From: Marcel Ziswiler Date: Wed, 5 Aug 2015 22:47:10 +0000 (+0200) Subject: apalis/colibri_t20/30: clean-up X-Git-Tag: KARO-TXSD-2017-03-15~3618 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=36a01bdd8046e60d9b249b409457d4fbb5b9396e;p=karo-tx-uboot.git apalis/colibri_t20/30: clean-up Various clean-ups either in comments, order or spacing without any functional impact: - Add some comments in the device trees resp. reorder some parameters for consistency across all our modules. - Sort some include files alphabetically (while leaving common.h on top of course). - Streamline some comments in the configuration files and fix the spacing from using spaces to tabs. Signed-off-by: Marcel Ziswiler Acked-by: Stephen Warren Signed-off-by: Tom Warren --- diff --git a/arch/arm/dts/tegra20-colibri.dts b/arch/arm/dts/tegra20-colibri.dts index 8eaac4f5a5..f058d45c5c 100644 --- a/arch/arm/dts/tegra20-colibri.dts +++ b/arch/arm/dts/tegra20-colibri.dts @@ -36,11 +36,13 @@ }; usb@c5004000 { + /* VBUS_LAN */ nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; nvidia,vbus-gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; usb@c5008000 { + /* USBH_PEN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; }; @@ -82,8 +84,8 @@ sdhci@c8000600 { status = "okay"; - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; }; lcd_panel: panel { diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index 36533dc840..1da7260295 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -82,9 +82,9 @@ /* EHCI instance 1: USB2_DP/N -> AX88772B */ usb@7d004000 { status = "okay"; - phy_type = "utmi"; /* VBUS_LAN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; + phy_type = "utmi"; }; /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c index b7a221902b..879006f8e0 100644 --- a/board/toradex/apalis_t30/apalis_t30.c +++ b/board/toradex/apalis_t30/apalis_t30.c @@ -6,13 +6,13 @@ */ #include -#include #include #include #include #include #include #include +#include #include #include @@ -59,6 +59,7 @@ int tegra_pcie_board_init(void) debug("%s: Cannot find PMIC I2C chip\n", __func__); return err; } + /* TPS659110: VDD2_OP_REG = 1.05V */ data[0] = 0x27; addr = 0x25; diff --git a/board/toradex/colibri_t30/colibri_t30.c b/board/toradex/colibri_t30/colibri_t30.c index 7ca79eb7f9..44b5beb928 100644 --- a/board/toradex/colibri_t30/colibri_t30.c +++ b/board/toradex/colibri_t30/colibri_t30.c @@ -6,14 +6,14 @@ */ #include -#include #include +#include #include #include +#include #include -#include "pinmux-config-colibri_t30.h" #include -#include +#include "pinmux-config-colibri_t30.h" int arch_misc_init(void) { diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index 27c013baba..6c0ae22df9 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -1,6 +1,8 @@ /* * Copyright (c) 2014-2015 Marcel Ziswiler * + * Configuration settings for the Toradex Apalis T30 modules. + * * SPDX-License-Identifier: GPL-2.0+ */ @@ -26,7 +28,7 @@ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C -/* SD/MMC */ +/* SD/MMC support */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC @@ -38,10 +40,10 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 -/* USB Host support */ +/* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA -#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index 09a65d544d..7611fc5004 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -1,6 +1,8 @@ /* * Copyright (C) 2012 Lucas Stach * + * Configuration settings for the Toradex Colibri T20 modules. + * * SPDX-License-Identifier: GPL-2.0+ */ @@ -36,7 +38,7 @@ #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_ULPI #define CONFIG_USB_ULPI_VIEWPORT -#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB @@ -63,7 +65,7 @@ /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_TEGRA_NAND -#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Dynamic MTD partition support */ #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ @@ -78,9 +80,9 @@ /* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET (SZ_2M) -#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */ -#define CONFIG_ENV_SIZE (SZ_64K) +#define CONFIG_ENV_OFFSET (SZ_2M) +#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */ +#define CONFIG_ENV_SIZE (SZ_64K) /* UBI */ #define CONFIG_CMD_BOOTZ diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index 25885d4431..ef743b0d33 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -1,6 +1,8 @@ /* * Copyright (c) 2013-2015 Stefan Agner * + * Configuration settings for the Toradex Colibri T30 modules. + * * SPDX-License-Identifier: GPL-2.0+ */ @@ -26,7 +28,7 @@ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C -/* SD/MMC */ +/* SD/MMC support */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC #define CONFIG_TEGRA_MMC @@ -38,10 +40,10 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SYS_MMC_ENV_PART 2 -/* USB Host support */ +/* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA -#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB