From: Mikko Perttunen <mperttunen@nvidia.com>
Date: Wed, 18 Jun 2014 14:23:23 +0000 (+0300)
Subject: clk: tegra: Enable hardware control of SATA PLL
X-Git-Tag: v3.17-rc1~145^2~30^2~4
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=37ab366251167cd6e517a391143db13cc2d3d65c;p=karo-tx-linux.git

clk: tegra: Enable hardware control of SATA PLL

This makes the SATA PLL be controlled by hardware instead of software.
This is required for working SATA support.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
---

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 637b62ccc91e..f070c365f5f7 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -110,6 +110,9 @@
 #define XUSBIO_PLL_CFG0_SEQ_ENABLE		BIT(24)
 #define XUSBIO_PLL_CFG0_SEQ_START_STATE		BIT(25)
 
+#define SATA_PLL_CFG0		0x490
+#define SATA_PLL_CFG0_PADPLL_RESET_SWCTL	BIT(0)
+
 #define PLLE_MISC_PLLE_PTS	BIT(8)
 #define PLLE_MISC_IDDQ_SW_VALUE	BIT(13)
 #define PLLE_MISC_IDDQ_SW_CTRL	BIT(14)
@@ -1361,6 +1364,11 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
 	val |= XUSBIO_PLL_CFG0_SEQ_ENABLE;
 	pll_writel(val, XUSBIO_PLL_CFG0, pll);
 
+	/* Enable hw control of SATA pll */
+	val = pll_readl(SATA_PLL_CFG0, pll);
+	val &= ~SATA_PLL_CFG0_PADPLL_RESET_SWCTL;
+	pll_writel(val, SATA_PLL_CFG0, pll);
+
 out:
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);