From: Mark Rustad Date: Fri, 20 Nov 2015 21:12:17 +0000 (-0800) Subject: ixgbe: Correct X550EM_x revision check X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3ca2b2506ec9a3b1615930a6810d30ec9aba10a1;p=linux-beck.git ixgbe: Correct X550EM_x revision check The X550EM_x revision check needs to check a value, not just a bit. Use a mask and check the value. Also remove the redundant check inside the ixgbe_enter_lplu_t_x550em, because it can only be called when both the mac type and revision check pass. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 06add27c8b8c..5f53cc6c609a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -3520,7 +3520,7 @@ struct ixgbe_info { #define IXGBE_FUSES0_GROUP(_i) (0x11158 + ((_i) * 4)) #define IXGBE_FUSES0_300MHZ BIT(5) -#define IXGBE_FUSES0_REV1 BIT(6) +#define IXGBE_FUSES0_REV_MASK (3 << 6) #define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P) ? 0x8010 : 0x4010) #define IXGBE_KRM_LINK_CTRL_1(P) ((P) ? 0x820C : 0x420C) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index f4ef0d1a5dbe..87aca3f7c3de 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -1857,10 +1857,6 @@ static s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) u32 save_autoneg; bool link_up; - /* SW LPLU not required on later HW revisions. */ - if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))) - return 0; - /* If blocked by MNG FW, then don't restart AN */ if (ixgbe_check_reset_blocked(hw)) return 0; @@ -2000,8 +1996,9 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) ixgbe_setup_internal_phy_t_x550em; /* setup SW LPLU only for first revision */ - if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, - IXGBE_FUSES0_GROUP(0)))) + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)) & + IXGBE_FUSES0_REV_MASK)) phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em;