From: Ben Dooks Date: Mon, 16 Mar 2015 11:52:43 +0000 (+0000) Subject: dmaengine: pl330: fix issues with big-endian armv7 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3a2307f72e684199a27ae9d8e7cfd98e8b05c8db;p=linux-beck.git dmaengine: pl330: fix issues with big-endian armv7 When running Xilinx Zynq in big-endian mode the pl330 driver fails to pass the dmatest suite. To fix this, ensure all non byte values are written in little endian. As a note, the documentation does not mention if it will do big-endian descriptor fetches, only that it will swap the data in flight. Signed-off-by: Ben Dooks -- Vinod Koul Dan Williams DMA List Maxime Ripard Jassi Brar Liviu Dudau Linux ARM Kernel Signed-off-by: Vinod Koul --- diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 0e1f56772855..f76c94c148f4 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -556,7 +556,7 @@ static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[], buf[0] = CMD_DMAADDH; buf[0] |= (da << 1); - *((u16 *)&buf[1]) = val; + *((__le16 *)&buf[1]) = cpu_to_le16(val); PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n", da == 1 ? "DA" : "SA", val); @@ -710,7 +710,7 @@ static inline u32 _emit_MOV(unsigned dry_run, u8 buf[], buf[0] = CMD_DMAMOV; buf[1] = dst; - *((u32 *)&buf[2]) = val; + *((__le32 *)&buf[2]) = cpu_to_le32(val); PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n", dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val); @@ -888,7 +888,7 @@ static inline u32 _emit_GO(unsigned dry_run, u8 buf[], buf[1] = chan & 0x7; - *((u32 *)&buf[2]) = addr; + *((__le32 *)&buf[2]) = cpu_to_le32(addr); return SZ_DMAGO; } @@ -928,7 +928,7 @@ static inline void _execute_DBGINSN(struct pl330_thread *thrd, } writel(val, regs + DBGINST0); - val = *((u32 *)&insn[2]); + val = le32_to_cpu(*((__le32 *)&insn[2])); writel(val, regs + DBGINST1); /* If timed out due to halted state-machine */