video/omap2/displays/panel-tpo-td043mtea1.c +++ b/drivers/video/omap2/displays/panel-tpo-td043mtea1.c @@ -351,12 +351,6 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev) if (r) goto err0; - if (dssdev->platform_enable) { - r = dssdev->platform_enable(dssdev); - if (r) - goto err1; - } - /* * If we are resuming from system suspend, SPI clocks might not be * enabled yet, so we'll program the LCD from SPI PM resume callback. @@ -383,9 +377,6 @@ static void tpo_td043_disable_dss(struct omap_dss_device *dssdev) if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) return; - if (dssdev->platform_disable) - dssdev->platform_disable(dssdev); - omapdss_dpi_display_disable(dssdev); if (!tpo_td043->spi_suspended)