From: Ville Syrjälä Date: Thu, 27 Aug 2015 20:56:06 +0000 (+0300) Subject: drm/i915: Add port A HPD support for BDW X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3a3b3c7da37b35955c7c6a36a1f059d02f17eafb;p=linux-beck.git drm/i915: Add port A HPD support for BDW Wire up the port A HPD for BDW. Compared to earlier platforms the interrupt setup is a bit different, but basically everything else looks the same. v2: 0 initialize pin_mask/long_mask due to intel_get_hpd_pins() changes Check for BDW before processing the HPD to not break BXT Set found=true when processing port A HPD Sort out the mess I made of the irq setup in v1 Warn about bad irq mask vs. enable bits in bdw_update_port_irq() (Paulo) Signed-off-by: Ville Syrjälä Reviewed-by: Paulo Zanoni Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 0aa87d03a619..03c79f6d46fc 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -53,6 +53,10 @@ static const u32 hpd_ivb[HPD_NUM_PINS] = { [HPD_PORT_A] = DE_DP_A_HOTPLUG_IVB, }; +static const u32 hpd_bdw[HPD_NUM_PINS] = { + [HPD_PORT_A] = GEN8_PORT_DP_A_HOTPLUG, +}; + static const u32 hpd_ibx[HPD_NUM_PINS] = { [HPD_CRT] = SDE_CRT_HOTPLUG, [HPD_SDVO_B] = SDE_SDVOB_HOTPLUG, @@ -370,6 +374,38 @@ void gen6_disable_rps_interrupts(struct drm_device *dev) synchronize_irq(dev->irq); } +/** + * bdw_update_port_irq - update DE port interrupt + * @dev_priv: driver private + * @interrupt_mask: mask of interrupt bits to update + * @enabled_irq_mask: mask of interrupt bits to enable + */ +static void bdw_update_port_irq(struct drm_i915_private *dev_priv, + uint32_t interrupt_mask, + uint32_t enabled_irq_mask) +{ + uint32_t new_val; + uint32_t old_val; + + assert_spin_locked(&dev_priv->irq_lock); + + WARN_ON(enabled_irq_mask & ~interrupt_mask); + + if (WARN_ON(!intel_irqs_enabled(dev_priv))) + return; + + old_val = I915_READ(GEN8_DE_PORT_IMR); + + new_val = old_val; + new_val &= ~interrupt_mask; + new_val |= (~enabled_irq_mask & interrupt_mask); + + if (new_val != old_val) { + I915_WRITE(GEN8_DE_PORT_IMR, new_val); + POSTING_READ(GEN8_DE_PORT_IMR); + } +} + /** * ibx_display_interrupt_update - update SDEIMR * @dev_priv: driver private @@ -2145,10 +2181,24 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg) tmp = I915_READ(GEN8_DE_PORT_IIR); if (tmp) { bool found = false; + u32 hotplug_trigger = tmp & GEN8_PORT_DP_A_HOTPLUG; I915_WRITE(GEN8_DE_PORT_IIR, tmp); ret = IRQ_HANDLED; + if (IS_BROADWELL(dev) && hotplug_trigger) { + u32 dig_hotplug_reg, pin_mask = 0, long_mask = 0; + + dig_hotplug_reg = I915_READ(DIGITAL_PORT_HOTPLUG_CNTRL); + I915_WRITE(DIGITAL_PORT_HOTPLUG_CNTRL, dig_hotplug_reg); + + intel_get_hpd_pins(&pin_mask, &long_mask, hotplug_trigger, + dig_hotplug_reg, hpd_bdw, + ilk_port_hotplug_long_detect); + intel_hpd_irq_handler(dev, pin_mask, long_mask); + found = true; + } + if (tmp & aux_mask) { dp_aux_irq_handler(dev); found = true; @@ -3166,15 +3216,22 @@ static void ilk_hpd_irq_setup(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; u32 hotplug_irqs, hotplug, enabled_irqs; - if (INTEL_INFO(dev)->gen >= 7) { + if (INTEL_INFO(dev)->gen >= 8) { + hotplug_irqs = GEN8_PORT_DP_A_HOTPLUG; + enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_bdw); + + bdw_update_port_irq(dev_priv, hotplug_irqs, enabled_irqs); + } else if (INTEL_INFO(dev)->gen >= 7) { hotplug_irqs = DE_DP_A_HOTPLUG_IVB; enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_ivb); + + ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); } else { hotplug_irqs = DE_DP_A_HOTPLUG; enabled_irqs = intel_hpd_enabled_irqs(dev, hpd_ilk); - } - ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); + ilk_update_display_irq(dev_priv, hotplug_irqs, enabled_irqs); + } /* * Enable digital hotplug on the CPU, and configure the DP short pulse @@ -3486,24 +3543,29 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) { uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE; uint32_t de_pipe_enables; - int pipe; - u32 de_port_en = GEN8_AUX_CHANNEL_A; + u32 de_port_masked = GEN8_AUX_CHANNEL_A; + u32 de_port_enables; + enum pipe pipe; if (IS_GEN9(dev_priv)) { de_pipe_masked |= GEN9_PIPE_PLANE1_FLIP_DONE | GEN9_DE_PIPE_IRQ_FAULT_ERRORS; - de_port_en |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C | - GEN9_AUX_CHANNEL_D; - + de_port_masked |= GEN9_AUX_CHANNEL_B | GEN9_AUX_CHANNEL_C | + GEN9_AUX_CHANNEL_D; if (IS_BROXTON(dev_priv)) - de_port_en |= BXT_DE_PORT_GMBUS; - } else + de_port_masked |= BXT_DE_PORT_GMBUS; + } else { de_pipe_masked |= GEN8_PIPE_PRIMARY_FLIP_DONE | GEN8_DE_PIPE_IRQ_FAULT_ERRORS; + } de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN; + de_port_enables = de_port_masked; + if (IS_BROADWELL(dev_priv)) + de_port_enables |= GEN8_PORT_DP_A_HOTPLUG; + dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked; dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked; dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked; @@ -3515,7 +3577,7 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv) dev_priv->de_irq_mask[pipe], de_pipe_enables); - GEN5_IRQ_INIT(GEN8_DE_PORT_, ~de_port_en, de_port_en); + GEN5_IRQ_INIT(GEN8_DE_PORT_, ~de_port_masked, de_port_enables); } static int gen8_irq_postinstall(struct drm_device *dev) @@ -4298,7 +4360,7 @@ void intel_irq_init(struct drm_i915_private *dev_priv) else if (HAS_PCH_SPT(dev)) dev_priv->display.hpd_irq_setup = spt_hpd_irq_setup; else - dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup; + dev_priv->display.hpd_irq_setup = ilk_hpd_irq_setup; } else if (HAS_PCH_SPLIT(dev)) { dev->driver->irq_handler = ironlake_irq_handler; dev->driver->irq_preinstall = ironlake_irq_reset;