From: Eyal Shapira Date: Fri, 16 Jan 2015 20:37:04 +0000 (+0200) Subject: iwlwifi: mvm: add beamformer support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3d44eebf773950dd2e24ad7ac786b589d6522d67;p=linux-beck.git iwlwifi: mvm: add beamformer support VHT Beamformer (BFER) will be used if the peer supports it and there's a benefit to use it vs. STBC or SISO. The driver now tells the FW whether BFER and/or STBC are allowed but the FW will make the decision to use either or stick to SISO on its own. BFER is limited to a single remote peer. The driver takes care of ensuring this to the FW and prioritizes with which peer BFER will be used. Signed-off-by: Eyal Shapira Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index e4f589898eda..016d91384681 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -270,6 +270,7 @@ enum iwl_ucode_tlv_api { * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3 * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan. + * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current * tx power value into TPC Report action frame and Link Measurement Report @@ -288,6 +289,7 @@ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0), IWL_UCODE_TLV_CAPA_LAR_SUPPORT = BIT(1), IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2), + IWL_UCODE_TLV_CAPA_BEAMFORMER = BIT(3), IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6), IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8), IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9), diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h index 6a2a6b0ab91b..4c33f2775dc9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h @@ -308,16 +308,33 @@ enum { #define LQ_FLAG_DYNAMIC_BW_POS 6 #define LQ_FLAG_DYNAMIC_BW_MSK (1 << LQ_FLAG_DYNAMIC_BW_POS) -/* Single Stream Parameters - * SS_STBC/BFER_ALLOWED - Controls whether STBC or Beamformer (BFER) is allowed - * ucode will make a smart decision between SISO/STBC/BFER - * SS_PARAMS_VALID - if not set ignore the ss_params field. +/* Single Stream Tx Parameters (lq_cmd->ss_params) + * Flags to control a smart FW decision about whether BFER/STBC/SISO will be + * used for single stream Tx. */ -enum { - RS_SS_STBC_ALLOWED = BIT(0), - RS_SS_BFER_ALLOWED = BIT(1), - RS_SS_PARAMS_VALID = BIT(31), -}; + +/* Bit 0-1: Max STBC streams allowed. Can be 0-3. + * (0) - No STBC allowed + * (1) - 2x1 STBC allowed (HT/VHT) + * (2) - 4x2 STBC allowed (HT/VHT) + * (3) - 3x2 STBC allowed (HT only) + * All our chips are at most 2 antennas so only (1) is valid for now. + */ +#define LQ_SS_STBC_ALLOWED_POS 0 +#define LQ_SS_STBC_ALLOWED_MSK (3 << LQ_SS_STBC_ALLOWED_MSK) + +/* 2x1 STBC is allowed */ +#define LQ_SS_STBC_1SS_ALLOWED (1 << LQ_SS_STBC_ALLOWED_POS) + +/* Bit 2: Beamformer (VHT only) is allowed */ +#define LQ_SS_BFER_ALLOWED_POS 2 +#define LQ_SS_BFER_ALLOWED (1 << LQ_SS_BFER_ALLOWED_POS) + +/* Bit 31: ss_params field is valid. Used for FW backward compatibility + * with other drivers which don't support the ss_params API yet + */ +#define LQ_SS_PARAMS_VALID_POS 31 +#define LQ_SS_PARAMS_VALID (1 << LQ_SS_PARAMS_VALID_POS) /** * struct iwl_lq_cmd - link quality command diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index cfd7bfcb3fc6..51e02e6ba0ac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -401,10 +401,15 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels) hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &mvm->nvm_data->bands[IEEE80211_BAND_2GHZ]; - if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) + if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) { hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &mvm->nvm_data->bands[IEEE80211_BAND_5GHZ]; + if (mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_BEAMFORMER) + hw->wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap.cap |= + IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE; + } + hw->wiphy->hw_version = mvm->trans->hw_id; if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM) diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 9f32f2db95bd..95b718b4f8ab 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1805,7 +1805,7 @@ static bool rs_stbc_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta, /* Our chip supports Tx STBC and the peer is an HT/VHT STA which * supports STBC of at least 1*SS */ - if (!lq_sta->stbc) + if (!lq_sta->stbc_capable) return false; if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) @@ -2626,7 +2626,7 @@ static void rs_ht_init(struct iwl_mvm *mvm, if (mvm->cfg->ht_params->stbc && (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC)) - lq_sta->stbc = true; + lq_sta->stbc_capable = true; lq_sta->is_vht = false; } @@ -2645,7 +2645,12 @@ static void rs_vht_init(struct iwl_mvm *mvm, if (mvm->cfg->ht_params->stbc && (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK)) - lq_sta->stbc = true; + lq_sta->stbc_capable = true; + + if ((mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_BEAMFORMER) && + (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) && + (vht_cap->cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE)) + lq_sta->bfer_capable = true; lq_sta->is_vht = true; } @@ -2778,11 +2783,12 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, rs_get_max_rate_from_mask(lq_sta->active_mimo2_rate); IWL_DEBUG_RATE(mvm, - "RATE MASK: LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d LDPC=%d STBC=%d\n", + "LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d LDPC=%d STBC=%d BFER=%d\n", lq_sta->active_legacy_rate, lq_sta->active_siso_rate, lq_sta->active_mimo2_rate, - lq_sta->is_vht, lq_sta->ldpc, lq_sta->stbc); + lq_sta->is_vht, lq_sta->ldpc, lq_sta->stbc_capable, + lq_sta->bfer_capable); IWL_DEBUG_RATE(mvm, "MAX RATE: LEGACY=%d SISO=%d MIMO2=%d\n", lq_sta->max_legacy_rate_idx, lq_sta->max_siso_rate_idx, @@ -2916,23 +2922,15 @@ static void rs_build_rates_table(struct iwl_mvm *mvm, u8 valid_tx_ant = 0; struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; bool toggle_ant = false; - bool stbc_allowed = false; memcpy(&rate, initial_rate, sizeof(rate)); valid_tx_ant = iwl_mvm_get_valid_tx_ant(mvm); - stbc_allowed = rs_stbc_allow(mvm, sta, lq_sta); - if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LQ_SS_PARAMS) { - u32 ss_params = RS_SS_PARAMS_VALID; - - if (stbc_allowed) - ss_params |= RS_SS_STBC_ALLOWED; - lq_cmd->ss_params = cpu_to_le32(ss_params); - } else { - /* TODO: remove old API when min FW API hits 14 */ - rate.stbc = stbc_allowed; - } + /* TODO: remove old API when min FW API hits 14 */ + if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LQ_SS_PARAMS) && + rs_stbc_allow(mvm, sta, lq_sta)) + rate.stbc = true; if (is_siso(&rate)) { num_rates = IWL_MVM_RS_INITIAL_SISO_NUM_RATES; @@ -2980,6 +2978,128 @@ static void rs_build_rates_table(struct iwl_mvm *mvm, } +struct rs_bfer_active_iter_data { + struct ieee80211_sta *exclude_sta; + struct iwl_mvm_sta *bfer_mvmsta; +}; + +static void rs_bfer_active_iter(void *_data, + struct ieee80211_sta *sta) +{ + struct rs_bfer_active_iter_data *data = _data; + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_lq_cmd *lq_cmd = &mvmsta->lq_sta.lq; + u32 ss_params = le32_to_cpu(lq_cmd->ss_params); + + if (sta == data->exclude_sta) + return; + + /* The current sta has BFER allowed */ + if (ss_params & LQ_SS_BFER_ALLOWED) { + WARN_ON_ONCE(data->bfer_mvmsta != NULL); + + data->bfer_mvmsta = mvmsta; + } +} + +static int rs_bfer_priority(struct iwl_mvm_sta *sta) +{ + int prio = -1; + enum nl80211_iftype viftype = ieee80211_vif_type_p2p(sta->vif); + + switch (viftype) { + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_P2P_GO: + prio = 3; + break; + case NL80211_IFTYPE_P2P_CLIENT: + prio = 2; + break; + case NL80211_IFTYPE_STATION: + prio = 1; + break; + default: + WARN_ONCE(true, "viftype %d sta_id %d", viftype, sta->sta_id); + prio = -1; + } + + return prio; +} + +/* Returns >0 if sta1 has a higher BFER priority compared to sta2 */ +static int rs_bfer_priority_cmp(struct iwl_mvm_sta *sta1, + struct iwl_mvm_sta *sta2) +{ + int prio1 = rs_bfer_priority(sta1); + int prio2 = rs_bfer_priority(sta2); + + if (prio1 > prio2) + return 1; + if (prio1 < prio2) + return -1; + return 0; +} + +static void rs_set_lq_ss_params(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + struct iwl_lq_sta *lq_sta, + const struct rs_rate *initial_rate) +{ + struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + struct rs_bfer_active_iter_data data = { + .exclude_sta = sta, + .bfer_mvmsta = NULL, + }; + struct iwl_mvm_sta *bfer_mvmsta = NULL; + u32 ss_params = LQ_SS_PARAMS_VALID; + + if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta)) + goto out; + + if (lq_sta->stbc_capable) + ss_params |= LQ_SS_STBC_1SS_ALLOWED; + + if (!lq_sta->bfer_capable) + goto out; + + ieee80211_iterate_stations_atomic(mvm->hw, + rs_bfer_active_iter, + &data); + bfer_mvmsta = data.bfer_mvmsta; + + /* This code is safe as it doesn't run concurrently for different + * stations. This is guaranteed by the fact that calls to + * ieee80211_tx_status wouldn't run concurrently for a single HW. + */ + if (!bfer_mvmsta) { + IWL_DEBUG_RATE(mvm, "No sta with BFER allowed found. Allow\n"); + + ss_params |= LQ_SS_BFER_ALLOWED; + goto out; + } + + IWL_DEBUG_RATE(mvm, "Found existing sta %d with BFER activated\n", + bfer_mvmsta->sta_id); + + /* Disallow BFER on another STA if active and we're a higher priority */ + if (rs_bfer_priority_cmp(mvmsta, bfer_mvmsta) > 0) { + struct iwl_lq_cmd *bfersta_lq_cmd = &bfer_mvmsta->lq_sta.lq; + u32 bfersta_ss_params = le32_to_cpu(bfersta_lq_cmd->ss_params); + + bfersta_ss_params &= ~LQ_SS_BFER_ALLOWED; + bfersta_lq_cmd->ss_params = cpu_to_le32(bfersta_ss_params); + iwl_mvm_send_lq_cmd(mvm, bfersta_lq_cmd, false); + + ss_params |= LQ_SS_BFER_ALLOWED; + IWL_DEBUG_RATE(mvm, + "Lower priority BFER sta found (%d). Switch BFER\n", + bfer_mvmsta->sta_id); + } +out: + lq_cmd->ss_params = cpu_to_le32(ss_params); +} + static void rs_fill_lq_cmd(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta, @@ -3006,6 +3126,9 @@ static void rs_fill_lq_cmd(struct iwl_mvm *mvm, rs_build_rates_table(mvm, sta, lq_sta, initial_rate); + if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LQ_SS_PARAMS) + rs_set_lq_ss_params(mvm, sta, lq_sta, initial_rate); + if (num_of_ant(initial_rate->ant) == 1) lq_cmd->single_stream_ant_msk = initial_rate->ant; diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h index f8f5bf21cc38..ba57f5ae2375 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/iwlwifi/mvm/rs.h @@ -293,7 +293,9 @@ struct iwl_lq_sta { u64 last_tx; bool is_vht; bool ldpc; /* LDPC Rx is supported by the STA */ - bool stbc; /* Tx STBC is supported by chip and Rx by STA */ + bool stbc_capable; /* Tx STBC is supported by chip and Rx by STA */ + bool bfer_capable; /* Remote supports beamformee and we BFer */ + enum ieee80211_band band; /* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */