From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Mon, 10 Aug 2015 17:28:08 +0000 (-0700)
Subject: staging: comedi: ni_usb6501: fix possible out-of-bounds access
X-Git-Tag: v4.3-rc1~158^2~138
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=365741e6a6ab7f31ff885c26dd173d9590d1e8ca;p=karo-tx-linux.git

staging: comedi: ni_usb6501: fix possible out-of-bounds access

Coverity reports a possible Out-of-bounds access (ARRAY_VS_SINGLETON)
with the 'const u8 *port' parameter passed to ni6501_port_command().
This param is an actual array for the SET_PORT_DIR operation, called
by ni6501_dio_insn_config(). But for the WRITE_PORT and READ_PORT
operations, called by ni6501_dio_insn_bits(), it is just the address
of an u8 local variable.

Fix the coverity issue by changing the parameter to an unsigned int
and pass the raw values from ni6501_dio_insn_config() and
ni6501_dio_insn_bits(). ni6501_port_command() then handles the masking
and shifting needed to load the value into the u8 transmit buffer.

For consistency, change the access of the 'bitmap' parameter from an
array access to a pointer operation.

Reported-by: coverity (CID 1248624)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/ni_usb6501.c b/drivers/staging/comedi/drivers/ni_usb6501.c
index 5f649f88d55c..88de8da3eff3 100644
--- a/drivers/staging/comedi/drivers/ni_usb6501.c
+++ b/drivers/staging/comedi/drivers/ni_usb6501.c
@@ -172,7 +172,7 @@ struct ni6501_private {
 };
 
 static int ni6501_port_command(struct comedi_device *dev, int command,
-			       const u8 *port, u8 *bitmap)
+			       unsigned int val, u8 *bitmap)
 {
 	struct usb_device *usb = comedi_to_usb_dev(dev);
 	struct ni6501_private *devpriv = dev->private;
@@ -190,22 +190,22 @@ static int ni6501_port_command(struct comedi_device *dev, int command,
 		request_size = sizeof(READ_PORT_REQUEST);
 		response_size = sizeof(READ_PORT_RESPONSE);
 		memcpy(tx, READ_PORT_REQUEST, request_size);
-		tx[14] = port[0];
+		tx[14] = val & 0xff;
 		break;
 	case WRITE_PORT:
 		request_size = sizeof(WRITE_PORT_REQUEST);
 		response_size = sizeof(GENERIC_RESPONSE);
 		memcpy(tx, WRITE_PORT_REQUEST, request_size);
-		tx[14] = port[0];
-		tx[17] = bitmap[0];
+		tx[14] = val & 0xff;
+		tx[17] = *bitmap;
 		break;
 	case SET_PORT_DIR:
 		request_size = sizeof(SET_PORT_DIR_REQUEST);
 		response_size = sizeof(GENERIC_RESPONSE);
 		memcpy(tx, SET_PORT_DIR_REQUEST, request_size);
-		tx[14] = port[0];
-		tx[15] = port[1];
-		tx[16] = port[2];
+		tx[14] = val & 0xff;
+		tx[15] = (val >> 8) & 0xff;
+		tx[16] = (val >> 16) & 0xff;
 		break;
 	default:
 		ret = -EINVAL;
@@ -235,7 +235,7 @@ static int ni6501_port_command(struct comedi_device *dev, int command,
 	/* Check if results are valid */
 
 	if (command == READ_PORT) {
-		bitmap[0] = devpriv->usb_rx_buf[14];
+		*bitmap = devpriv->usb_rx_buf[14];
 		/* mask bitmap for comparing */
 		devpriv->usb_rx_buf[14] = 0x00;
 
@@ -349,17 +349,12 @@ static int ni6501_dio_insn_config(struct comedi_device *dev,
 				  unsigned int *data)
 {
 	int ret;
-	u8 port[3];
 
 	ret = comedi_dio_insn_config(dev, s, insn, data, 0);
 	if (ret)
 		return ret;
 
-	port[0] = (s->io_bits) & 0xff;
-	port[1] = (s->io_bits >> 8) & 0xff;
-	port[2] = (s->io_bits >> 16) & 0xff;
-
-	ret = ni6501_port_command(dev, SET_PORT_DIR, port, NULL);
+	ret = ni6501_port_command(dev, SET_PORT_DIR, s->io_bits, NULL);
 	if (ret)
 		return ret;
 
@@ -382,7 +377,7 @@ static int ni6501_dio_insn_bits(struct comedi_device *dev,
 		if (mask & (0xFF << port * 8)) {
 			bitmap = (s->state >> port * 8) & 0xFF;
 			ret = ni6501_port_command(dev, WRITE_PORT,
-						  &port, &bitmap);
+						  port, &bitmap);
 			if (ret)
 				return ret;
 		}
@@ -391,7 +386,7 @@ static int ni6501_dio_insn_bits(struct comedi_device *dev,
 	data[1] = 0;
 
 	for (port = 0; port < 3; port++) {
-		ret = ni6501_port_command(dev, READ_PORT, &port, &bitmap);
+		ret = ni6501_port_command(dev, READ_PORT, port, &bitmap);
 		if (ret)
 			return ret;
 		data[1] |= bitmap << port * 8;