From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 25 Aug 2005 14:43:29 +0000 (+0200)
Subject: [PATCH] I2C: Drop debug eeprom dump code in pcilynx
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=386625f9f5cd94d10a21241b555b130dcec484fb;p=linux-beck.git

[PATCH] I2C: Drop debug eeprom dump code in pcilynx

The pcilynx driver includes code to dump the contents of an i2c eeprom
for debugging purposes. The same can be done from userspace using the
i2cdump tool (part of the lm_sensors project) instead, in a more
efficient and flexible way.

Thus I would suggest that this functionality be simply dropped from the
pcilynx driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c
index 36074e6eeebb..6b1ab875333b 100644
--- a/drivers/ieee1394/pcilynx.c
+++ b/drivers/ieee1394/pcilynx.c
@@ -1464,26 +1464,6 @@ static int __devinit add_card(struct pci_dev *dev,
                                                   { 0x50, I2C_M_RD, 20, (unsigned char*) lynx->bus_info_block }
                                                 };
 
-
-#ifdef CONFIG_IEEE1394_VERBOSEDEBUG
-                        union i2c_smbus_data data;
-
-                        if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE,NULL))
-                                PRINT(KERN_ERR, lynx->id,"eeprom read start has failed");
-                        else
-                        {
-                                u16 addr;
-                                for (addr=0x00; addr < 0x100; addr++) {
-                                        if (i2c_smbus_xfer(i2c_ad, 80, 0, I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE,& data)) {
-                                                PRINT(KERN_ERR, lynx->id, "unable to read i2c %x", addr);
-                                                break;
-                                        }
-                                        else
-                                                PRINT(KERN_DEBUG, lynx->id,"got serial eeprom data at %x: %x",addr, data.byte);
-                                }
-                        }
-#endif
-
                         /* we use i2c_transfer, because i2c_smbus_read_block_data does not work properly and we
                            do it more efficiently in one transaction rather then using several reads */
                         if (i2c_transfer(i2c_ad, msg, 2) < 0) {