From: Peter Seiderer Date: Tue, 2 Jun 2015 19:07:17 +0000 (+0200) Subject: ARM: dts: sabrelite: add CAN support X-Git-Tag: v4.3-rc1~120^2~7^2~38 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=366c595f1381b89c52153f753a6499c349410a02;p=karo-tx-linux.git ARM: dts: sabrelite: add CAN support Signed-off-by: Peter Seiderer Tested-by: Eric Nelson Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index e00c44f6a0df..fe010590fda2 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -53,6 +53,17 @@ gpio = <&gpio3 22 0>; enable-active-high; }; + + reg_can_xcvr: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; }; gpio-keys { @@ -148,6 +159,13 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; @@ -239,6 +257,20 @@ >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1