From: Antti Palosaari Date: Mon, 1 Aug 2011 04:15:30 +0000 (-0300) Subject: [media] em28xx: add support for PCTV DVB-S2 Stick 460e [2013:024f] X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=36588715fc0ed3ff0ffb025dc841652cb3b2b667;p=linux-beck.git [media] em28xx: add support for PCTV DVB-S2 Stick 460e [2013:024f] It is based of... * Empia EM28174 * NXP TDA10071 & Conexant CX24118A combo * Allegro A8293 Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig index 281ee427c2ab..f6f622e123bd 100644 --- a/drivers/media/video/em28xx/Kconfig +++ b/drivers/media/video/em28xx/Kconfig @@ -41,6 +41,8 @@ config VIDEO_EM28XX_DVB select DVB_CXD2820R if !DVB_FE_CUSTOMISE select DVB_DRXK if !DVB_FE_CUSTOMISE select DVB_TDA18271C2DD if !DVB_FE_CUSTOMISE + select DVB_TDA10071 if !DVB_FE_CUSTOMISE + select DVB_A8293 if !DVB_FE_CUSTOMISE select VIDEOBUF_DVB ---help--- This adds support for DVB cards based on the diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 013e946bdc45..8845ff8cee50 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -317,6 +317,25 @@ static struct em28xx_reg_seq terratec_h5_digital[] = { }; #endif +/* 2013:024f PCTV DVB-S2 Stick 460e + * GPIO_0 - POWER_ON + * GPIO_1 - BOOST + * GPIO_2 - VUV_LNB (red LED) + * GPIO_3 - EXT_12V + * GPIO_4 - INT_DEM (DEMOD GPIO_0) + * GPIO_5 - INT_LNB + * GPIO_6 - RESET_DEM + * GPIO_7 - LED (green LED) + */ +static struct em28xx_reg_seq pctv_460e[] = { + {EM2874_R80_GPIO, 0x01, 0xff, 50}, + {0x0d, 0xff, 0xff, 50}, + {EM2874_R80_GPIO, 0x41, 0xff, 50}, /* GPIO_6=1 */ + {0x0d, 0x42, 0xff, 50}, + {EM2874_R80_GPIO, 0x61, 0xff, 50}, /* GPIO_5=1 */ + { -1, -1, -1, -1}, +}; + /* * Board definitions */ @@ -1810,6 +1829,17 @@ struct em28xx_board em28xx_boards[] = { .has_dvb = 1, .ir_codes = RC_MAP_PINNACLE_PCTV_HD, }, + /* 2013:024f PCTV DVB-S2 Stick 460e + * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ + [EM28174_BOARD_PCTV_460E] = { + .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT | + EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, + .name = "PCTV DVB-S2 Stick (460e)", + .tuner_type = TUNER_ABSENT, + .tuner_gpio = pctv_460e, + .has_dvb = 1, + .ir_codes = RC_MAP_PINNACLE_PCTV_HD, + }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); @@ -1941,6 +1971,8 @@ struct usb_device_id em28xx_id_table[] = { .driver_info = EM2870_BOARD_KWORLD_A340 }, { USB_DEVICE(0x2013, 0x024f), .driver_info = EM28174_BOARD_PCTV_290E }, + { USB_DEVICE(0x2013, 0x024c), + .driver_info = EM28174_BOARD_PCTV_460E }, { }, }; MODULE_DEVICE_TABLE(usb, em28xx_id_table); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 62b558ddc02e..cef7a2d409cb 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -42,6 +42,8 @@ #include "cxd2820r.h" #include "tda18271c2dd.h" #include "drxk.h" +#include "tda10071.h" +#include "a8293.h" MODULE_DESCRIPTION("driver for em28xx based DVB cards"); MODULE_AUTHOR("Mauro Carvalho Chehab "); @@ -441,6 +443,19 @@ static struct tda18271_config em28xx_cxd2820r_tda18271_config = { .gate = TDA18271_GATE_DIGITAL, }; +static const struct tda10071_config em28xx_tda10071_config = { + .i2c_address = 0x55, /* (0xaa >> 1) */ + .i2c_wr_max = 64, + .ts_mode = TDA10071_TS_SERIAL, + .spec_inv = 0, + .xtal = 40444000, /* 40.444 MHz */ + .pll_multiplier = 20, +}; + +static const struct a8293_config em28xx_a8293_config = { + .i2c_addr = 0x08, /* (0x10 >> 1) */ +}; + /* ------------------------------------------------------------------ */ static int em28xx_attach_xc3028(u8 addr, struct em28xx *dev) @@ -808,6 +823,16 @@ static int em28xx_dvb_init(struct em28xx *dev) sizeof(dvb->fe[0]->ops.tuner_ops)); break; + case EM28174_BOARD_PCTV_460E: + /* attach demod */ + dvb->fe[0] = dvb_attach(tda10071_attach, + &em28xx_tda10071_config, &dev->i2c_adap); + + /* attach SEC */ + if (dvb->fe[0]) + dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap, + &em28xx_a8293_config); + break; default: em28xx_errdev("/2: The frontend of your DVB/ATSC card" " isn't supported yet\n"); diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index d80658bf3da9..1626e4a83407 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -120,6 +120,7 @@ #define EM2874_BOARD_LEADERSHIP_ISDBT 77 #define EM28174_BOARD_PCTV_290E 78 #define EM2884_BOARD_TERRATEC_H5 79 +#define EM28174_BOARD_PCTV_460E 80 /* Limits minimum and default number of buffers */ #define EM28XX_MIN_BUF 4