From: John Garry Date: Fri, 8 Apr 2016 09:23:12 +0000 (+0800) Subject: hisi_sas: fix v2 hw multiple SATA disk issue X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3a429d5ab60966cf75d9b99648700823c514b7ad;p=linux-beck.git hisi_sas: fix v2 hw multiple SATA disk issue Intermittently it is found that when multiple SATA disks are directly connected to the host that some disks are not detected. The problem is that all set bitfields in ENT_INT_SRC1 are cleared for all phys in sata_int_v2_hw() - it should clear the set bit for the phy being serviced. Also unnecessary double-write to ENT_INT_SRC1 and ENT_INT_SRC_MSK1 is removed (remaining writes are done at end label). Signed-off-by: John Garry Reviewed-by: Zhangfei Gao Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index f462fc4adc3a..5a7f7092018a 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -2003,12 +2003,10 @@ static irqreturn_t sata_int_v2_hw(int irq_no, void *p) hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk | 1 << phy_no); ent_int = hisi_sas_read32(hisi_hba, ENT_INT_SRC1); - ent_tmp = ent_int; + ent_tmp = ent_int & (1 << (ENT_INT_SRC1_D2H_FIS_CH1_OFF * phy_no)); ent_int >>= ENT_INT_SRC1_D2H_FIS_CH1_OFF * (phy_no % 4); if ((ent_int & ENT_INT_SRC1_D2H_FIS_CH0_MSK) == 0) { dev_warn(dev, "sata int: phy%d did not receive FIS\n", phy_no); - hisi_sas_write32(hisi_hba, ENT_INT_SRC1, ent_tmp); - hisi_sas_write32(hisi_hba, ENT_INT_SRC_MSK1, ent_msk); res = IRQ_NONE; goto end; }