From: Matthias Schid Date: Wed, 26 Jun 2013 14:25:53 +0000 (+0200) Subject: scsi/megaraid fixed several typos in comments X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3948ff8bba6c09baf1a4722d4021139a5044ae45;p=linux-beck.git scsi/megaraid fixed several typos in comments Fixed several typos in comments in megaraid_mbox.c, megaraid_mm.c and megaraid_sas_fusion.h. Signed-off-by: Matthias Schid Signed-off-by: Stefan Huber Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e6a1e0b38a19..515c9629e9fe 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -549,7 +549,7 @@ out_probe_one: /** * megaraid_detach_one - release framework resources and call LLD release routine - * @pdev : handle for our PCI cofiguration space + * @pdev : handle for our PCI configuration space * * This routine is called during driver unload. We free all the allocated * resources and call the corresponding LLD so that it can also release all @@ -979,7 +979,7 @@ megaraid_fini_mbox(adapter_t *adapter) * @adapter : soft state of the raid controller * * Allocate and align the shared mailbox. This maibox is used to issue - * all the commands. For IO based controllers, the mailbox is also regsitered + * all the commands. For IO based controllers, the mailbox is also registered * with the FW. Allocate memory for all commands as well. * This is our big allocator. */ @@ -2027,7 +2027,7 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, * @scb : scsi control block * @scp : scsi command from the mid-layer * - * Prepare a command for the scsi physical devices. This rountine prepares + * Prepare a command for the scsi physical devices. This routine prepares * commands for devices which can take extended CDBs (>10 bytes). */ static void @@ -2586,7 +2586,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp) } /** - * megaraid_reset_handler - device reset hadler for mailbox based driver + * megaraid_reset_handler - device reset handler for mailbox based driver * @scp : reference command * * Reset handler for the mailbox based controller. First try to find out if @@ -3446,7 +3446,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) * megaraid_mbox_setup_device_map - manage device ids * @adapter : Driver's soft state * - * Manange the device ids to have an appropriate mapping between the kernel + * Manage the device ids to have an appropriate mapping between the kernel * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index 25506c777381..dfffd0f37916 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -896,7 +896,7 @@ hinfo_to_cinfo(mraid_hba_info_t *hinfo, mcontroller_t *cinfo) /** * mraid_mm_register_adp - Registration routine for low level drivers - * @lld_adp : Adapter objejct + * @lld_adp : Adapter object */ int mraid_mm_register_adp(mraid_mmadp_t *lld_adp) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 12ff01cf6799..4eb84011cb07 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -88,7 +88,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define MEGASAS_FUSION_IN_RESET 0 /* - * Raid Context structure which describes MegaRAID specific IO Paramenters + * Raid Context structure which describes MegaRAID specific IO Parameters * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames */