From: Mark Brown Date: Mon, 1 Feb 2010 19:05:09 +0000 (+0000) Subject: ASoC: Convert WM8993 to use shared cache I/O code X-Git-Tag: v2.6.34-rc1~243^2^2~28 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3bf6e4217e3c69438f6dc41a009664107eb27ab1;p=karo-tx-linux.git ASoC: Convert WM8993 to use shared cache I/O code Saves a little bit of code duplication. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c index 61239e0e9556..3c9336cd4eeb 100644 --- a/sound/soc/codecs/wm8993.c +++ b/sound/soc/codecs/wm8993.c @@ -231,34 +231,6 @@ struct wm8993_priv { int fll_src; }; -static unsigned int wm8993_read_hw(struct snd_soc_codec *codec, u8 reg) -{ - struct i2c_msg xfer[2]; - u16 data; - int ret; - struct i2c_client *i2c = codec->control_data; - - /* Write register */ - xfer[0].addr = i2c->addr; - xfer[0].flags = 0; - xfer[0].len = 1; - xfer[0].buf = ® - - /* Read data */ - xfer[1].addr = i2c->addr; - xfer[1].flags = I2C_M_RD; - xfer[1].len = 2; - xfer[1].buf = (u8 *)&data; - - ret = i2c_transfer(i2c->adapter, xfer, 2); - if (ret != 2) { - dev_err(codec->dev, "Failed to read 0x%x: %d\n", reg, ret); - return 0; - } - - return (data >> 8) | ((data & 0xff) << 8); -} - static int wm8993_volatile(unsigned int reg) { switch (reg) { @@ -273,48 +245,6 @@ static int wm8993_volatile(unsigned int reg) } } -static unsigned int wm8993_read(struct snd_soc_codec *codec, - unsigned int reg) -{ - u16 *reg_cache = codec->reg_cache; - - BUG_ON(reg > WM8993_MAX_REGISTER); - - if (wm8993_volatile(reg)) - return wm8993_read_hw(codec, reg); - else - return reg_cache[reg]; -} - -static int wm8993_write(struct snd_soc_codec *codec, unsigned int reg, - unsigned int value) -{ - u16 *reg_cache = codec->reg_cache; - u8 data[3]; - int ret; - - BUG_ON(reg > WM8993_MAX_REGISTER); - - /* data is - * D15..D9 WM8993 register offset - * D8...D0 register data - */ - data[0] = reg; - data[1] = value >> 8; - data[2] = value & 0x00ff; - - if (!wm8993_volatile(reg)) - reg_cache[reg] = value; - - ret = codec->hw_write(codec->control_data, data, 3); - - if (ret == 3) - return 0; - if (ret < 0) - return ret; - return -EIO; -} - struct _fll_div { u16 fll_fratio; u16 fll_outdiv; @@ -443,9 +373,9 @@ static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source, wm8993->fll_fref = 0; wm8993->fll_fout = 0; - reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1); + reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1); reg1 &= ~WM8993_FLL_ENA; - wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1); + snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1); return 0; } @@ -454,7 +384,7 @@ static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source, if (ret != 0) return ret; - reg5 = wm8993_read(codec, WM8993_FLL_CONTROL_5); + reg5 = snd_soc_read(codec, WM8993_FLL_CONTROL_5); reg5 &= ~WM8993_FLL_CLK_SRC_MASK; switch (fll_id) { @@ -476,33 +406,33 @@ static int wm8993_set_fll(struct snd_soc_dai *dai, int fll_id, int source, /* Any FLL configuration change requires that the FLL be * disabled first. */ - reg1 = wm8993_read(codec, WM8993_FLL_CONTROL_1); + reg1 = snd_soc_read(codec, WM8993_FLL_CONTROL_1); reg1 &= ~WM8993_FLL_ENA; - wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1); + snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1); /* Apply the configuration */ if (fll_div.k) reg1 |= WM8993_FLL_FRAC_MASK; else reg1 &= ~WM8993_FLL_FRAC_MASK; - wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1); + snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1); - wm8993_write(codec, WM8993_FLL_CONTROL_2, - (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) | - (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT)); - wm8993_write(codec, WM8993_FLL_CONTROL_3, fll_div.k); + snd_soc_write(codec, WM8993_FLL_CONTROL_2, + (fll_div.fll_outdiv << WM8993_FLL_OUTDIV_SHIFT) | + (fll_div.fll_fratio << WM8993_FLL_FRATIO_SHIFT)); + snd_soc_write(codec, WM8993_FLL_CONTROL_3, fll_div.k); - reg4 = wm8993_read(codec, WM8993_FLL_CONTROL_4); + reg4 = snd_soc_read(codec, WM8993_FLL_CONTROL_4); reg4 &= ~WM8993_FLL_N_MASK; reg4 |= fll_div.n << WM8993_FLL_N_SHIFT; - wm8993_write(codec, WM8993_FLL_CONTROL_4, reg4); + snd_soc_write(codec, WM8993_FLL_CONTROL_4, reg4); reg5 &= ~WM8993_FLL_CLK_REF_DIV_MASK; reg5 |= fll_div.fll_clk_ref_div << WM8993_FLL_CLK_REF_DIV_SHIFT; - wm8993_write(codec, WM8993_FLL_CONTROL_5, reg5); + snd_soc_write(codec, WM8993_FLL_CONTROL_5, reg5); /* Enable the FLL */ - wm8993_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA); + snd_soc_write(codec, WM8993_FLL_CONTROL_1, reg1 | WM8993_FLL_ENA); dev_dbg(codec->dev, "FLL enabled at %dHz->%dHz\n", Fref, Fout); @@ -523,7 +453,7 @@ static int configure_clock(struct snd_soc_codec *codec) case WM8993_SYSCLK_MCLK: dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8993->mclk_rate); - reg = wm8993_read(codec, WM8993_CLOCKING_2); + reg = snd_soc_read(codec, WM8993_CLOCKING_2); reg &= ~(WM8993_MCLK_DIV | WM8993_SYSCLK_SRC); if (wm8993->mclk_rate > 13500000) { reg |= WM8993_MCLK_DIV; @@ -532,14 +462,14 @@ static int configure_clock(struct snd_soc_codec *codec) reg &= ~WM8993_MCLK_DIV; wm8993->sysclk_rate = wm8993->mclk_rate; } - wm8993_write(codec, WM8993_CLOCKING_2, reg); + snd_soc_write(codec, WM8993_CLOCKING_2, reg); break; case WM8993_SYSCLK_FLL: dev_dbg(codec->dev, "Using %dHz FLL clock\n", wm8993->fll_fout); - reg = wm8993_read(codec, WM8993_CLOCKING_2); + reg = snd_soc_read(codec, WM8993_CLOCKING_2); reg |= WM8993_SYSCLK_SRC; if (wm8993->fll_fout > 13500000) { reg |= WM8993_MCLK_DIV; @@ -548,7 +478,7 @@ static int configure_clock(struct snd_soc_codec *codec) reg &= ~WM8993_MCLK_DIV; wm8993->sysclk_rate = wm8993->fll_fout; } - wm8993_write(codec, WM8993_CLOCKING_2, reg); + snd_soc_write(codec, WM8993_CLOCKING_2, reg); break; default: @@ -1083,8 +1013,8 @@ static int wm8993_set_dai_fmt(struct snd_soc_dai *dai, { struct snd_soc_codec *codec = dai->codec; struct wm8993_priv *wm8993 = codec->private_data; - unsigned int aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1); - unsigned int aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4); + unsigned int aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1); + unsigned int aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4); aif1 &= ~(WM8993_BCLK_DIR | WM8993_AIF_BCLK_INV | WM8993_AIF_LRCLK_INV | WM8993_AIF_FMT_MASK); @@ -1167,8 +1097,8 @@ static int wm8993_set_dai_fmt(struct snd_soc_dai *dai, return -EINVAL; } - wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1); - wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4); + snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1); + snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4); return 0; } @@ -1182,16 +1112,16 @@ static int wm8993_hw_params(struct snd_pcm_substream *substream, int ret, i, best, best_val, cur_val; unsigned int clocking1, clocking3, aif1, aif4; - clocking1 = wm8993_read(codec, WM8993_CLOCKING_1); + clocking1 = snd_soc_read(codec, WM8993_CLOCKING_1); clocking1 &= ~WM8993_BCLK_DIV_MASK; - clocking3 = wm8993_read(codec, WM8993_CLOCKING_3); + clocking3 = snd_soc_read(codec, WM8993_CLOCKING_3); clocking3 &= ~(WM8993_CLK_SYS_RATE_MASK | WM8993_SAMPLE_RATE_MASK); - aif1 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_1); + aif1 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_1); aif1 &= ~WM8993_AIF_WL_MASK; - aif4 = wm8993_read(codec, WM8993_AUDIO_INTERFACE_4); + aif4 = snd_soc_read(codec, WM8993_AUDIO_INTERFACE_4); aif4 &= ~WM8993_LRCLK_RATE_MASK; /* What BCLK do we need? */ @@ -1284,14 +1214,14 @@ static int wm8993_hw_params(struct snd_pcm_substream *substream, dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8993->bclk / wm8993->fs); aif4 |= wm8993->bclk / wm8993->fs; - wm8993_write(codec, WM8993_CLOCKING_1, clocking1); - wm8993_write(codec, WM8993_CLOCKING_3, clocking3); - wm8993_write(codec, WM8993_AUDIO_INTERFACE_1, aif1); - wm8993_write(codec, WM8993_AUDIO_INTERFACE_4, aif4); + snd_soc_write(codec, WM8993_CLOCKING_1, clocking1); + snd_soc_write(codec, WM8993_CLOCKING_3, clocking3); + snd_soc_write(codec, WM8993_AUDIO_INTERFACE_1, aif1); + snd_soc_write(codec, WM8993_AUDIO_INTERFACE_4, aif4); /* ReTune Mobile? */ if (wm8993->pdata.num_retune_configs) { - u16 eq1 = wm8993_read(codec, WM8993_EQ1); + u16 eq1 = snd_soc_read(codec, WM8993_EQ1); struct wm8993_retune_mobile_setting *s; best = 0; @@ -1314,7 +1244,7 @@ static int wm8993_hw_params(struct snd_pcm_substream *substream, snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, 0); for (i = 1; i < ARRAY_SIZE(s->config); i++) - wm8993_write(codec, WM8993_EQ1 + i, s->config[i]); + snd_soc_write(codec, WM8993_EQ1 + i, s->config[i]); snd_soc_update_bits(codec, WM8993_EQ1, WM8993_EQ_ENA, eq1); } @@ -1327,14 +1257,14 @@ static int wm8993_digital_mute(struct snd_soc_dai *codec_dai, int mute) struct snd_soc_codec *codec = codec_dai->codec; unsigned int reg; - reg = wm8993_read(codec, WM8993_DAC_CTRL); + reg = snd_soc_read(codec, WM8993_DAC_CTRL); if (mute) reg |= WM8993_DAC_MUTE; else reg &= ~WM8993_DAC_MUTE; - wm8993_write(codec, WM8993_DAC_CTRL, reg); + snd_soc_write(codec, WM8993_DAC_CTRL, reg); return 0; } @@ -1586,9 +1516,7 @@ static int wm8993_i2c_probe(struct i2c_client *i2c, INIT_LIST_HEAD(&codec->dapm_paths); codec->name = "WM8993"; - codec->read = wm8993_read; - codec->write = wm8993_write; - codec->hw_write = (hw_write_t)i2c_master_send; + codec->volatile_register = wm8993_volatile; codec->reg_cache = wm8993->reg_cache; codec->reg_cache_size = ARRAY_SIZE(wm8993->reg_cache); codec->bias_level = SND_SOC_BIAS_OFF; @@ -1603,20 +1531,26 @@ static int wm8993_i2c_probe(struct i2c_client *i2c, memcpy(wm8993->reg_cache, wm8993_reg_defaults, sizeof(wm8993->reg_cache)); + ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C); + if (ret != 0) { + dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret); + goto err; + } + i2c_set_clientdata(i2c, wm8993); codec->control_data = i2c; wm8993_codec = codec; codec->dev = &i2c->dev; - val = wm8993_read_hw(codec, WM8993_SOFTWARE_RESET); + val = snd_soc_read(codec, WM8993_SOFTWARE_RESET); if (val != wm8993_reg_defaults[WM8993_SOFTWARE_RESET]) { dev_err(codec->dev, "Invalid ID register value %x\n", val); ret = -EINVAL; goto err; } - ret = wm8993_write(codec, WM8993_SOFTWARE_RESET, 0xffff); + ret = snd_soc_write(codec, WM8993_SOFTWARE_RESET, 0xffff); if (ret != 0) goto err;