From: Guennadi Liakhovetski Date: Fri, 15 Feb 2013 15:14:01 +0000 (+0100) Subject: mmc: add DT bindings for more MMC capability flags X-Git-Tag: next-20130220~55^2~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3d1ed8d342421f7438f4761c8d4cfe499e7daf9f;p=karo-tx-linux.git mmc: add DT bindings for more MMC capability flags Many MMC capability flags are platform-dependent and are traditionally set in platform data. With DT often each such capability requires a special binding. Add bindings for MMC_CAP_SD_HIGHSPEED, MMC_CAP_MMC_HIGHSPEED, MMC_CAP_POWER_OFF_CARD and MMC_CAP_SDIO_IRQ capabilities. Also add code to DT parser to look up "keep-power-in-suspend" and "enable-sdio-wakeup" bindings and set MMC_PM_KEEP_POWER and MMC_PM_WAKE_SDIO_IRQ respectively, if found. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 654b705fc5b7..85aada2263d5 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -24,6 +24,10 @@ Optional properties: - max-frequency: maximum operating clock frequency - no-1-8-v: when present, denotes that 1.8v card voltage is not supported on this system, even if the controller claims it is. +- cap-sd-highspeed: SD high-speed timing is supported +- cap-mmc-highspeed: MMC high-speed timing is supported +- cap-power-off-card: powering off the card is safe +- cap-sdio-irq: enable SDIO IRQ signalling on this interface *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 9c53452e73e1..821cd8224137 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -400,6 +400,19 @@ void mmc_of_parse(struct mmc_host *host) } if (explicit_inv_wp ^ gpio_inv_wp) host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + if (of_find_property(np, "cap-sd-highspeed", &len)) + host->caps |= MMC_CAP_SD_HIGHSPEED; + if (of_find_property(np, "cap-mmc-highspeed", &len)) + host->caps |= MMC_CAP_MMC_HIGHSPEED; + if (of_find_property(np, "cap-power-off-card", &len)) + host->caps |= MMC_CAP_POWER_OFF_CARD; + if (of_find_property(np, "cap-sdio-irq", &len)) + host->caps |= MMC_CAP_SDIO_IRQ; + if (of_find_property(np, "keep-power-in-suspend", &len)) + host->pm_caps |= MMC_PM_KEEP_POWER; + if (of_find_property(np, "enable-sdio-wakeup", &len)) + host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; } EXPORT_SYMBOL(mmc_of_parse);