From: Russell King Date: Wed, 22 Dec 2010 17:59:16 +0000 (+0000) Subject: ARM: PL011: add DMA burst threshold support for ST variants X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=38d624361b2a82d6317c379aebf81b1b28210bb0;p=linux-beck.git ARM: PL011: add DMA burst threshold support for ST variants ST Micro variants has some specific dma burst threshold compensation, which allows them to make better use of a DMA controller. Add support to set this up. Based on a patch from Linus Walleij. Acked-by: Linus Walleij Signed-off-by: Russell King --- diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index ab025dc52fa4..e76d7d000128 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -74,6 +74,7 @@ struct vendor_data { unsigned int lcrh_tx; unsigned int lcrh_rx; bool oversampling; + bool dma_threshold; }; static struct vendor_data vendor_arm = { @@ -82,6 +83,7 @@ static struct vendor_data vendor_arm = { .lcrh_tx = UART011_LCRH, .lcrh_rx = UART011_LCRH, .oversampling = false, + .dma_threshold = false, }; static struct vendor_data vendor_st = { @@ -90,6 +92,7 @@ static struct vendor_data vendor_st = { .lcrh_tx = ST_UART011_LCRH_TX, .lcrh_rx = ST_UART011_LCRH_RX, .oversampling = true, + .dma_threshold = true, }; /* Deals with DMA transactions */ @@ -527,6 +530,15 @@ static void pl011_dma_startup(struct uart_amba_port *uap) /* Turn on DMA error (RX/TX will be enabled on demand) */ uap->dmacr |= UART011_DMAONERR; writew(uap->dmacr, uap->port.membase + UART011_DMACR); + + /* + * ST Micro variants has some specific dma burst threshold + * compensation. Set this to 16 bytes, so burst will only + * be issued above/below 16 bytes. + */ + if (uap->vendor->dma_threshold) + writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + uap->port.membase + ST_UART011_DMAWM); } static void pl011_dma_shutdown(struct uart_amba_port *uap) diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 577f22eb9225..5479fdc849e9 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -113,6 +113,21 @@ #define UART01x_LCRH_PEN 0x02 #define UART01x_LCRH_BRK 0x01 +#define ST_UART011_DMAWM_RX_1 (0 << 3) +#define ST_UART011_DMAWM_RX_2 (1 << 3) +#define ST_UART011_DMAWM_RX_4 (2 << 3) +#define ST_UART011_DMAWM_RX_8 (3 << 3) +#define ST_UART011_DMAWM_RX_16 (4 << 3) +#define ST_UART011_DMAWM_RX_32 (5 << 3) +#define ST_UART011_DMAWM_RX_48 (6 << 3) +#define ST_UART011_DMAWM_TX_1 0 +#define ST_UART011_DMAWM_TX_2 1 +#define ST_UART011_DMAWM_TX_4 2 +#define ST_UART011_DMAWM_TX_8 3 +#define ST_UART011_DMAWM_TX_16 4 +#define ST_UART011_DMAWM_TX_32 5 +#define ST_UART011_DMAWM_TX_48 6 + #define UART010_IIR_RTIS 0x08 #define UART010_IIR_TIS 0x04 #define UART010_IIR_RIS 0x02