From: Laxman Dewangan Date: Wed, 7 Mar 2012 13:16:05 +0000 (+0530) Subject: mfd: Use correct variable name for tps65910 regmap config X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=39ecb0376508b5cd20a951388d10aed2d719a77f;p=linux-beck.git mfd: Use correct variable name for tps65910 regmap config This was the copy-paste issue in reg cache support code where variable name for regmap config was not really starting from the device name, it was starting from some other device name. Fixing this so that variable name contains actual device name. Signed-off-by: Laxman Dewangan Signed-off-by: Samuel Ortiz --- diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 1c4f53efee74..bf2b25ebf2ca 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -81,7 +81,7 @@ static bool is_volatile_reg(struct device *dev, unsigned int reg) return true; } -static const struct regmap_config rc5t583_regmap_config = { +static const struct regmap_config tps65910_regmap_config = { .reg_bits = 8, .val_bits = 8, .volatile_reg = is_volatile_reg, @@ -120,7 +120,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, tps65910->write = tps65910_i2c_write; mutex_init(&tps65910->io_mutex); - tps65910->regmap = regmap_init_i2c(i2c, &rc5t583_regmap_config); + tps65910->regmap = regmap_init_i2c(i2c, &tps65910_regmap_config); if (IS_ERR(tps65910->regmap)) { ret = PTR_ERR(tps65910->regmap); dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);