From: Ulf Hansson Date: Wed, 19 Mar 2014 12:38:05 +0000 (+0100) Subject: mmc: mmci: Mark the DT bindings for highspeed mode as deprecated X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3ad418e0f0c8ab78222f2db9547b21a2902d5a21;p=linux-beck.git mmc: mmci: Mark the DT bindings for highspeed mode as deprecated The common mmc DT parser supports bindings for highspeed mode, thus there are no need for mmci to provide it's own versions for these. Mark them as deprecated in the documentation. Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Acked-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt index 2c8756fb7755..03796cf2d3e7 100644 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -15,8 +15,6 @@ Required properties: Optional properties: - arm,primecell-periphid : contains the PrimeCell Peripheral ID, it overrides the ID provided by the HW -- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable. -- mmc-cap-sd-highspeed : indicates whether SD is high speed capable. - vqmmc-supply : phandle to the regulator device tree node, mentioned as the VCCQ/VDD_IO supply in the eMMC/SD specs. - st,sig-dir-dat0 : bus signal direction pin used for DAT[0]. @@ -26,6 +24,10 @@ Optional properties: - st,sig-dir-cmd : cmd signal direction pin used for CMD. - st,sig-pin-fbclk : feedback clock signal pin used. +Deprecated properties: +- mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable. +- mmc-cap-sd-highspeed : indicates whether SD is high speed capable. + Example: sdi0_per1@80126000 { @@ -42,8 +44,8 @@ sdi0_per1@80126000 { max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; cd-gpios = <&gpio2 31 0x4>; // 95 st,sig-dir-dat0; st,sig-dir-dat2;