From: Priit Laes <plaes@plaes.org>
Date: Sun, 20 Dec 2015 18:36:03 +0000 (+0200)
Subject: staging: fbtft: Use standard MIPI DCS command defines for s6d02a1
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3d6924dd6ae2ce8a90b4899c8f1cceeecd52aa22;p=linux-beck.git

staging: fbtft: Use standard MIPI DCS command defines for s6d02a1

This patch makes use of the standard MIPI Display Command Set to remove
some of the magic constants found in source code.

Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/fbtft/fb_s6d02a1.c b/drivers/staging/fbtft/fb_s6d02a1.c
index da85057eb3e0..3113355062fc 100644
--- a/drivers/staging/fbtft/fb_s6d02a1.c
+++ b/drivers/staging/fbtft/fb_s6d02a1.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <video/mipi_display.h>
 
 #include "fbtft.h"
 
@@ -50,7 +51,7 @@ static int default_init_sequence[] = {
 
 	-1, 0xf3, 0x00, 0x00,
 
-	-1, 0x11,
+	-1, MIPI_DCS_EXIT_SLEEP_MODE,
 	-2, 50,
 
 	-1, 0xf3, 0x00, 0x01,
@@ -79,18 +80,18 @@ static int default_init_sequence[] = {
 
 	/* initializing sequence */
 
-	-1, 0x36, 0x08,
+	-1, MIPI_DCS_SET_ADDRESS_MODE, 0x08,
 
-	-1, 0x35, 0x00,
+	-1, MIPI_DCS_SET_TEAR_ON, 0x00,
 
-	-1, 0x3a, 0x05,
+	-1, MIPI_DCS_SET_PIXEL_FORMAT, 0x05,
 
-	/* gamma setting sequence */
-	-1, 0x26, 0x01,	/* preset gamma curves, possible values 0x01, 0x02, 0x04, 0x08 */
+	/* gamma setting - possible values 0x01, 0x02, 0x04, 0x08 */
+	-1, MIPI_DCS_SET_GAMMA_CURVE, 0x01,
 
 	-2, 150,
-	-1, 0x29,
-	-1, 0x2c,
+	-1, MIPI_DCS_SET_DISPLAY_ON,
+	-1, MIPI_DCS_WRITE_MEMORY_START,
 	/* end marker */
 	-3
 
@@ -98,14 +99,13 @@ static int default_init_sequence[] = {
 
 static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 {
-	/* Column address */
-	write_reg(par, 0x2A, xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
+	write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS,
+		  xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF);
 
-	/* Row address */
-	write_reg(par, 0x2B, ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
+	write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS,
+		  ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF);
 
-	/* Memory write */
-	write_reg(par, 0x2C);
+	write_reg(par, MIPI_DCS_WRITE_MEMORY_START);
 }
 
 #define MY BIT(7)
@@ -113,7 +113,7 @@ static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
 #define MV BIT(5)
 static int set_var(struct fbtft_par *par)
 {
-	/* MADCTL - Memory data access control
+	/* Memory data access control (0x36h)
 	     RGB/BGR:
 		1. Mode selection pin SRGB
 			RGB H/W pin for color filter setting: 0=RGB, 1=BGR
@@ -121,16 +121,20 @@ static int set_var(struct fbtft_par *par)
 			RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR */
 	switch (par->info->var.rotate) {
 	case 0:
-		write_reg(par, 0x36, MX | MY | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MY | (par->bgr << 3));
 		break;
 	case 270:
-		write_reg(par, 0x36, MY | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MY | MV | (par->bgr << 3));
 		break;
 	case 180:
-		write_reg(par, 0x36, par->bgr << 3);
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  par->bgr << 3);
 		break;
 	case 90:
-		write_reg(par, 0x36, MX | MV | (par->bgr << 3));
+		write_reg(par, MIPI_DCS_SET_ADDRESS_MODE,
+			  MX | MV | (par->bgr << 3));
 		break;
 	}